← Commit history
page.json+12−9@@ -32,43 +32,43 @@ "number": "1", "name": "PFM", "type": "input",- "description": "PFM mode enable. Logic high (1) allows PFM operation for improved light-load efficiency; logic low (0) forces fixed-frequency PWM. Logic thresholds: VIL \u2264 0.4 V, VIH \u2265 1.2 V (referenced to VIN, max VIN + 0.3 V)."+ "description": "PFM mode enable. Logic high (1) allows PFM operation for improved light-load efficiency; logic low (0) forces fixed-frequency PWM. Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V (referenced to VIN, max VIN + 0.3 V)." }, { "number": "2", "name": "C1-", "type": "passive",- "description": "Flying capacitor negative terminal. Connect a 1 \u00b5F ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump."+ "description": "Flying capacitor negative terminal. Connect a 1 µF ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump." }, { "number": "3", "name": "C1+", "type": "passive",- "description": "Flying capacitor positive terminal. Connect a 1 \u00b5F ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump."+ "description": "Flying capacitor positive terminal. Connect a 1 µF ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump." }, { "number": "4", "name": "OUTDIS", "type": "input",- "description": "Output disconnect / discharge option. Logic high (1) enables active output discharge (~500 \u00b5A typical) during shutdown; logic low (0) leaves the output high-impedance without pull-down during shutdown. Logic thresholds: VIL \u2264 0.4 V, VIH \u2265 1.2 V."+ "description": "Output disconnect / discharge option. Logic high (1) enables active output discharge (~500 µA typical) during shutdown; logic low (0) leaves the output high-impedance without pull-down during shutdown. Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V." }, { "number": "5", "name": "EN", "type": "input",- "description": "Chip enable. Logic high (1) enables the converter; logic low (0) shuts the device down (ISD \u2248 0.7 \u00b5A). Logic thresholds: VIL \u2264 0.4 V, VIH \u2265 1.2 V (max VIN + 0.3 V)."+ "description": "Chip enable. Logic high (1) enables the converter; logic low (0) shuts the device down (ISD ≈ 0.7 µA). Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V (max VIN + 0.3 V)." }, { "number": "6", "name": "VOUT", "type": "power_out",- "description": "Charge-pump output. Regulated 5 V (4.8 V to 5.2 V) at up to 200 mA. Bypass to GND with a 2.2 \u00b5F ceramic capacitor. Input current limit ICL \u2248 600 mA."+ "description": "Charge-pump output. Regulated 5 V (4.8 V to 5.2 V) at up to 200 mA. Bypass to GND with a 2.2 µF ceramic capacitor. Input current limit ICL ≈ 600 mA." }, { "number": "7", "name": "VIN", "type": "power_in",- "description": "Input voltage supply, 2.7 V to 5.5 V (abs max 6 V). Bypass to GND with a 2.2 \u00b5F ceramic capacitor. UVLO rising \u2248 2.6 V, falling \u2248 2.4 V."+ "description": "Input voltage supply, 2.7 V to 5.5 V (abs max 6 V). Bypass to GND with a 2.2 µF ceramic capacitor. UVLO rising ≈ 2.6 V, falling ≈ 2.4 V." }, { "number": "8",@@ -80,7 +80,7 @@ "number": "9", "name": "GND", "type": "power_in",- "description": "Exposed thermal pad on the bottom of the WSON package. Must be connected to GND and to a copper pour for thermal performance (R\u03b8JC(bot) \u2248 12.8 \u00b0C/W)."+ "description": "Exposed thermal pad on the bottom of the WSON package. Must be connected to GND and to a copper pour for thermal performance (RθJC(bot) ≈ 12.8 °C/W)." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/lm2775dsgr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }