← Commit history

Initial commit: component/lm3421mhx

Ray ·792ad03830 ·
2 files changed +263
README.mdadded+54
@@ -0,0 +1,54 @@+# LM3421MHX++**Texas Instruments** · LED Drivers · TSSOP-16-EP++LM3421MHX from Texas Instruments, in a TSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input voltage supply from 4.5V to 75V; bypass with 100-nF capacitor to AGND as close to the device as possible. |+| 2 | EN | input | Enable pin with 2.4V logic threshold; connect to AGND for zero-current shutdown or apply more than 2.4V to enable. |+| 3 | COMP | input | Compensation input; connect capacitor to AGND to set control loop compensation. |+| 4 | CSH | input | Current sense high input; connect resistor to AGND to set signal current or use as analog dimming control with potentiometer. |+| 5 | RCT | input | Resistor-capacitor timing input; external RC network sets predictive off-time and switching frequency. |+| 6 | AGND | power_in | Analog ground; connect to PGND through DAP copper pad to provide ground return for CSH, COMP, RCT, and related analog circuits. |+| 7 | OVP | input | Overvoltage protection input with 1.24V threshold; connect resistor divider from output voltage to program OVLO trip point. |+| 8 | nDIM | input | Dimming input and undervoltage protection with 1.24V threshold; accepts PWM signal for dimming or resistor divider for UVLO programming. |+| 9 | DDRV | output | Dim gate drive output; driven from internal PWM logic to control dimming MOSFET gate, sourcing 13.5Ω and sinking 3.5Ω typical. |+| 10 | PGND | power_in | Power ground; connect to AGND through DAP copper pad to provide ground return for GATE and DDRV driver outputs. |+| 11 | GATE | output | Main gate drive output; connects to main power switch MOSFET gate, sourcing 2Ω and sinking 1.3Ω typical at 1A peak. |+| 12 | VCC | power_out | Internal regulator output nominally 6.9V (min 6.3V, max 7.35V); bypass with 2.2-µF to 3.3-µF ceramic capacitor to PGND. |+| 13 | IS | input | Main switch current sense input; connect to MOSFET drain for RDS-ON sensing or to source-side sense resistor for cycle-by-cycle current limit at 245mV threshold. |+| 14 | RPD | output | Resistor pulldown open-drain output; connects bottom of external resistor dividers to ground for zero-current shutdown with 145Ω pulldown resistance typical. |+| 15 | HSP | input | LED current sense positive input; connect through series resistor to high side of LED string sense resistor for high-side differential current sensing. |+| 16 | HSN | input | LED current sense negative input; connect through series resistor to low side of LED string sense resistor for high-side differential current sensing. |+| 17 | DAP | power_in | Die attach pad thermal connection on bottom of IC; star ground connecting AGND and PGND for low-impedance power/ground return. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16-EP |+| Category | LED Drivers |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `LM3421MHX`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `lm3421mhx-etched.step` / `lm3421mhx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm3421mhx.step` / `lm3421mhx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm3421) (79 pp, sha256 `37e8739d38bb6fd4`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3421mhx-datasheet.pdf)
page.jsonadded+209
@@ -0,0 +1,209 @@+{+  "slug": "lm3421mhx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, TSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "lm3421mhx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm3421mhx.kicad_sym",+    "lm3421mhx.kicad_mod",+    "lm3421mhx.glb",+    "lm3421mhx.step",+    "lm3421mhx.lbr",+    "docs/hero.png",+    "docs/lm3421mhx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM3421MHX",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16-EP",+    "pin_count": 17,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3421",+    "parts": {+      "symbol": "lm3421mhx.kicad_sym",+      "footprint": "lm3421mhx.kicad_mod",+      "model_3d": "lm3421mhx-etched.glb",+      "model_3d_plain": "lm3421mhx.glb",+      "model_3d_step": "lm3421mhx-etched.step",+      "model_3d_step_plain": "lm3421mhx.step",+      "lbr": "lm3421mhx.lbr"+    },+    "distributor_links": {+      "lcsc": "C93955"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T11:00:47Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input voltage supply from 4.5V to 75V; bypass with 100-nF capacitor to AGND as close to the device as possible."+      },+      {+        "number": "2",+        "name": "EN",+        "type": "input",+        "description": "Enable pin with 2.4V logic threshold; connect to AGND for zero-current shutdown or apply more than 2.4V to enable."+      },+      {+        "number": "3",+        "name": "COMP",+        "type": "input",+        "description": "Compensation input; connect capacitor to AGND to set control loop compensation."+      },+      {+        "number": "4",+        "name": "CSH",+        "type": "input",+        "description": "Current sense high input; connect resistor to AGND to set signal current or use as analog dimming control with potentiometer."+      },+      {+        "number": "5",+        "name": "RCT",+        "type": "input",+        "description": "Resistor-capacitor timing input; external RC network sets predictive off-time and switching frequency."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground; connect to PGND through DAP copper pad to provide ground return for CSH, COMP, RCT, and related analog circuits."+      },+      {+        "number": "7",+        "name": "OVP",+        "type": "input",+        "description": "Overvoltage protection input with 1.24V threshold; connect resistor divider from output voltage to program OVLO trip point."+      },+      {+        "number": "8",+        "name": "nDIM",+        "type": "input",+        "description": "Dimming input and undervoltage protection with 1.24V threshold; accepts PWM signal for dimming or resistor divider for UVLO programming."+      },+      {+        "number": "9",+        "name": "DDRV",+        "type": "output",+        "description": "Dim gate drive output; driven from internal PWM logic to control dimming MOSFET gate, sourcing 13.5Ω and sinking 3.5Ω typical."+      },+      {+        "number": "10",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground; connect to AGND through DAP copper pad to provide ground return for GATE and DDRV driver outputs."+      },+      {+        "number": "11",+        "name": "GATE",+        "type": "output",+        "description": "Main gate drive output; connects to main power switch MOSFET gate, sourcing 2Ω and sinking 1.3Ω typical at 1A peak."+      },+      {+        "number": "12",+        "name": "VCC",+        "type": "power_out",+        "description": "Internal regulator output nominally 6.9V (min 6.3V, max 7.35V); bypass with 2.2-µF to 3.3-µF ceramic capacitor to PGND."+      },+      {+        "number": "13",+        "name": "IS",+        "type": "input",+        "description": "Main switch current sense input; connect to MOSFET drain for RDS-ON sensing or to source-side sense resistor for cycle-by-cycle current limit at 245mV threshold."+      },+      {+        "number": "14",+        "name": "RPD",+        "type": "output",+        "description": "Resistor pulldown open-drain output; connects bottom of external resistor dividers to ground for zero-current shutdown with 145Ω pulldown resistance typical."+      },+      {+        "number": "15",+        "name": "HSP",+        "type": "input",+        "description": "LED current sense positive input; connect through series resistor to high side of LED string sense resistor for high-side differential current sensing."+      },+      {+        "number": "16",+        "name": "HSN",+        "type": "input",+        "description": "LED current sense negative input; connect through series resistor to low side of LED string sense resistor for high-side differential current sensing."+      },+      {+        "number": "17",+        "name": "DAP",+        "type": "power_in",+        "description": "Die attach pad thermal connection on bottom of IC; star ground connecting AGND and PGND for low-impedance power/ground return."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: AGND description in datasheet mentions TIMR for ground return, but TIMR pin is not present on the 16; DAP (pin 17) is the thermal pad and may not be explicitly printed as a pin number on the physical pa"+        ],+        "pages_sent": 79,+        "cost_usd": 0.721,+        "at": "2026-09-27T11:00:29"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm3421",+        "pages": 79,+        "sha256": "37e8739d38bb6fd4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file