← Commit history
lm2901qdrq1: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+111−1
page.json+111−1@@ -33,5 +33,115 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LM2901QDRQ1",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-14",+ "pin_count": 14,+ "category": "Comparators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm2901qdrq1.pdf",+ "parts": {+ "symbol": "lm2901qdrq1.kicad_sym",+ "footprint": "lm2901qdrq1.kicad_mod",+ "model_3d": "lm2901qdrq1-etched.glb",+ "model_3d_plain": "lm2901qdrq1.glb",+ "model_3d_step": "lm2901qdrq1-etched.step",+ "model_3d_step_plain": "lm2901qdrq1.step",+ "lbr": "lm2901qdrq1.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "1OUT",+ "type": "output",+ "description": "Open-collector output of comparator 1. Requires an external pull-up resistor (typ. 5.1 kΩ) to VCC or a logic supply. Can be wire-AND'ed with other open-collector outputs. Max output current 20 mA (recommended ≤4 mA per comparator)."+ },+ {+ "number": "2",+ "name": "2OUT",+ "type": "output",+ "description": "Open-collector output of comparator 2. Requires external pull-up to VCC or logic supply; can be wire-AND'ed with other open-collector outputs. Recommended output current ≤4 mA."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply pin. Operating range 2-30 V for LM2901-Q1 (2-32 V for V/AV variants). Typical supply current 0.8 mA for all four comparators combined; absolute maximum 36 V."+ },+ {+ "number": "4",+ "name": "2IN-",+ "type": "input",+ "description": "Inverting (negative) input of comparator 2. Common-mode input range 0 V to VCC-1.5 V; input bias current typ. -25 nA. Differential input voltage rated to ±36 V."+ },+ {+ "number": "5",+ "name": "2IN+",+ "type": "input",+ "description": "Non-inverting (positive) input of comparator 2. Common-mode input range 0 V to VCC-1.5 V; input bias current typ. -25 nA. Differential input voltage rated to ±36 V."+ },+ {+ "number": "6",+ "name": "1IN-",+ "type": "input",+ "description": "Inverting (negative) input of comparator 1. Common-mode input range 0 V to VCC-1.5 V; input bias current typ. -25 nA."+ },+ {+ "number": "7",+ "name": "1IN+",+ "type": "input",+ "description": "Non-inverting (positive) input of comparator 1. Common-mode input range 0 V to VCC-1.5 V; input bias current typ. -25 nA."+ },+ {+ "number": "8",+ "name": "3IN-",+ "type": "input",+ "description": "Inverting (negative) input of comparator 3. Common-mode input range 0 V to VCC-1.5 V; input bias current typ. -25 nA."+ },+ {+ "number": "9",+ "name": "3IN+",+ "type": "input",+ "description": "Non-inverting (positive) input of comparator 3. Common-mode input range 0 V to VCC-1.5 V; input bias current typ. -25 nA."+ },+ {+ "number": "10",+ "name": "4IN-",+ "type": "input",+ "description": "Inverting (negative) input of comparator 4. Common-mode input range 0 V to VCC-1.5 V; input bias current typ. -25 nA."+ },+ {+ "number": "11",+ "name": "4IN+",+ "type": "input",+ "description": "Non-inverting (positive) input of comparator 4. Common-mode input range 0 V to VCC-1.5 V; input bias current typ. -25 nA."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference. All voltages (except differential) are referenced to this pin."+ },+ {+ "number": "13",+ "name": "4OUT",+ "type": "output",+ "description": "Open-collector output of comparator 4. Requires external pull-up to VCC or logic supply; can be wire-AND'ed with other open-collector outputs."+ },+ {+ "number": "14",+ "name": "3OUT",+ "type": "output",+ "description": "Open-collector output of comparator 3. Requires external pull-up to VCC or logic supply; can be wire-AND'ed with other open-collector outputs."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}