← Commit history
README.mdadded+55@@ -0,0 +1,55 @@+# LM2852YMXAX-1.5++**Texas Instruments LM2852YMXAX 1 5 NOPB** · DC-DC Converters · HTSSOP-14-EP++LM2852YMXAX-1.5 from Texas Instruments LM2852YMXAX 1 5 NOPB, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AVIN | power_in | Chip bias / analog input supply. Powers the internal control logic and analog circuitry. Connect to the input voltage (2.85 V to 5.5 V) or a separate rail; filter close to the pin. |+| 2 | EN | input | Enable input. Drive low (to GND) to disable the regulator; drive high (to AVIN) or leave floating to enable it. Pin is internally pulled up. |+| 3 | SGND | power_in | Signal (analog) ground reference for the internal control circuitry. Tie to the PGND / ground plane at a single point near the device. |+| 4 | SS | passive | Soft-start pin. Connect a small capacitor (1 nF to 50 nF) to ground to program the startup ramp. Internal soft-start resistance is ~400 kΩ. |+| 5 | NC | unconnected | No connect. Must be tied to ground or left floating in the application. |+| 6 | PVIN | power_in | Power input to the internal high-side PFET switch (source connection). Bypass with a low-ESR ceramic capacitor (e.g. 22 µF) close to the pin. Must be tied together with pin 7. |+| 7 | PVIN | power_in | Power input to the internal high-side PFET switch (source connection). Must be tied together with pin 6 on the PCB. |+| 8 | SW | power_out | Switch node - drain of the internal high-side PFET and low-side NFET. Connect through the output inductor (e.g. 10 µH) to the load. Must be tied together with pin 9. |+| 9 | SW | power_out | Switch node. Must be tied together with pin 8 on the PCB. |+| 10 | PGND | power_in | Power ground - return for the low-side NFET switch current. Connect to a large ground plane; must be tied together with pin 11. |+| 11 | PGND | power_in | Power ground - return for the low-side NFET switch current. Must be tied together with pin 10. |+| 12 | NC | unconnected | No connect. Must be tied to ground or left floating in the application. |+| 13 | NC | unconnected | No connect. Must be tied to ground or left floating in the application. |+| 14 | SNS | input | Output voltage sense pin. Connect Kelvin-style to VOUT as close to the load as possible; internal sense resistance is ~400 kΩ. This is the regulation feedback point. |+| 15 | EP | power_in | Exposed thermal pad on the underside of the HTSSOP-14 (PowerPAD) package. Must be soldered to a large ground plane / thermal-pad copper for heat dissipation and connected to ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments LM2852YMXAX 1 5 NOPB |+| Package | HTSSOP-14-EP |+| Category | PMIC |+| Pins | 15 |++## Ordering variants++- `LM2852YMXAX-1.5`++## CAD (KiCad official)++- Symbol: `LM2852YMXAX-1.5`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments LM2852YMXAX 1 5 NOPB datasheet](https://www.ti.com/lit/ds/symlink/lm2852ymxax-1.5.pdf) (None pp, sha256 `284b53595f280275`, retrieved 2026-08-17, tier: manufacturer)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm2852ymxax-1-5-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lm2852ymxax-1-5",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LM2852YMXAX 1 5 NOPB DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lm2852ymxax-1.5"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm2852ymxax-1-5.kicad_sym",+ "lm2852ymxax-1-5.kicad_mod",+ "lm2852ymxax-1-5.glb",+ "lm2852ymxax-1-5.step",+ "lm2852ymxax-1-5.lbr",+ "docs/hero.png",+ "docs/lm2852ymxax-1-5-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}