← Commit history

lm335z: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·2292ba0594 · ·parent 94d55de
2 files changed +86−6
package.json+44−4
@@ -53,13 +53,13 @@         "number": "1",         "name": "V+",         "type": "power_in",-        "description": "Positive terminal (anode) of temperature sensor; generates output voltage directly proportional to absolute temperature at 10mV/\u00b0K with forward bias current from 450\u00b5A to 5mA; typical output voltage 2.98V at 25\u00b0C and 1mA with dynamic impedance less than 1\u03a9."+        "description": "Positive terminal (anode) of temperature sensor; generates output voltage directly proportional to absolute temperature at 10mV/°K with forward bias current from 450µA to 5mA; typical output voltage 2.98V at 25°C and 1mA with dynamic impedance less than 1Ω."       },       {         "number": "2",         "name": "ADJ",         "type": "input",-        "description": "Adjustment terminal for external trim resistor network; enables single-point calibration to achieve temperature error less than 1\u00b0C across the full operating range."+        "description": "Adjustment terminal for external trim resistor network; enables single-point calibration to achieve temperature error less than 1°C across the full operating range."       },       {         "number": "3",@@ -100,6 +100,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm335z.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          4.83,+          3.745,+          9.8+        ],+        "zmin_mm": -2.5,+        "centre_offset_mm": 0.542,+        "footprint_binding": "identity",+        "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm335z-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          4.83,+          3.745,+          9.8+        ],+        "zmin_mm": -2.5,+        "centre_offset_mm": 0.542,+        "footprint_binding": "identity",+        "sha256": "ea519340e40d85a3fbe9c188875a95a0fb139e814c4f1dd24d9ca485fc3a0d56",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -85,7 +85,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm335z.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          4.83,+          3.745,+          9.8+        ],+        "zmin_mm": -2.5,+        "centre_offset_mm": 0.542,+        "footprint_binding": "identity",+        "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm335z-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          4.83,+          3.745,+          9.8+        ],+        "zmin_mm": -2.5,+        "centre_offset_mm": 0.542,+        "footprint_binding": "identity",+        "sha256": "ea519340e40d85a3fbe9c188875a95a0fb139e814c4f1dd24d9ca485fc3a0d56",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -133,4 +173,4 @@     "public": true   },   "updated_at": "2026-09-28T16:38:25.058Z"-}\ No newline at end of file+}