← Commit history
lm2675mx-5-0-tp: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LM2675MX-5.0-TP",+ "manufacturer": "TECH PUBLIC LM2675MX 5 0 TP",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "lm2675mx-5-0-tp.kicad_sym",+ "footprint": "lm2675mx-5-0-tp.kicad_mod",+ "model_3d": "lm2675mx-5-0-tp-etched.glb",+ "model_3d_plain": "lm2675mx-5-0-tp.glb",+ "model_3d_step": "lm2675mx-5-0-tp-etched.step",+ "model_3d_step_plain": "lm2675mx-5-0-tp.step",+ "lbr": "lm2675mx-5-0-tp.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Leave floating or tie as convenient for layout."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Leave floating or tie as convenient for layout."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Leave floating or tie as convenient for layout."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback input. Senses the regulated output voltage to complete the internal feedback loop. For the fixed 5.0 V version connect directly to the regulated 5 V output node."+ },+ {+ "number": "5",+ "name": "ON/OFF",+ "type": "input",+ "description": "Active-low shutdown input (TTL-compatible). Logic low enables the regulator; logic high shuts down the switching regulator and puts it into low-power standby (typ. 50 µA quiescent)."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Circuit ground reference for the IC and its external components."+ },+ {+ "number": "7",+ "name": "VIN",+ "type": "power_in",+ "description": "Positive input supply for the switching regulator, up to 40 V. Requires a low-ESR input bypass capacitor placed close to this pin to supply switching currents and suppress voltage transients."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "power_out",+ "description": "Internal power-switch output. Voltage at this node swings between (+VIN − VSAT) and approximately −0.5 V at 300 kHz. Connect to the external catch diode / inductor node. Keep the copper area on this net small to minimize EMI coupling."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}