← Commit history
lm2901m: factory component page (tier=lcsc)
4 files changed
+71−74
README.md+15−21@@ -8,20 +8,20 @@ LM2901M from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OUT2 | output | Comparator 2 open-collector output. Sinks up to 16 mA (typ 6 mA) with VSAT of 130 mV typ / 400 mV max. Requires an external pull-up resistor to a positive rail. |-| 2 | OUT1 | output | Comparator 1 open-collector output. Sinks up to 16 mA with VSAT ≈ 130 mV typ. Requires an external pull-up resistor. |-| 3 | VCC | power_in | Positive supply. Single-supply operation 3-32 V (absolute max 36 V) or dual-supply ±1.5 to ±16 V. Quiescent current typ 0.8 mA (RL=∞). |-| 4 | IN1(-) | input | Comparator 1 inverting input. Input bias current typ 25 nA, offset current typ ±5 nA. Common-mode range 0 V to Vcc−1.5 V (25 °C). |-| 5 | IN1(+) | input | Comparator 1 non-inverting input. Same input specs as IN1(-); differential input voltage rated up to Vcc (absolute max 36 V). |-| 6 | IN2(-) | input | Comparator 2 inverting input. Input bias typ 25 nA; VICMR extends to ground for single-supply use. |-| 7 | IN2(+) | input | Comparator 2 non-inverting input. Input bias typ 25 nA; large-signal voltage gain typ 200 V/mV. |-| 8 | IN3(-) | input | Comparator 3 inverting input. Common-mode range 0 V to Vcc−1.5 V (25 °C). |-| 9 | IN3(+) | input | Comparator 3 non-inverting input. Input bias typ 25 nA. |-| 10 | IN4(-) | input | Comparator 4 inverting input. Input bias typ 25 nA; offset voltage typ ±2 mV, max ±5 mV at 25 °C. |-| 11 | IN4(+) | input | Comparator 4 non-inverting input. Common-mode range includes ground for single-supply operation. |-| 12 | GND | power_in | Ground / negative supply. Tie to 0 V for single-supply or to V− for split-supply operation. |-| 13 | OUT4 | output | Comparator 4 open-collector output. ISINK typ 16 mA; VSAT typ 130 mV. Needs external pull-up. |-| 14 | OUT3 | output | Comparator 3 open-collector output. Open-collector; leakage typ 0.1 nA, max 1 µA over temperature. |+| 1 | OUT2 | output | Open-collector output of comparator 2. Requires an external pull-up resistor to VCC (or another rail up to 36 V). Can sink ~16 mA typical. |+| 2 | OUT1 | output | Open-collector output of comparator 1. Requires an external pull-up resistor to VCC. |+| 3 | VCC | power_in | Positive supply pin. Single-supply range 2 V to 36 V, or ±1 V to ±18 V for split supplies. |+| 4 | IN1- | input | Inverting input of comparator 1. Common-mode range includes ground (V- to VCC-1.5 V). |+| 5 | IN1+ | input | Non-inverting input of comparator 1. Common-mode range includes ground. |+| 6 | IN2- | input | Inverting input of comparator 2. Common-mode range includes ground. |+| 7 | IN2+ | input | Non-inverting input of comparator 2. Common-mode range includes ground. |+| 8 | IN3+ | input | Non-inverting input of comparator 3. Common-mode range includes ground. |+| 9 | IN3- | input | Inverting input of comparator 3. Common-mode range includes ground. |+| 10 | IN4+ | input | Non-inverting input of comparator 4. Common-mode range includes ground. |+| 11 | IN4- | input | Inverting input of comparator 4. Common-mode range includes ground. |+| 12 | GND | power_in | Negative supply / ground pin. Connect to 0 V for single-supply operation, or V- for split-supply operation. |+| 13 | OUT4 | output | Open-collector output of comparator 4. Requires an external pull-up resistor to VCC. |+| 14 | OUT3 | output | Open-collector output of comparator 3. Requires an external pull-up resistor to VCC. | ## Key specifications @@ -34,13 +34,7 @@ LM2901M from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the ## Ordering variants -- `LM2901MN`-- `LM2901MM/TR`-- `LM2901MMT/TR`-- `LM2901MMS/TR`-- `LM2901MLQ/TR`-- `LM2901MRLQ/TR`-- `LM2901MULQ/TR`+- `LM2901MM` ## CAD (KiCad official)
lm2901m.kicad_sym+8−8@@ -21,19 +21,19 @@ (number "3" (effects (font (size 1.27 1.27)))) ) (pin input line (at -17.78 0.00 0) (length 5.08)- (name "IN1(-)" (effects (font (size 1.27 1.27))))+ (name "IN1-" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27)))) ) (pin input line (at -17.78 -2.54 0) (length 5.08)- (name "IN1(+)" (effects (font (size 1.27 1.27))))+ (name "IN1+" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27)))) ) (pin input line (at -17.78 -5.08 0) (length 5.08)- (name "IN2(-)" (effects (font (size 1.27 1.27))))+ (name "IN2-" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27)))) ) (pin input line (at -17.78 -7.62 0) (length 5.08)- (name "IN2(+)" (effects (font (size 1.27 1.27))))+ (name "IN2+" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27)))) ) (pin output line (at 17.78 7.62 180) (length 5.08)@@ -49,19 +49,19 @@ (number "12" (effects (font (size 1.27 1.27)))) ) (pin input line (at 17.78 0.00 180) (length 5.08)- (name "IN4(+)" (effects (font (size 1.27 1.27))))+ (name "IN4-" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27)))) ) (pin input line (at 17.78 -2.54 180) (length 5.08)- (name "IN4(-)" (effects (font (size 1.27 1.27))))+ (name "IN4+" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27)))) ) (pin input line (at 17.78 -5.08 180) (length 5.08)- (name "IN3(+)" (effects (font (size 1.27 1.27))))+ (name "IN3-" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27)))) ) (pin input line (at 17.78 -7.62 180) (length 5.08)- (name "IN3(-)" (effects (font (size 1.27 1.27))))+ (name "IN3+" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27)))) ) )
lm2901m.lbr+25−19@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>HGSEMI Comparators, SOP-14</description> <packages> <package name="SOIC-14_3.9x8.7mm_P1.27mm"> <description>SOIC-14, 3.9 x 8.7 mm, 1.27 mm pitch</description>@@ -92,6 +92,7 @@ </packages> <symbols> <symbol name="LM2901M">+ <description>HGSEMI Comparators, SOP-14</description> <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/> <wire x1="12.7" y1="10.16" x2="12.7" y2="-10.16" width="0.254" layer="94"/> <wire x1="12.7" y1="-10.16" x2="-12.7" y2="-10.16" width="0.254" layer="94"/>@@ -101,22 +102,22 @@ <pin name="OUT2" x="-17.78" y="7.62" length="middle" direction="out"/> <pin name="OUT1" x="-17.78" y="5.08" length="middle" direction="out"/> <pin name="VCC" x="-17.78" y="2.54" length="middle" direction="pwr"/>- <pin name="IN1_-" x="-17.78" y="0" length="middle" direction="in"/>- <pin name="IN1_+" x="-17.78" y="-2.54" length="middle" direction="in"/>- <pin name="IN2_-" x="-17.78" y="-5.08" length="middle" direction="in"/>- <pin name="IN2_+" x="-17.78" y="-7.62" length="middle" direction="in"/>+ <pin name="IN1-" x="-17.78" y="0" length="middle" direction="in"/>+ <pin name="IN1+" x="-17.78" y="-2.54" length="middle" direction="in"/>+ <pin name="IN2-" x="-17.78" y="-5.08" length="middle" direction="in"/>+ <pin name="IN2+" x="-17.78" y="-7.62" length="middle" direction="in"/> <pin name="OUT3" x="17.78" y="7.62" length="middle" direction="out" rot="R180"/> <pin name="OUT4" x="17.78" y="5.08" length="middle" direction="out" rot="R180"/> <pin name="GND" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>- <pin name="IN4_+" x="17.78" y="0" length="middle" direction="in" rot="R180"/>- <pin name="IN4_-" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>- <pin name="IN3_+" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>- <pin name="IN3_-" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+ <pin name="IN4-" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+ <pin name="IN4+" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+ <pin name="IN3-" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>+ <pin name="IN3+" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="LM2901M" prefix="U">- <description></description>+ <description>HGSEMI Comparators, SOP-14</description> <gates> <gate name="G$1" symbol="LM2901M" x="0" y="0"/> </gates>@@ -126,19 +127,24 @@ <connect gate="G$1" pin="OUT2" pad="1"/> <connect gate="G$1" pin="OUT1" pad="2"/> <connect gate="G$1" pin="VCC" pad="3"/>- <connect gate="G$1" pin="IN1_-" pad="4"/>- <connect gate="G$1" pin="IN1_+" pad="5"/>- <connect gate="G$1" pin="IN2_-" pad="6"/>- <connect gate="G$1" pin="IN2_+" pad="7"/>+ <connect gate="G$1" pin="IN1-" pad="4"/>+ <connect gate="G$1" pin="IN1+" pad="5"/>+ <connect gate="G$1" pin="IN2-" pad="6"/>+ <connect gate="G$1" pin="IN2+" pad="7"/> <connect gate="G$1" pin="OUT3" pad="14"/> <connect gate="G$1" pin="OUT4" pad="13"/> <connect gate="G$1" pin="GND" pad="12"/>- <connect gate="G$1" pin="IN4_+" pad="11"/>- <connect gate="G$1" pin="IN4_-" pad="10"/>- <connect gate="G$1" pin="IN3_+" pad="9"/>- <connect gate="G$1" pin="IN3_-" pad="8"/>+ <connect gate="G$1" pin="IN4-" pad="11"/>+ <connect gate="G$1" pin="IN4+" pad="10"/>+ <connect gate="G$1" pin="IN3-" pad="9"/>+ <connect gate="G$1" pin="IN3+" pad="8"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="LM2901M" constant="no"/>+ <attribute name="MANUFACTURER" value="HGSEMI" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+23−26@@ -32,85 +32,85 @@ "number": "1", "name": "OUT2", "type": "output",- "description": "Comparator 2 open-collector output. Sinks up to 16 mA (typ 6 mA) with VSAT of 130 mV typ / 400 mV max. Requires an external pull-up resistor to a positive rail."+ "description": "Open-collector output of comparator 2. Requires an external pull-up resistor to VCC (or another rail up to 36 V). Can sink ~16 mA typical." }, { "number": "2", "name": "OUT1", "type": "output",- "description": "Comparator 1 open-collector output. Sinks up to 16 mA with VSAT ≈ 130 mV typ. Requires an external pull-up resistor."+ "description": "Open-collector output of comparator 1. Requires an external pull-up resistor to VCC." }, { "number": "3", "name": "VCC", "type": "power_in",- "description": "Positive supply. Single-supply operation 3-32 V (absolute max 36 V) or dual-supply ±1.5 to ±16 V. Quiescent current typ 0.8 mA (RL=∞)."+ "description": "Positive supply pin. Single-supply range 2 V to 36 V, or \u00b11 V to \u00b118 V for split supplies." }, { "number": "4",- "name": "IN1(-)",+ "name": "IN1-", "type": "input",- "description": "Comparator 1 inverting input. Input bias current typ 25 nA, offset current typ ±5 nA. Common-mode range 0 V to Vcc−1.5 V (25 °C)."+ "description": "Inverting input of comparator 1. Common-mode range includes ground (V- to VCC-1.5 V)." }, { "number": "5",- "name": "IN1(+)",+ "name": "IN1+", "type": "input",- "description": "Comparator 1 non-inverting input. Same input specs as IN1(-); differential input voltage rated up to Vcc (absolute max 36 V)."+ "description": "Non-inverting input of comparator 1. Common-mode range includes ground." }, { "number": "6",- "name": "IN2(-)",+ "name": "IN2-", "type": "input",- "description": "Comparator 2 inverting input. Input bias typ 25 nA; VICMR extends to ground for single-supply use."+ "description": "Inverting input of comparator 2. Common-mode range includes ground." }, { "number": "7",- "name": "IN2(+)",+ "name": "IN2+", "type": "input",- "description": "Comparator 2 non-inverting input. Input bias typ 25 nA; large-signal voltage gain typ 200 V/mV."+ "description": "Non-inverting input of comparator 2. Common-mode range includes ground." }, { "number": "8",- "name": "IN3(-)",+ "name": "IN3+", "type": "input",- "description": "Comparator 3 inverting input. Common-mode range 0 V to Vcc−1.5 V (25 °C)."+ "description": "Non-inverting input of comparator 3. Common-mode range includes ground." }, { "number": "9",- "name": "IN3(+)",+ "name": "IN3-", "type": "input",- "description": "Comparator 3 non-inverting input. Input bias typ 25 nA."+ "description": "Inverting input of comparator 3. Common-mode range includes ground." }, { "number": "10",- "name": "IN4(-)",+ "name": "IN4+", "type": "input",- "description": "Comparator 4 inverting input. Input bias typ 25 nA; offset voltage typ ±2 mV, max ±5 mV at 25 °C."+ "description": "Non-inverting input of comparator 4. Common-mode range includes ground." }, { "number": "11",- "name": "IN4(+)",+ "name": "IN4-", "type": "input",- "description": "Comparator 4 non-inverting input. Common-mode range includes ground for single-supply operation."+ "description": "Inverting input of comparator 4. Common-mode range includes ground." }, { "number": "12", "name": "GND", "type": "power_in",- "description": "Ground / negative supply. Tie to 0 V for single-supply or to V− for split-supply operation."+ "description": "Negative supply / ground pin. Connect to 0 V for single-supply operation, or V- for split-supply operation." }, { "number": "13", "name": "OUT4", "type": "output",- "description": "Comparator 4 open-collector output. ISINK typ 16 mA; VSAT typ 130 mV. Needs external pull-up."+ "description": "Open-collector output of comparator 4. Requires an external pull-up resistor to VCC." }, { "number": "14", "name": "OUT3", "type": "output",- "description": "Comparator 3 open-collector output. Open-collector; leakage typ 0.1 nA, max 1 µA over temperature."+ "description": "Open-collector output of comparator 3. Requires an external pull-up resistor to VCC." } ], "provenance": {@@ -174,8 +174,5 @@ "docs/lm2901m-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }