← Commit history

Initial commit: component/lm3404hvmax

Ray ·f937bef537 ·
2 files changed +85
README.mdadded+51
@@ -0,0 +1,51 @@+# LM3404HVMAX++**Texas Instruments** · LED Drivers · SOIC-8++LM3404HVMAX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switch pin - drain of the internal high-side N-channel MOSFET. Connect to the output inductor and to the anode of the Schottky recirculating diode. Absolute maximum SW-to-GND is -1.5 V to 76 V on the HV part. |+| 2 | BOOT | passive | MOSFET drive bootstrap pin. Connect a 10-nF ceramic capacitor from BOOT to SW to develop the gate-drive supply for the internal high-side switch. BST undervoltage lockout is ~3 V (BST-SW). |+| 3 | DIM | input | PWM dimming / enable input. Drive with a logic-level PWM signal (VIH ≥ 2.2 V, VIL ≤ 0.8 V) to gate the power MOSFET on/off and reduce average LED current. Includes an ~80 µA internal pull-up so the part runs at full duty if left open. |+| 4 | GND | power_in | Device ground. Connect to system ground and to the ground return of the input, VCC bypass, and current-sense resistor. |+| 5 | CS | input | Current-sense feedback pin. Set the LED current by connecting a sense resistor from CS to GND; the regulator turns the switch on when V(CS) falls below the 200 mV (typ) reference and turns off when V(CS) exceeds the 300 mV overvoltage threshold. |+| 6 | RON | input | On-time control pin. A resistor from RON to VIN programs the regulator's controlled on-time (hysteretic constant-off-time control). Also acts as a shutdown input - pulling RON below ~0.7 V places the device in low-power shutdown. |+| 7 | VCC | power_out | Output of the internal 7 V (typ, 6.4-7.4 V) linear regulator that supplies the gate driver and control circuits. Bypass to GND with a minimum 0.1 µF X5R/X7R ceramic capacitor. Do not load externally. |+| 8 | VIN | power_in | Input supply pin. Nominal operating range is 6 V to 75 V on the LM3404HV (6 V to 42 V on the LM3404). Bypass locally with a low-ESR ceramic input capacitor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | LED Drivers |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `LM3404HVMAX`+- `LM3404HVMAXMR`+- `LM3404HVMAXMRX`++## CAD (KiCad official)++- Symbol: `LM3404HVMAX`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm3404hv) (47 pp, sha256 `c30b6b258c57c07a`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3404hvmax-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lm3404hvmax",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "lm3404hvmax"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm3404hvmax.kicad_sym",+    "lm3404hvmax.kicad_mod",+    "lm3404hvmax.glb",+    "lm3404hvmax.step",+    "lm3404hvmax.lbr",+    "docs/hero.png",+    "docs/lm3404hvmax-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file