← Commit history

lm3402mmx: factory component page (tier=lcsc)

Ray ·9701b26083 · ·parent f961a7a
1 file changed +116−8
page.json+116−8
@@ -1,13 +1,126 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lm3402mmx",+  "title": "LM3402MMX",+  "brief": "Texas Instruments LED Drivers, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments LED Drivers, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "led-drv",     "lm3402mmx"   ],+  "component": {+    "mpn": "LM3402MMX",+    "manufacturer": "Texas Instruments",+    "package": "VSSOP-8-0.65mm",+    "pin_count": 8,+    "category": "LED-drv",+    "subcategory": "LED Drivers",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2303011130_Texas-Instruments-LM3402MMX-NOPB_C2678958.pdf",+    "parts": {+      "symbol": "lm3402mmx.kicad_sym",+      "footprint": "lm3402mmx.kicad_mod",+      "model_3d": "lm3402mmx.glb",+      "model_3d_step": "lm3402mmx.step",+      "lbr": "lm3402mmx.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Switch node. Drain of the internal high-side N-channel MOSFET; connect to the output inductor and the cathode of the recirculating Schottky diode. Swings between VIN and about -1 V during switching."+      },+      {+        "number": "2",+        "name": "BOOT",+        "type": "passive",+        "description": "High-side MOSFET gate-drive bootstrap pin. Connect a 10-nF ceramic capacitor from BOOT to SW to develop the boosted gate-drive rail. BOOT-to-SW rating is 14 V max."+      },+      {+        "number": "3",+        "name": "DIM",+        "type": "input",+        "description": "PWM dimming / enable input. Logic-level input (VIH >= 2.2 V, VIL <= 0.8 V) that gates the power MOSFET to modulate average LED current or place the part in low-power shutdown. Has an internal ~75 uA pull-up so the pin defaults high."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground. Connect directly to the system ground plane and to the return of CIN, CF, and RSNS."+      },+      {+        "number": "5",+        "name": "CS",+        "type": "input",+        "description": "LED current-sense feedback input. Regulated to VREF-REG = 200 mV (typical) above GND; sets LED current via RSNS from CS to GND (ILED = 0.2 V / RSNS). CS above ~300 mV triggers the over-voltage / open-LED comparator that turns SW off."+      },+      {+        "number": "6",+        "name": "RON",+        "type": "input",+        "description": "ON-time programming pin. A resistor from RON to VIN sets the controlled switch ON-time and thus the switching frequency of the hysteretic loop. Pulling RON below the shutdown threshold (~0.7 V) also forces the part into low-power shutdown."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_out",+        "description": "Output of the internal 7-V linear regulator that supplies the gate-drive and control circuits. Bypass to GND with a >= 0.1 uF X5R/X7R ceramic capacitor. Not intended to source external loads (current limit ~16 mA)."+      },+      {+        "number": "8",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply pin. 6 V to 42 V operating range on the LM3402 (6 V to 75 V on the LM3402HV). Decouple locally to GND with CIN. Absolute-maximum 45 V (LM3402) / 76 V (HV)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2303011130_Texas-Instruments-LM3402MMX-NOPB_C2678958.pdf",+        "pages": 42,+        "sha256": "a2d1eed98007c56f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "VSSOP-8-0.65mm",+      "Category": "LED-drv",+      "Pins": "8"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lm3402mmx"+  ],+  "discovery_pitch": "LM3402MMX (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +138,5 @@     "docs/lm3402mmx-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file