← Commit history

lm2937imp-3-3: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·8dc23eb65b · ·parent 5d2275f
1 file changed +51−1
page.json+51−1
@@ -33,5 +33,55 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LM2937IMP-3.3",+    "manufacturer": "Texas Instruments LM2937IMP 3 3 NOPB",+    "package": "SOT-223",+    "pin_count": 4,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2937imp-3.3.pdf",+    "parts": {+      "symbol": "lm2937imp-3-3.kicad_sym",+      "footprint": "lm2937imp-3-3.kicad_mod",+      "model_3d": "lm2937imp-3-3-etched.glb",+      "model_3d_plain": "lm2937imp-3-3.glb",+      "model_3d_step": "lm2937imp-3-3-etched.step",+      "model_3d_step_plain": "lm2937imp-3-3.step",+      "lbr": "lm2937imp-3-3.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "INPUT",+        "type": "power_in",+        "description": "Unregulated voltage input. Operating range 4.75 V to 26 V continuous (60 V transient <=100 ms). A 0.1 µF bypass capacitor is required if the regulator is located more than 3 inches from the power-supply-filter capacitors."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. Internally connected to the tab (pin 4) on the SOT-223 (DCY) package."+      },+      {+        "number": "3",+        "name": "OUTPUT",+        "type": "power_out",+        "description": "Regulated 3.3-V output (5% tolerance over operating conditions), up to 400 mA in the SOT-223 package. Requires an output capacitor >=10 µF with ESR between 0.01 Ω and 3 Ω for stability (LM2937 is stable for any ESR <=5 Ω)."+      },+      {+        "number": "4",+        "name": "GND (TAB)",+        "type": "power_in",+        "description": "Thermal and ground tab. Internally connected to device pin 2 (GND). Connect the TAB to a large copper area to remove heat from the device; connect to GND or leave floating - do not connect to any potential other than GND."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}