← Commit history

Initial commit: component/lm3478mmx

Ray ·6ceb0bb1e4 ·
2 files changed +85
README.mdadded+51
@@ -0,0 +1,51 @@+# LM3478MMX++**Texas Instruments** · AC-DC Controllers and Regulators · VSSOP-8-0.65mm++LM3478MMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ISEN | input | Current sense input pin. The voltage generated across an external sense resistor (RSEN) in series with the source of the external N-channel MOSFET is fed into this pin for cycle-by-cycle current-mode control and current limiting. Absolute maximum pin voltage is 500 mV. |+| 2 | COMP | output | Compensation pin. A series resistor-capacitor network connected from this pin to AGND provides frequency compensation for the current-mode control loop. This pin is the output of the internal transconductance error amplifier. |+| 3 | FB | input | Feedback pin. Inverting input of the internal error amplifier; the output voltage should be adjusted using an external resistor divider to provide 1.26 V (nominal internal reference) at this pin. Absolute max: -0.4 V to 7 V. |+| 4 | AGND | power_in | Analog ground pin. Reference for the internal reference, error amplifier, and other small-signal circuitry. Should be tied to PGND at a single point (typically at the input capacitor return) to avoid ground loop noise. |+| 5 | PGND | power_in | Power ground pin. Return path for the high-current internal MOSFET gate driver (DR pin). Should be routed with a low-impedance connection back to the source of the external MOSFET / sense resistor. |+| 6 | DR | output | Drive pin. Output of the internal push-pull gate driver (1-A peak current capability) that drives the gate of the external low-side N-channel MOSFET. Pin voltage range is -0.4 V to 8 V (internally clamped for gate protection). |+| 7 | FA/SD | input | Frequency-adjust and shutdown pin. A resistor from this pin to AGND sets the internal oscillator frequency between 100 kHz and 1 MHz. Driving this pin high for longer than 30 µs shuts the device down, reducing supply current to less than 10 µA. Absolute max: -0.4 V to 7 V. |+| 8 | VIN | power_in | Power supply input pin. Provides bias to the internal control circuitry and the gate driver. Recommended operating range 2.97 V to 40 V; absolute maximum 45 V. Should be bypassed with a local ceramic capacitor to PGND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8-0.65mm |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `LM3478MMX`+- `LM3478MMXMM/NOPB`+- `LM3478MMX/NOPB`+- `LM3478MMXM`+- `LM3478MMXM/NOPB`++## CAD (KiCad official)++- Symbol: `LM3478MMX`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm3478mmx.pdf) (None pp, sha256 `2135239904e04d87`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3478mmx-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lm3478mmx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers and Regulators, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "lm3478mmx"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm3478mmx.kicad_sym",+    "lm3478mmx.kicad_mod",+    "lm3478mmx.glb",+    "lm3478mmx.step",+    "lm3478mmx.lbr",+    "docs/hero.png",+    "docs/lm3478mmx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file