← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "VCC", "type": "power_out",- "description": "Internal regulator output pin. Provides ~5.4 V self-bias for internal gate drive and control circuits. Must be bypassed to ground with a ceramic capacitor of at least 1 \u00b5F. External loading is limited by device thermal considerations."+ "description": "Internal regulator output pin. Provides ~5.4 V self-bias for internal gate drive and control circuits. Must be bypassed to ground with a ceramic capacitor of at least 1 µF. External loading is limited by device thermal considerations." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "IADJ", "type": "input",- "description": "Average output current adjustment pin. Connect resistor R_IADJ from this pin to ground to program the average LED current (nominal V_IADJ \u2248 1.255 V; ~1 A with R_IADJ = 3.125 k\u03a9). Also supports analog dimming."+ "description": "Average output current adjustment pin. Connect resistor R_IADJ from this pin to ground to program the average LED current (nominal V_IADJ ≈ 1.255 V; ~1 A with R_IADJ = 3.125 kΩ). Also supports analog dimming." }, { "number": "4",@@ -56,19 +56,19 @@ "number": "5", "name": "FS", "type": "input",- "description": "Switching frequency setting pin. Connect resistor R_FS from this pin to ground to program switching frequency in the 250 kHz to 1000 kHz range (\u2248500 kHz with R_FS = 40 k\u03a9)."+ "description": "Switching frequency setting pin. Connect resistor R_FS from this pin to ground to program switching frequency in the 250 kHz to 1000 kHz range (≈500 kHz with R_FS = 40 kΩ)." }, { "number": "6", "name": "DIM", "type": "input",- "description": "PWM dimming control pin. Apply a logic-level PWM signal to control LED string brightness. Threshold \u2248 1.0-1.2 V with ~100 mV hysteresis; absolute max 6 V."+ "description": "PWM dimming control pin. Apply a logic-level PWM signal to control LED string brightness. Threshold ≈ 1.0-1.2 V with ~100 mV hysteresis; absolute max 6 V." }, { "number": "7", "name": "LX", "type": "output",- "description": "Drain of internal low-side N-channel MOSFET switch. Connect to the output inductor and to the anode of the Schottky freewheel diode. R_DS(on) \u2248 1.8 \u03a9; withstands V_IN (up to 65 V for HV)."+ "description": "Drain of internal low-side N-channel MOSFET switch. Connect to the output inductor and to the anode of the Schottky freewheel diode. R_DS(on) ≈ 1.8 Ω; withstands V_IN (up to 65 V for HV)." }, { "number": "8",@@ -158,5 +158,8 @@ "docs/lm3414hvmrx-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }