← Commit history

lm339a-sr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·111ab7e1de · ·parent b255afe
2 files changed +94−14
package.json+52−12
@@ -67,7 +67,7 @@         "number": "1",         "name": "OUT_A",         "type": "output",-        "description": "Open-drain output of comparator A; pulls low when \u2212IN > +IN, VOL \u2264 400 mV at IOL = 4 mA (25 \u00b0C), leakage IOH \u2264 200 nA at VOH = 5 V."+        "description": "Open-drain output of comparator A; pulls low when −IN > +IN, VOL ≤ 400 mV at IOL = 4 mA (25 °C), leakage IOH ≤ 200 nA at VOH = 5 V."       },       {         "number": "2",@@ -79,13 +79,13 @@         "number": "3",         "name": "V+",         "type": "power_in",-        "description": "Positive power supply, 2.5 V to 36 V single-supply or \u00b11.25 V to \u00b118 V split-supply; bypass with 0.1 \u00b5F ceramic capacitor placed within 2 mm of pin."+        "description": "Positive power supply, 2.5 V to 36 V single-supply or ±1.25 V to ±18 V split-supply; bypass with 0.1 µF ceramic capacitor placed within 2 mm of pin."       },       {         "number": "4",         "name": "+IN_B",         "type": "input",-        "description": "Non-inverting input of comparator B; common-mode range 0 V to V+\u22121.5 V (25 \u00b0C), input bias current 4 nA typ, protected by 1 k\u03a9 series ESD diode network."+        "description": "Non-inverting input of comparator B; common-mode range 0 V to V+−1.5 V (25 °C), input bias current 4 nA typ, protected by 1 kΩ series ESD diode network."       },       {         "number": "5",@@ -97,19 +97,19 @@         "number": "6",         "name": "-IN_A",         "type": "input",-        "description": "Inverting input of comparator A; common-mode range 0 V to V+\u22121.5 V (25 \u00b0C), input bias current 4 nA typ."+        "description": "Inverting input of comparator A; common-mode range 0 V to V+−1.5 V (25 °C), input bias current 4 nA typ."       },       {         "number": "7",         "name": "+IN_A",         "type": "input",-        "description": "Non-inverting input of comparator A; same voltage range and bias current as \u2212IN_A."+        "description": "Non-inverting input of comparator A; same voltage range and bias current as −IN_A."       },       {         "number": "8",         "name": "+IN_C",         "type": "input",-        "description": "Non-inverting input of comparator C; common-mode range 0 V to V+\u22121.5 V (25 \u00b0C), input bias current 4 nA typ."+        "description": "Non-inverting input of comparator C; common-mode range 0 V to V+−1.5 V (25 °C), input bias current 4 nA typ."       },       {         "number": "9",@@ -121,25 +121,25 @@         "number": "10",         "name": "-IN_D",         "type": "input",-        "description": "Inverting input of comparator D; common-mode range 0 V to V+\u22121.5 V (25 \u00b0C), input bias current 4 nA typ."+        "description": "Inverting input of comparator D; common-mode range 0 V to V+−1.5 V (25 °C), input bias current 4 nA typ."       },       {         "number": "11",         "name": "+IN_D",         "type": "input",-        "description": "Non-inverting input of comparator D; same voltage range and bias current as \u2212IN_D."+        "description": "Non-inverting input of comparator D; same voltage range and bias current as −IN_D."       },       {         "number": "12",         "name": "V-",         "type": "power_in",-        "description": "Negative power supply / GND; normally tied to ground, must maintain 2.5 V to 36 V between V+ and V\u2212; bypass with 0.1 \u00b5F if not at ground."+        "description": "Negative power supply / GND; normally tied to ground, must maintain 2.5 V to 36 V between V+ and V−; bypass with 0.1 µF if not at ground."       },       {         "number": "13",         "name": "OUT_D",         "type": "output",-        "description": "Open-drain output of comparator D; VOL \u2264 400 mV at IOL = 4 mA (25 \u00b0C), leakage IOH \u2264 200 nA at VOH = 5 V."+        "description": "Open-drain output of comparator D; VOL ≤ 400 mV at IOL = 4 mA (25 °C), leakage IOH ≤ 200 nA at VOH = 5 V."       },       {         "number": "14",@@ -167,6 +167,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm339a-sr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm339a-sr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "0eb6fff2e1710b7b87e6b879be25527d04eba3a3a7fbab25081c28d3085c94da",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -152,7 +152,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm339a-sr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm339a-sr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "0eb6fff2e1710b7b87e6b879be25527d04eba3a3a7fbab25081c28d3085c94da",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -199,4 +239,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}