component
LM2853MHX-1.2
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# LM2853MHX-1.2++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++LM2853MHX-1.2 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AVIN | power_in | Input voltage supply for control circuitry operating from 3V to 5.5V |+| 2 | EN | input | Enable control input, internally pulled up to AVIN voltage |+| 3 | SGND | power_in | Low noise ground for signal circuits |+| 4 | SS | input | Soft-start capacitor node, 1nF to 50nF capacitor range |+| 5 | NC | unconnected | No connect pin, must be tied to ground |+| 6 | PVIN | power_in | Input voltage supply for power FETs operating from 1.5V to 5.5V |+| 7 | PVIN | power_in | Input voltage supply for power FETs operating from 1.5V to 5.5V |+| 8 | SW | output | Switch node output to inductor and output filter capacitor |+| 9 | SW | output | Switch node output to inductor and output filter capacitor |+| 10 | PGND | power_in | Power ground, low impedance connection to ground plane |+| 11 | PGND | power_in | Power ground, low impedance connection to ground plane |+| 12 | NC | unconnected | No connect pin, must be tied to ground |+| 13 | NC | unconnected | No connect pin, must be tied to ground |+| 14 | SNS | input | Output voltage sense input for feedback control from 200kΩ divider network |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Power Supply Chip |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `LM2853MHX-1.2`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `lm2853mhx-1-2-etched.step` / `lm2853mhx-1-2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2853mhx-1-2.step` / `lm2853mhx-1-2.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm2853) (26 pp, sha256 `df92f91bdfe52be8`, retrieved 2026-09-26, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm2853mhx-1-2-datasheet.pdf)
page.jsonadded+202@@ -0,0 +1,202 @@+{+ "slug": "lm2853mhx-1-2",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "lm2853mhx-1.2",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm2853mhx-1-2.kicad_sym",+ "lm2853mhx-1-2.kicad_mod",+ "lm2853mhx-1-2.glb",+ "lm2853mhx-1-2.step",+ "lm2853mhx-1-2.lbr",+ "docs/hero.png",+ "docs/lm2853mhx-1-2-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM2853MHX-1.2",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-14-EP",+ "pin_count": 15,+ "category": "Power Supply Chip",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm2853",+ "parts": {+ "symbol": "lm2853mhx-1-2.kicad_sym",+ "footprint": "lm2853mhx-1-2.kicad_mod",+ "model_3d": "lm2853mhx-1-2-etched.glb",+ "model_3d_plain": "lm2853mhx-1-2.glb",+ "model_3d_step": "lm2853mhx-1-2-etched.step",+ "model_3d_step_plain": "lm2853mhx-1-2.step",+ "lbr": "lm2853mhx-1-2.lbr"+ },+ "distributor_links": {+ "lcsc": "C2072631",+ "digikey": "LM2853MHX-1.2-ND",+ "mouser": "926-LM2853MHX-12"+ },+ "distributor_check": {+ "checked_at": "2026-09-26T21:41:03Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LM2853MHX-1.2-ND",+ "status": "found",+ "lifecycle": "Obsolete"+ },+ "mouser": {+ "pn": "926-LM2853MHX-12",+ "status": "found",+ "lifecycle": "Obsolete"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "AVIN",+ "type": "power_in",+ "description": "Input voltage supply for control circuitry operating from 3V to 5.5V"+ },+ {+ "number": "2",+ "name": "EN",+ "type": "input",+ "description": "Enable control input, internally pulled up to AVIN voltage"+ },+ {+ "number": "3",+ "name": "SGND",+ "type": "power_in",+ "description": "Low noise ground for signal circuits"+ },+ {+ "number": "4",+ "name": "SS",+ "type": "input",+ "description": "Soft-start capacitor node, 1nF to 50nF capacitor range"+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect pin, must be tied to ground"+ },+ {+ "number": "6",+ "name": "PVIN",+ "type": "power_in",+ "description": "Input voltage supply for power FETs operating from 1.5V to 5.5V"+ },+ {+ "number": "7",+ "name": "PVIN",+ "type": "power_in",+ "description": "Input voltage supply for power FETs operating from 1.5V to 5.5V"+ },+ {+ "number": "8",+ "name": "SW",+ "type": "output",+ "description": "Switch node output to inductor and output filter capacitor"+ },+ {+ "number": "9",+ "name": "SW",+ "type": "output",+ "description": "Switch node output to inductor and output filter capacitor"+ },+ {+ "number": "10",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground, low impedance connection to ground plane"+ },+ {+ "number": "11",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground, low impedance connection to ground plane"+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect pin, must be tied to ground"+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect pin, must be tied to ground"+ },+ {+ "number": "14",+ "name": "SNS",+ "type": "input",+ "description": "Output voltage sense input for feedback control from 200kΩ divider network"+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 15 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 26,+ "cost_usd": 0.2309,+ "at": "2026-09-26T21:40:42"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm2853",+ "pages": 26,+ "sha256": "df92f91bdfe52be8",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}