← Commit history
Publish 0.2.0
11 files changed
+507−273
README.md+32−23@@ -1,39 +1,48 @@ # LM2937IMP-3.3 -**Texas Instruments LM2937IMP 3 3 NOPB** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223+**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223 -LM2937IMP-3.3 from Texas Instruments LM2937IMP 3 3 NOPB, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+LM2937IMP-3.3 from Texas Instruments, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD. ## Pinout | Pin | Name | Type | Function | |---|---|---|---|-| 1 | INPUT | power_in | Unregulated voltage input. Operating range 4.75 V to 26 V continuous (60 V transient <=100 ms). A 0.1 µF bypass capacitor is required if the regulator is located more than 3 inches from the power-supply-filter capacitors. |-| 2 | GND | power_in | Device ground reference. Internally connected to the tab (pin 4) on the SOT-223 (DCY) package. |-| 3 | OUTPUT | power_out | Regulated 3.3-V output (5% tolerance over operating conditions), up to 400 mA in the SOT-223 package. Requires an output capacitor >=10 µF with ESR between 0.01 Ω and 3 Ω for stability (LM2937 is stable for any ESR <=5 Ω). |-| 4 | GND (TAB) | power_in | Thermal and ground tab. Internally connected to device pin 2 (GND). Connect the TAB to a large copper area to remove heat from the device; connect to GND or leave floating - do not connect to any potential other than GND. |+| 1 | INPUT | power_in | Unregulated voltage input |+| 2 | GND | power_in | Ground. KiCad's SOT-223-3_TabPin2 joins the tab (TI pin 4, GND: 'The TAB is internally connected to device pin 2 (GND)') to this pad. |+| 3 | OUTPUT | power_out | Regulated voltage output. This pin requires an output capacitor to maintain stability. | ## Key specifications | Parameter | Value | |---|---|-| Manufacturer | Texas Instruments LM2937IMP 3 3 NOPB |+| Manufacturer | Texas Instruments | | Package | SOT-223 |-| Category | PMIC |-| Pins | 4 |--## Ordering variants--- `LM2937IMP-3.3/NOPB`-- `LM2937IMP-3.3LM2937IMPX-3.3/NOPB`-- `LM2937IMP-3.3`-- `LM2937IMP-3.3LM2937IMPX-3.3`-- `LM2937IMP-3.3LM2937ET-3.3/NOPB`-- `LM2937IMP-3.3LM2937ET-3.3`-- `LM2937IMP-3.3LM2937ES-3.3/NOPB`-- `LM2937IMP-3.3LM2937ESX-3.3/NOPB`-- `LM2937IMP-3.3LM2937ES-3.3`-- `LM2937IMP-3.3LM2937ESX-3.3`+| Category | Voltage Regulators - Linear, Low Drop Out (LDO) Regulators |+| Pins | 3 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Input voltage, continuous | VIN | | | 26 | V | Continuous | 4 |+| Input voltage, transient | VIN | | | 60 | V | Transient, t ≤ 100 ms | 4 |+| Maximum junction temperature | | | | 150 | °C | | 4 |+| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |+| Electrostatic discharge, human body model | V(ESD) | -2000 | | 2000 | V | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | 4 |+| Junction temperature (TJ) operating range | TJ | -40 | | 85 | °C | LM2937IMP (DCY) package | 4 |+| Input voltage (VIN) operating range | VIN | | | 26 | V | Minimum is VOUT + 1 V | 4 |+| Junction-to-ambient thermal resistance | RθJA | | 58.3 | | °C/W | DCY (4-pin) package, as printed in thermal information table | 4 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| contacts | copper | | is practical to the package. The ground connections for CIN and COUT should be back to the LM2937 ground pin using as wide, and as short, of a copper trace as is practical. | 18 | ## CAD (KiCad official) @@ -46,7 +55,7 @@ LM2937IMP-3.3 from Texas Instruments LM2937IMP 3 3 NOPB, in a SOT-223. Pinout an Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments LM2937IMP 3 3 NOPB datasheet](https://www.ti.com/lit/ds/symlink/lm2937imp-3.3.pdf) (None pp, sha256 `83a348b42419baea`, retrieved 2026-08-17, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2937.pdf) (35 pp, sha256 `de6b9175f075271f`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
docs/lm2937imp-3-3-datasheet.pdf⋯ 1 unchanged line ⋯
lm2937imp-3-3-hero.glbadded⋯ 1 unchanged line ⋯
lm2937imp-3-3-hero.overlay.jsonadded+168@@ -0,0 +1,168 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM2937IMP-3.3",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 4,+ "span_mm": 8.4,+ "dash_mm": 0.21,+ "gap_mm": 0.126,+ "pad_stroke_mm": 0.0504+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 5,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 3,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "board_underside": false,+ "electrical_pads_without_contact": [],+ "mounting_pads_left_out": [],+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.664,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.5,+ 3.5,+ -2.684,+ 2.684+ ],+ "pads_bbox_mm": [+ -4.15,+ 4.15,+ -3.05,+ 3.05+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lm2937imp-3-3-etched.glb",+ "glb_sha256": "58055c924c4610534439463d43529d05fc4de5c7e6fe35d784c532c6da2ae8a2",+ "footprint": "lm2937imp-3-3.kicad_mod",+ "footprint_sha256": "5f6cad94d6c821d01d360a4a09cca4b89e63ae0ce12c33d1dd0ba4e30e86c523",+ "pins": "page.json component.pins",+ "pins_sha256": "f786d53337660f1d4460b241372f2100c2d2b5a7d106493434cf616c834d6886"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "INPUT",+ "x": -4.3,+ "y": -2.3,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "GND",+ "x": -4.3,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "OUTPUT",+ "x": -4.3,+ "y": 2.3,+ "align": "right",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -3.15,+ -2.3+ ],+ "size_mm": [+ 2.0,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -3.15,+ 0.0+ ],+ "size_mm": [+ 2.0,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ 3.15,+ 0.0+ ],+ "size_mm": [+ 2.0,+ 3.8+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -3.15,+ 2.3+ ],+ "size_mm": [+ 2.0,+ 1.5+ ],+ "rot": 0.0+ }+ ]+}
lm2937imp-3-3.kicad_mod+6−40@@ -107,46 +107,6 @@ (layer "F.SilkS") (uuid "27420593-f422-495a-9e17-88a99bcd8a3d") )- (fp_line- (start -4.4 -3.6)- (end -4.4 3.6)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- (uuid "2d708b29-208a-4760-a2c5-6626e4d03d29")- )- (fp_line- (start -4.4 3.6)- (end 4.4 3.6)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- (uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270")- )- (fp_line- (start 4.4 -3.6)- (end -4.4 -3.6)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- (uuid "d963e7fb-b321-4298-bcd6-9650f5938938")- )- (fp_line- (start 4.4 3.6)- (end 4.4 -3.6)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- (uuid "18839f08-10e9-4a73-9312-8be172f09091")- ) (fp_line (start -1.85 -2.35) (end -1.85 3.35)@@ -248,4 +208,10 @@ (xyz 0 0 0) ) )+ (fp_poly+ (pts (xy -4.40 -3.30) (xy -2.10 -3.30) (xy -2.10 -3.60) (xy 2.10 -3.60) (xy 2.10 -2.15) (xy 4.40 -2.15) (xy 4.40 2.15) (xy 2.10 2.15) (xy 2.10 3.60) (xy -2.10 3.60) (xy -2.10 3.30) (xy -4.40 3.30))+ (stroke (width 0.05) (type solid))+ (fill no)+ (layer "F.CrtYd")+ ) )
lm2937imp-3-3.kicad_sym+1−5@@ -16,11 +16,7 @@ (name "GND" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at 17.78 0.00 180) (length 5.08)- (name "GND (TAB)" (effects (font (size 1.27 1.27))))- (number "4" (effects (font (size 1.27 1.27))))- )- (pin power_out line (at 17.78 -2.54 180) (length 5.08)+ (pin power_out line (at 17.78 0.00 180) (length 5.08) (name "OUTPUT" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))) )
lm2937imp-3-3.lbr+17−18@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>SOT-223-3_TabPin2 (symbol synthesized from footprint pads)</description>+<description></description> <packages> <package name="SOT-223-3_TabPin2"> <description>4 pads, 8.3 x 6.1 mm. module CMS SOT223 4 pins</description>@@ -78,31 +78,30 @@ </package> </packages> <symbols>-<symbol name="SOT-223-3_TabPin2">- <description>SOT-223-3_TabPin2 (symbol synthesized from footprint pads)</description>- <wire x1="-7.62" y1="3.81" x2="7.62" y2="3.81" width="0.254" layer="94"/>- <wire x1="7.62" y1="3.81" x2="7.62" y2="-3.81" width="0.254" layer="94"/>- <wire x1="7.62" y1="-3.81" x2="-7.62" y2="-3.81" width="0.254" layer="94"/>- <wire x1="-7.62" y1="-3.81" x2="-7.62" y2="3.81" width="0.254" layer="94"/>- <text x="0" y="6.35" size="1.27" layer="95" align="bottom-center">>NAME</text>- <text x="0" y="-6.35" size="1.27" layer="96" align="top-center">>VALUE</text>- <pin name="1" x="-12.7" y="2.54" length="short" direction="pas"/>- <pin name="2" x="-12.7" y="0" length="short" direction="pas"/>- <pin name="3" x="12.7" y="2.54" length="short" direction="pas" rot="R180"/>+<symbol name="LM2937IMP-3.3">+ <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+ <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+ <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="INPUT" x="-17.78" y="0" length="middle" direction="pwr"/>+ <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="OUTPUT" x="17.78" y="0" length="middle" direction="out" rot="R180"/> </symbol> </symbols> <devicesets>-<deviceset name="SOT-223-3_TabPin2" prefix="U">- <description>SOT-223-3_TabPin2 (symbol synthesized from footprint pads)</description>+<deviceset name="LM2937IMP-3.3" prefix="U">+ <description></description> <gates>- <gate name="G$1" symbol="SOT-223-3_TabPin2" x="0" y="0"/>+ <gate name="G$1" symbol="LM2937IMP-3.3" x="0" y="0"/> </gates> <devices> <device name="" package="SOT-223-3_TabPin2"> <connects>- <connect gate="G$1" pin="1" pad="1"/>- <connect gate="G$1" pin="2" pad="2 2@2"/>- <connect gate="G$1" pin="3" pad="3"/>+ <connect gate="G$1" pin="INPUT" pad="1"/>+ <connect gate="G$1" pin="GND" pad="2 2@2"/>+ <connect gate="G$1" pin="OUTPUT" pad="3"/> </connects> <technologies><technology name=""/></technologies> </device>
package.json+173−7@@ -1,12 +1,14 @@ { "slug": "lm2937imp-3-3",- "version": "0.1.0",+ "version": "0.2.0", "type": "component",- "description": "Texas Instruments LM2937IMP 3 3 NOPB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.", "tags": [ "component",- "pmic",- "lm2937imp-3.3"+ "voltage regulators - linear, low drop out (ldo) regulators",+ "lm2937imp-3.3",+ "factory-2.0.0",+ "extractor-text" ], "dependencies": {}, "hero": {@@ -24,6 +26,170 @@ "docs/hero.png", "docs/lm2937imp-3-3-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "lm2937imp-3-3-hero.glb",+ "lm2937imp-3-3-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM2937IMP-3.3",+ "manufacturer": "Texas Instruments",+ "package": "SOT-223",+ "pin_count": 3,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm2937.pdf",+ "parts": {+ "symbol": "lm2937imp-3-3.kicad_sym",+ "footprint": "lm2937imp-3-3.kicad_mod",+ "model_3d": "lm2937imp-3-3-hero.glb",+ "model_3d_plain": "lm2937imp-3-3.glb",+ "model_3d_step": "lm2937imp-3-3-etched.step",+ "model_3d_step_plain": "lm2937imp-3-3.step",+ "lbr": "lm2937imp-3-3.lbr"+ },+ "distributor_links": {+ "digikey": "LM2937IMP-3.3TR-ND",+ "mouser": "926-LM2937IMP-33"+ },+ "distributor_check": {+ "checked_at": "2026-11-17T11:34:51Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LM2937IMP-3.3TR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "926-LM2937IMP-33",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "INPUT",+ "type": "power_in",+ "description": "Unregulated voltage input"+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. KiCad's SOT-223-3_TabPin2 joins the tab (TI pin 4, GND: 'The TAB is internally connected to device pin 2 (GND)') to this pad."+ },+ {+ "number": "3",+ "name": "OUTPUT",+ "type": "power_out",+ "description": "Regulated voltage output. This pin requires an output capacitor to maintain stability."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lm2937.pdf",+ "pages": 35,+ "sha256": "de6b9175f075271f",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lm2937imp-3-3.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.0,+ 6.5,+ 1.7+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",+ "checked": "2026-11-17",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm2937imp-3-3-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.0,+ 6.5,+ 1.7+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "dfc96342fc01da5e0f5a085de91587810d8157074db44840851dc0c7bd82182b",+ "checked": "2026-11-17",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ],+ "package_dims": {+ "package_code": "DCY0004A",+ "source_page": 32,+ "D": {+ "nom_mm": 6.5,+ "range_mm": [+ 6.3,+ 6.7+ ]+ },+ "E1": {+ "nom_mm": 3.5,+ "range_mm": [+ 3.3,+ 3.7+ ]+ },+ "E": {+ "nom_mm": 7.0,+ "range_mm": [+ 6.7,+ 7.3+ ]+ },+ "e": {+ "nom_mm": 2.3,+ "range_mm": [+ null,+ null+ ]+ },+ "A": {+ "nom_mm": 1.8,+ "range_mm": [+ null,+ 1.8+ ]+ },+ "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+ "model_check": {+ "file": "lm2937imp-3-3.step",+ "verdict": "PASS",+ "reasons": [+ "height and body within the datasheet's package drawing"+ ],+ "by": "factory/package_fit.py"+ }+ }+ }+}
page.json+108−50@@ -1,12 +1,14 @@ { "slug": "lm2937imp-3-3",- "version": "0.1.0",+ "version": "0.2.0", "type": "component",- "description": "Texas Instruments LM2937IMP 3 3 NOPB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.", "tags": [ "component",- "pmic",- "lm2937imp-3.3"+ "voltage regulators - linear, low drop out (ldo) regulators",+ "lm2937imp-3.3",+ "factory-2.0.0",+ "extractor-text" ], "dependencies": {}, "hero": {@@ -25,80 +27,87 @@ "docs/lm2937imp-3-3-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "lm2937imp-3-3-etched.step"+ "lm2937imp-3-3-hero.glb",+ "lm2937imp-3-3-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray", "email": "[email protected]" }, "component": { "mpn": "LM2937IMP-3.3",- "manufacturer": "Texas Instruments LM2937IMP 3 3 NOPB",+ "manufacturer": "Texas Instruments", "package": "SOT-223",- "pin_count": 4,+ "pin_count": 3, "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",- "datasheet": "https://www.ti.com/lit/ds/symlink/lm2937imp-3.3.pdf",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm2937.pdf", "parts": { "symbol": "lm2937imp-3-3.kicad_sym", "footprint": "lm2937imp-3-3.kicad_mod",- "model_3d": "lm2937imp-3-3-etched.glb",+ "model_3d": "lm2937imp-3-3-hero.glb", "model_3d_plain": "lm2937imp-3-3.glb", "model_3d_step": "lm2937imp-3-3-etched.step", "model_3d_step_plain": "lm2937imp-3-3.step", "lbr": "lm2937imp-3-3.lbr" },+ "distributor_links": {+ "digikey": "LM2937IMP-3.3TR-ND",+ "mouser": "926-LM2937IMP-33"+ },+ "distributor_check": {+ "checked_at": "2026-11-17T11:34:51Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LM2937IMP-3.3TR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "926-LM2937IMP-33",+ "status": "found"+ }+ }, "pins": [ { "number": "1", "name": "INPUT", "type": "power_in",- "description": "Unregulated voltage input. Operating range 4.75 V to 26 V continuous (60 V transient <=100 ms). A 0.1 µF bypass capacitor is required if the regulator is located more than 3 inches from the power-supply-filter capacitors."+ "description": "Unregulated voltage input" }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Device ground reference. Internally connected to the tab (pin 4) on the SOT-223 (DCY) package."+ "description": "Ground. KiCad's SOT-223-3_TabPin2 joins the tab (TI pin 4, GND: 'The TAB is internally connected to device pin 2 (GND)') to this pad." }, { "number": "3", "name": "OUTPUT", "type": "power_out",- "description": "Regulated 3.3-V output (5% tolerance over operating conditions), up to 400 mA in the SOT-223 package. Requires an output capacitor >=10 µF with ESR between 0.01 Ω and 3 Ω for stability (LM2937 is stable for any ESR <=5 Ω)."- },- {- "number": "4",- "name": "GND (TAB)",- "type": "power_in",- "description": "Thermal and ground tab. Internally connected to device pin 2 (GND). Connect the TAB to a large copper area to remove heat from the device; connect to GND or leave floating - do not connect to any potential other than GND."+ "description": "Regulated voltage output. This pin requires an output capacitor to maintain stability." } ], "provenance": {- "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lm2937.pdf",+ "pages": 35,+ "sha256": "de6b9175f075271f",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ } }, "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html" },- "distributor_links": {- "digikey": "LM2937IMP-3.3TR-ND",- "mouser": "926-LM2937IMP-33"- },- "distributor_check": {- "checked_at": "2026-10-05T19:04:23Z",- "source": "Component Ocean /api/assign-pns + lcsc_map",- "digikey": {- "pn": "LM2937IMP-3.3TR-ND",- "status": "found"- },- "mouser": {- "pn": "926-LM2937IMP-33",- "status": "found"- }- }, "models_3d": [ { "file": "lm2937imp-3-3.step",@@ -108,15 +117,15 @@ "origin": "footprint origin = pad-pattern centre", "seat": "z = 0", "extents_mm": [- 7.0,+ 7, 6.5, 1.7 ],- "zmin_mm": -0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",- "checked": "2026-10-07",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -127,17 +136,66 @@ "origin": "footprint origin = pad-pattern centre", "seat": "z = 0", "extents_mm": [- 7.0,+ 7, 6.5, 1.7 ],- "zmin_mm": -0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "a8d7e78abb3b20174be013f9cfc7bccf5d68e1d56cac90adb8f6a7f54b03f9fe",- "checked": "2026-10-16",+ "sha256": "dfc96342fc01da5e0f5a085de91587810d8157074db44840851dc0c7bd82182b",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }- ]- }-}+ ],+ "package_dims": {+ "package_code": "DCY0004A",+ "source_page": 32,+ "D": {+ "nom_mm": 6.5,+ "range_mm": [+ 6.3,+ 6.7+ ]+ },+ "E1": {+ "nom_mm": 3.5,+ "range_mm": [+ 3.3,+ 3.7+ ]+ },+ "E": {+ "nom_mm": 7,+ "range_mm": [+ 6.7,+ 7.3+ ]+ },+ "e": {+ "nom_mm": 2.3,+ "range_mm": [+ null,+ null+ ]+ },+ "A": {+ "nom_mm": 1.8,+ "range_mm": [+ null,+ 1.8+ ]+ },+ "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+ "model_check": {+ "file": "lm2937imp-3-3.step",+ "verdict": "PASS",+ "reasons": [+ "height and body within the datasheet's package drawing"+ ],+ "by": "factory/package_fit.py"+ }+ }+ },+ "org": "adom"+}
viewers/footprint.html+1−65@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LM2937IMP-3-3 footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-4.800 -4.000 9.600 8.000' style='width:100%;height:100%'><line class='ly-silk' x1='-1.850' y1='-3.410' x2='1.910' y2='-3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-1.850' y1='3.410' x2='1.910' y2='3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='-3.410' x2='1.910' y2='-2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='3.410' x2='1.910' y2='2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-4.400' y1='-3.600' x2='-4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-4.400' y1='3.600' x2='4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='-3.600' x2='-4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='3.600' x2='4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-0.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-0.850' y1='-3.350' x2='1.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='1.850' y1='-3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-copper pad' data-num='1' data-name='INPUT' x='-4.150' y='-3.050' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='-2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='GND' x='-4.150' y='-0.750' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='0.000' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='2' data-name='GND' x='2.150' y='-1.900' width='2.000' height='3.800' rx='0.500' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.150' y='0.000' font-size='1.100' transform='rotate(-90 3.150 0.000)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='OUTPUT' x='-4.150' y='1.550' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/LM2937IMP-3-3", PINS=[{"desc":"","name":"INPUT","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"GND (TAB)","number":"4","type":""},{"desc":"","name":"OUTPUT","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+' '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){- var n=g.getAttribute('data-num');- g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});- g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});- g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){- function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}- apply(b.classList.contains('on'));- b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>lm2937imp-3-3</title>
viewers/symbol.html+1−65@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LM2937IMP-3-3 symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -200 1500 400' style='width:100%;height:100%'><rect x='-500.0' y='-150.0' width='1000.0' height='300.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='INPUT'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>INPUT</text><g class='pingroup' data-num='2' data-name='GND'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='4' data-name='GND (TAB)'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>GND (TAB)</text><g class='pingroup' data-num='3' data-name='OUTPUT'><line class='pinvis' x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>OUTPUT</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/LM2937IMP-3-3", PINS=[{"desc":"","name":"INPUT","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"GND (TAB)","number":"4","type":""},{"desc":"","name":"OUTPUT","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+' '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){- var n=g.getAttribute('data-num');- g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});- g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});- g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){- function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}- apply(b.classList.contains('on'));- b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>lm2937imp-3-3</title>