← Commit history

lm336mx-5-0: factory component page (tier=mfr)

Ray ·205754a0b1 · ·parent 6cffeab
4 files changed +40−37
README.md+8−8
@@ -8,14 +8,14 @@ LM336MX-5.0 from Texas Instruments LM336MX 5 0 NOPB, in a SOIC-8. Pinout and pin  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | NC | unconnected | No internal connection. Leave floating or tie to a convenient node. |-| 2 | NC | unconnected | No internal connection. Leave floating or tie to a convenient node. |-| 3 | NC | unconnected | No internal connection. Leave floating or tie to a convenient node. |-| 4 | V- | passive | Anode / negative terminal of the shunt reference. Return current path - typically tied to ground when used as a positive reference. Reverse (shunt) current 600 µA to 10 mA; absolute-max reverse current 15 mA. |-| 5 | ADJ | input | Adjustment / trim terminal. Connect to a 10 kΩ potentiometer wiper to trim the reverse breakdown voltage over the ±1 V adjustment range or to null the temperature coefficient. May be left open when trim is not required. |-| 6 | NC | unconnected | No internal connection. Leave floating or tie to a convenient node. |-| 7 | NC | unconnected | No internal connection. Leave floating or tie to a convenient node. |-| 8 | V+ | passive | Cathode / positive terminal of the shunt reference. Biased through an external series resistor from the supply; regulates to 5.00 V nominal (4.8-5.2 V initial tolerance for LM336-5.0) at IR = 1 mA with 0.6 Ω typical dynamic impedance. |+| 1 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |+| 2 | V- | passive | Anode (negative) terminal of the shunt reference. Typically connected to ground in a shunt-reference configuration; internally tied to pin 4. Reverse breakdown 4.9-5.1 V at IR = 1 mA. |+| 3 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |+| 4 | V- | passive | Anode (negative) terminal of the shunt reference. Internally tied to pin 2; connect both to the same node (typically GND) for lowest inductance. |+| 5 | ADJ | input | Adjust terminal. Allows fine trimming of the 5.0V reference voltage (±1 V typical range per Figure 14) and of the temperature coefficient (per Figure 15) using an external potentiometer. May be left open if adjustment is not needed. |+| 6 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |+| 7 | NC | unconnected | No internal connection. Leave floating or tie to any convenient node. |+| 8 | V+ | passive | Cathode (positive) terminal of the shunt reference. In a typical shunt configuration a bias resistor from the supply feeds this pin so that 600 µA to 10 mA flows through the device, developing the 5.00 V reference across V+ to V-. |  ## Key specifications 
lm336mx-5-0.kicad_sym+2−2
@@ -12,8 +12,8 @@       (name "NC" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin no_connect line (at -17.78 0.00 0) (length 5.08)-      (name "NC" (effects (font (size 1.27 1.27))))+    (pin passive line (at -17.78 0.00 0) (length 5.08)+      (name "V-" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )     (pin no_connect line (at -17.78 -2.54 0) (length 5.08)
lm336mx-5-0.lbr+19−13
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Texas Instruments LM336MX 5 0 NOPB Voltage Reference, SOIC-8</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm">   <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="LM336MX-5.0">+  <description>Texas Instruments LM336MX 5 0 NOPB Voltage Reference, SOIC-8</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -93,18 +94,18 @@   <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">&gt;VALUE</text>   <pin name="NC" x="-17.78" y="2.54" length="middle" direction="io"/>-  <pin name="NC@2" x="-17.78" y="0" length="middle" direction="io"/>-  <pin name="NC@3" x="-17.78" y="-2.54" length="middle" direction="io"/>-  <pin name="V-" x="-17.78" y="-5.08" length="middle" direction="pas"/>+  <pin name="V-" x="-17.78" y="0" length="middle" direction="pas"/>+  <pin name="NC@2" x="-17.78" y="-2.54" length="middle" direction="io"/>+  <pin name="V-@2" x="-17.78" y="-5.08" length="middle" direction="pas"/>   <pin name="V+" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>-  <pin name="NC@4" x="17.78" y="0" length="middle" direction="io" rot="R180"/>-  <pin name="NC@5" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="NC@3" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="NC@4" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>   <pin name="ADJ" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="LM336MX-5.0" prefix="U">-  <description></description>+  <description>Texas Instruments LM336MX 5 0 NOPB Voltage Reference, SOIC-8</description>   <gates>     <gate name="G$1" symbol="LM336MX-5.0" x="0" y="0"/>   </gates>@@ -112,15 +113,20 @@     <device name="" package="SOIC-8_3.9x4.9mm_P1.27mm">       <connects>         <connect gate="G$1" pin="NC" pad="1"/>-        <connect gate="G$1" pin="NC@2" pad="2"/>-        <connect gate="G$1" pin="NC@3" pad="3"/>-        <connect gate="G$1" pin="V-" pad="4"/>+        <connect gate="G$1" pin="V-" pad="2"/>+        <connect gate="G$1" pin="NC@2" pad="3"/>+        <connect gate="G$1" pin="V-@2" pad="4"/>         <connect gate="G$1" pin="V+" pad="8"/>-        <connect gate="G$1" pin="NC@4" pad="7"/>-        <connect gate="G$1" pin="NC@5" pad="6"/>+        <connect gate="G$1" pin="NC@3" pad="7"/>+        <connect gate="G$1" pin="NC@4" pad="6"/>         <connect gate="G$1" pin="ADJ" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="LM336MX-5.0" constant="no"/>+          <attribute name="MANUFACTURER" value="Texas Instruments LM336MX 5 0 NOPB" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
page.json+11−14
@@ -32,49 +32,49 @@         "number": "1",         "name": "NC",         "type": "unconnected",-        "description": "No internal connection. Leave floating or tie to a convenient node."+        "description": "No internal connection. Leave floating or tie to any convenient node."       },       {         "number": "2",-        "name": "NC",-        "type": "unconnected",-        "description": "No internal connection. Leave floating or tie to a convenient node."+        "name": "V-",+        "type": "passive",+        "description": "Anode (negative) terminal of the shunt reference. Typically connected to ground in a shunt-reference configuration; internally tied to pin 4. Reverse breakdown 4.9-5.1 V at IR = 1 mA."       },       {         "number": "3",         "name": "NC",         "type": "unconnected",-        "description": "No internal connection. Leave floating or tie to a convenient node."+        "description": "No internal connection. Leave floating or tie to any convenient node."       },       {         "number": "4",         "name": "V-",         "type": "passive",-        "description": "Anode / negative terminal of the shunt reference. Return current path - typically tied to ground when used as a positive reference. Reverse (shunt) current 600 µA to 10 mA; absolute-max reverse current 15 mA."+        "description": "Anode (negative) terminal of the shunt reference. Internally tied to pin 2; connect both to the same node (typically GND) for lowest inductance."       },       {         "number": "5",         "name": "ADJ",         "type": "input",-        "description": "Adjustment / trim terminal. Connect to a 10 kΩ potentiometer wiper to trim the reverse breakdown voltage over the ±1 V adjustment range or to null the temperature coefficient. May be left open when trim is not required."+        "description": "Adjust terminal. Allows fine trimming of the 5.0V reference voltage (\u00b11 V typical range per Figure 14) and of the temperature coefficient (per Figure 15) using an external potentiometer. May be left open if adjustment is not needed."       },       {         "number": "6",         "name": "NC",         "type": "unconnected",-        "description": "No internal connection. Leave floating or tie to a convenient node."+        "description": "No internal connection. Leave floating or tie to any convenient node."       },       {         "number": "7",         "name": "NC",         "type": "unconnected",-        "description": "No internal connection. Leave floating or tie to a convenient node."+        "description": "No internal connection. Leave floating or tie to any convenient node."       },       {         "number": "8",         "name": "V+",         "type": "passive",-        "description": "Cathode / positive terminal of the shunt reference. Biased through an external series resistor from the supply; regulates to 5.00 V nominal (4.8-5.2 V initial tolerance for LM336-5.0) at IR = 1 mA with 0.6 Ω typical dynamic impedance."+        "description": "Cathode (positive) terminal of the shunt reference. In a typical shunt configuration a bias resistor from the supply feeds this pin so that 600 \u00b5A to 10 mA flows through the device, developing the 5.00 V reference across V+ to V-."       }     ],     "provenance": {@@ -138,8 +138,5 @@     "docs/lm336mx-5-0-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file