← Commit history

Initial commit: component/lm2852ymxa-2-5

Ray ·b0a5b837d6 ·
2 files changed +238
README.mdadded+52
@@ -0,0 +1,52 @@+# LM2852YMXA-2.5++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++LM2852YMXA-2.5 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AVIN | power_in | Chip bias input pin providing power to the logic of the chip; connect to input voltage or separate rail. |+| 2 | EN | input | Enable pin; connect to ground to disable chip, or to AVIN or leave floating to enable; internally pulled up. |+| 3 | SGND | power_in | Signal ground. |+| 4 | SS | input | Soft-start pin; connect to small capacitor (1 nF to 50 nF range) to control startup transient. |+| 5 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |+| 6 | PVIN | power_in | Input supply pin connected to input voltage; this rail connects to source of internal power PFET. |+| 7 | PVIN | power_in | Input supply pin connected to input voltage; this rail connects to source of internal power PFET. |+| 8 | SW | output | Switch pin; connect to output inductor. |+| 9 | SW | output | Switch pin; connect to output inductor. |+| 10 | PGND | power_in | Power ground; connect to internal ground plane or other large ground plane. |+| 11 | PGND | power_in | Power ground; connect to internal ground plane or other large ground plane. |+| 12 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |+| 13 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |+| 14 | SNS | output | Output voltage sense pin; connect to output voltage as close to load as possible. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `LM2852YMXA-2.5`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `lm2852ymxa-2-5-etched.step` / `lm2852ymxa-2-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2852ymxa-2-5.step` / `lm2852ymxa-2-5.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm2852) (31 pp, sha256 `2216cf1c2aebddd4`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm2852ymxa-2-5-datasheet.pdf)
page.jsonadded+186
@@ -0,0 +1,186 @@+{+  "slug": "lm2852ymxa-2-5",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm2852ymxa-2.5",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm2852ymxa-2-5.kicad_sym",+    "lm2852ymxa-2-5.kicad_mod",+    "lm2852ymxa-2-5.glb",+    "lm2852ymxa-2-5.step",+    "lm2852ymxa-2-5.lbr",+    "docs/hero.png",+    "docs/lm2852ymxa-2-5-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM2852YMXA-2.5",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-14-EP",+    "pin_count": 15,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm2852",+    "parts": {+      "symbol": "lm2852ymxa-2-5.kicad_sym",+      "footprint": "lm2852ymxa-2-5.kicad_mod",+      "model_3d": "lm2852ymxa-2-5-etched.glb",+      "model_3d_plain": "lm2852ymxa-2-5.glb",+      "model_3d_step": "lm2852ymxa-2-5-etched.step",+      "model_3d_step_plain": "lm2852ymxa-2-5.step",+      "lbr": "lm2852ymxa-2-5.lbr"+    },+    "distributor_links": {+      "lcsc": "C2879382"+    },+    "pins": [+      {+        "number": "1",+        "name": "AVIN",+        "type": "power_in",+        "description": "Chip bias input pin providing power to the logic of the chip; connect to input voltage or separate rail."+      },+      {+        "number": "2",+        "name": "EN",+        "type": "input",+        "description": "Enable pin; connect to ground to disable chip, or to AVIN or leave floating to enable; internally pulled up."+      },+      {+        "number": "3",+        "name": "SGND",+        "type": "power_in",+        "description": "Signal ground."+      },+      {+        "number": "4",+        "name": "SS",+        "type": "input",+        "description": "Soft-start pin; connect to small capacitor (1 nF to 50 nF range) to control startup transient."+      },+      {+        "number": "5",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect; must be tied to ground or left floating in the application."+      },+      {+        "number": "6",+        "name": "PVIN",+        "type": "power_in",+        "description": "Input supply pin connected to input voltage; this rail connects to source of internal power PFET."+      },+      {+        "number": "7",+        "name": "PVIN",+        "type": "power_in",+        "description": "Input supply pin connected to input voltage; this rail connects to source of internal power PFET."+      },+      {+        "number": "8",+        "name": "SW",+        "type": "output",+        "description": "Switch pin; connect to output inductor."+      },+      {+        "number": "9",+        "name": "SW",+        "type": "output",+        "description": "Switch pin; connect to output inductor."+      },+      {+        "number": "10",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground; connect to internal ground plane or other large ground plane."+      },+      {+        "number": "11",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground; connect to internal ground plane or other large ground plane."+      },+      {+        "number": "12",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect; must be tied to ground or left floating in the application."+      },+      {+        "number": "13",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect; must be tied to ground or left floating in the application."+      },+      {+        "number": "14",+        "name": "SNS",+        "type": "output",+        "description": "Output voltage sense pin; connect to output voltage as close to load as possible."+      },+      {+        "number": "15",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed thermal pad listed in pin functions table without assigned PIN NO; datasheet specifies 'Expo",+          "exposed pad 15 added from the footprint"+        ],+        "pages_sent": 31,+        "cost_usd": 0.3445,+        "at": "2026-09-23T01:25:58"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm2852",+        "pages": 31,+        "sha256": "2216cf1c2aebddd4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 15,+        "described": 15,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file