← Commit history

Initial commit: component/lm3402mmx

Ray ·d6fe6c0f31 ·
2 files changed +83
README.mdadded+49
@@ -0,0 +1,49 @@+# LM3402MMX++**Texas Instruments** · LED Drivers · VSSOP-8-0.65mm++LM3402MMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switch node. Drain of the internal high-side N-channel MOSFET; connect to the output inductor and the cathode of the recirculating Schottky diode. Swings between VIN and about -1 V during switching. |+| 2 | BOOT | passive | High-side MOSFET gate-drive bootstrap pin. Connect a 10-nF ceramic capacitor from BOOT to SW to develop the boosted gate-drive rail. BOOT-to-SW rating is 14 V max. |+| 3 | DIM | input | PWM dimming / enable input. Logic-level input (VIH >= 2.2 V, VIL <= 0.8 V) that gates the power MOSFET to modulate average LED current or place the part in low-power shutdown. Has an internal ~75 uA pull-up so the pin defaults high. |+| 4 | GND | power_in | Device ground. Connect directly to the system ground plane and to the return of CIN, CF, and RSNS. |+| 5 | CS | input | LED current-sense feedback input. Regulated to VREF-REG = 200 mV (typical) above GND; sets LED current via RSNS from CS to GND (ILED = 0.2 V / RSNS). CS above ~300 mV triggers the over-voltage / open-LED comparator that turns SW off. |+| 6 | RON | input | ON-time programming pin. A resistor from RON to VIN sets the controlled switch ON-time and thus the switching frequency of the hysteretic loop. Pulling RON below the shutdown threshold (~0.7 V) also forces the part into low-power shutdown. |+| 7 | VCC | power_out | Output of the internal 7-V linear regulator that supplies the gate-drive and control circuits. Bypass to GND with a >= 0.1 uF X5R/X7R ceramic capacitor. Not intended to source external loads (current limit ~16 mA). |+| 8 | VIN | power_in | Input supply pin. 6 V to 42 V operating range on the LM3402 (6 V to 75 V on the LM3402HV). Decouple locally to GND with CIN. Absolute-maximum 45 V (LM3402) / 76 V (HV). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8-0.65mm |+| Category | LED-drv |+| Pins | 8 |++## Ordering variants++- `LM3402MMX`+- `LM3402MMXMR`+- `LM3402MMXMRX`++## CAD (KiCad official)++- Symbol: `LM3402MMX`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](docs/lm3402mmx-datasheet.pdf) (42 pp, sha256 `a2d1eed98007c56f`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm3402mmx-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lm3402mmx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led-drv",+    "lm3402mmx"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm3402mmx.kicad_sym",+    "lm3402mmx.kicad_mod",+    "lm3402mmx.glb",+    "lm3402mmx.step",+    "lm3402mmx.lbr",+    "docs/hero.png",+    "docs/lm3402mmx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file