← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "VCC", "type": "power_out",- "description": "Internal LDO output supplying the FET gate drivers and internal bias. Nominally regulated to 5.95 V. Connect a 1.0 \u00b5F to 4.7 \u00b5F decoupling capacitor from this pin to ground."+ "description": "Internal LDO output supplying the FET gate drivers and internal bias. Nominally regulated to 5.95 V. Connect a 1.0 µF to 4.7 µF decoupling capacitor from this pin to ground." }, { "number": "2",@@ -62,7 +62,7 @@ "number": "6", "name": "SS", "type": "passive",- "description": "Soft-start capacitor node. An internal 7.7 \u00b5A current source charges an external capacitor from this pin to ground to program the output ramp rate at start-up."+ "description": "Soft-start capacitor node. An internal 7.7 µA current source charges an external capacitor from this pin to ground to program the output ramp rate at start-up." }, { "number": "7",@@ -74,7 +74,7 @@ "number": "8", "name": "ILIM", "type": "input",- "description": "Current-limit sense input. Monitors the low-side FET current and triggers current-limit operation when the inductor valley current exceeds the threshold set by R_LIM and the 85 \u00b5A (typ) I_LIM-TH sense current sourced from this pin."+ "description": "Current-limit sense input. Monitors the low-side FET current and triggers current-limit operation when the inductor valley current exceeds the threshold set by R_LIM and the 85 µA (typ) I_LIM-TH sense current sourced from this pin." }, { "number": "9",@@ -86,7 +86,7 @@ "number": "10", "name": "SW", "type": "power_in",- "description": "Switch node. Connection to the source of the high-side NMOS and drain of the low-side NMOS, and lower supply rail for the high-side gate driver. Boost capacitor (BST) is referenced to this pin. Abs max \u22123 V to 47 V."+ "description": "Switch node. Connection to the source of the high-side NMOS and drain of the low-side NMOS, and lower supply rail for the high-side gate driver. Boost capacitor (BST) is referenced to this pin. Abs max −3 V to 47 V." }, { "number": "11",@@ -98,7 +98,7 @@ "number": "12", "name": "BST", "type": "power_in",- "description": "Bootstrap capacitor connection. Connect a 0.33 \u00b5F to 0.47 \u00b5F capacitor from SW to this pin. An internal diode charges the cap during the high-side off-time. Do not connect to an external supply rail. Abs max BST-SW 7 V; BST-GND 52 V."+ "description": "Bootstrap capacitor connection. Connect a 0.33 µF to 0.47 µF capacitor from SW to this pin. An internal diode charges the cap during the high-side off-time. Do not connect to an external supply rail. Abs max BST-SW 7 V; BST-GND 52 V." }, { "number": "13",@@ -180,5 +180,8 @@ "docs/lm3150mhx-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }