← Commit history

lm3404hvmax: factory component page (tier=lcsc)

Ray ·f6da749aaf · ·parent 078fd04
1 file changed +130−8
page.json+130−8
@@ -1,13 +1,140 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lm3404hvmax",+  "title": "LM3404HVMAX",+  "brief": "Texas Instruments LED Drivers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments LED Drivers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "led drivers",     "lm3404hvmax"   ],+  "component": {+    "mpn": "LM3404HVMAX",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm3404hv",+    "parts": {+      "symbol": "lm3404hvmax.kicad_sym",+      "footprint": "lm3404hvmax.kicad_mod",+      "model_3d": "lm3404hvmax.glb",+      "model_3d_step": "lm3404hvmax.step",+      "lbr": "lm3404hvmax.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Switch pin - drain of the internal high-side N-channel MOSFET. Connect to the output inductor and to the anode of the Schottky recirculating diode. Absolute maximum SW-to-GND is -1.5 V to 76 V on the HV part."+      },+      {+        "number": "2",+        "name": "BOOT",+        "type": "passive",+        "description": "MOSFET drive bootstrap pin. Connect a 10-nF ceramic capacitor from BOOT to SW to develop the gate-drive supply for the internal high-side switch. BST undervoltage lockout is ~3 V (BST-SW)."+      },+      {+        "number": "3",+        "name": "DIM",+        "type": "input",+        "description": "PWM dimming / enable input. Drive with a logic-level PWM signal (VIH \u2265 2.2 V, VIL \u2264 0.8 V) to gate the power MOSFET on/off and reduce average LED current. Includes an ~80 \u00b5A internal pull-up so the part runs at full duty if left open."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground. Connect to system ground and to the ground return of the input, VCC bypass, and current-sense resistor."+      },+      {+        "number": "5",+        "name": "CS",+        "type": "input",+        "description": "Current-sense feedback pin. Set the LED current by connecting a sense resistor from CS to GND; the regulator turns the switch on when V(CS) falls below the 200 mV (typ) reference and turns off when V(CS) exceeds the 300 mV overvoltage threshold."+      },+      {+        "number": "6",+        "name": "RON",+        "type": "input",+        "description": "On-time control pin. A resistor from RON to VIN programs the regulator's controlled on-time (hysteretic constant-off-time control). Also acts as a shutdown input - pulling RON below ~0.7 V places the device in low-power shutdown."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_out",+        "description": "Output of the internal 7 V (typ, 6.4-7.4 V) linear regulator that supplies the gate driver and control circuits. Bypass to GND with a minimum 0.1 \u00b5F X5R/X7R ceramic capacitor. Do not load externally."+      },+      {+        "number": "8",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply pin. Nominal operating range is 6 V to 75 V on the LM3404HV (6 V to 42 V on the LM3404). Bypass locally with a low-ESR ceramic input capacitor."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm3404hv",+        "pages": 47,+        "sha256": "c30b6b258c57c07a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "SOIC-8",+      "Category": "LED Drivers",+      "Pins": "8"+    }+  },+  "variants": [+    {+      "mpn": "LM3404HVMAX",+      "kind": "packaging"+    },+    {+      "mpn": "LM3404HVMAXMR",+      "kind": "packaging"+    },+    {+      "mpn": "LM3404HVMAXMRX",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lm3404hvmax"+  ],+  "discovery_pitch": "LM3404HVMAX (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +152,5 @@     "docs/lm3404hvmax-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file