← Commit history
lm2936mx-5-0: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+75−1
page.json+75−1@@ -33,5 +33,79 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LM2936MX-5.0",+ "manufacturer": "Texas Instruments LM2936MX 5 0 NOPB",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm2936mx-5.0.pdf",+ "parts": {+ "symbol": "lm2936mx-5-0.kicad_sym",+ "footprint": "lm2936mx-5-0.kicad_mod",+ "model_3d": "lm2936mx-5-0-etched.glb",+ "model_3d_plain": "lm2936mx-5-0.glb",+ "model_3d_step": "lm2936mx-5-0-etched.step",+ "model_3d_step_plain": "lm2936mx-5-0.step",+ "lbr": "lm2936mx-5-0.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated 5-V output, 50-mA maximum. Requires a minimum output capacitor (typically 10 µF) with specific ESR on this pin to maintain loop stability. Locate the capacitor as close as possible to the OUT and GND pins."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the regulator. Pins 2, 3, 6 and 7 are all tied to internal ground on the LM2936M SOIC package and should all be connected to the board ground plane."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the regulator. Tie to board ground; also serves as part of the heat conduction path on the SOIC-8 package."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. May be left open or connected to GND. The LM2936M (non-BM) variant does not implement the shutdown function on this pin."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. May be left open or connected to GND. On the LM2936BM variant this pin is the SD (shutdown) input; on the standard LM2936M SOIC it is unused."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the regulator. Tie to board ground."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the regulator. Tie to board ground; also aids in heat-sinking on the SOIC-8 package."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "power_in",+ "description": "Unregulated input voltage, 5.5 V to 40 V operating range (survival −50 V to +60 V). A 100-nF ceramic bypass capacitor is recommended when the regulator is located more than 2 inches from the supply filter capacitor."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}