component
LM26480SQ-AA
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+62@@ -0,0 +1,62 @@+# LM26480SQ-AA++**Texas Instruments** · DC-DC Converters · WQFN-24-EP(4x4)++LM26480SQ-AA from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VINLDO12 | power_in | Analog power supply for internal functions (VREF, BIAS, I2C, Logic) |+| 2 | SYNC | input | Frequency synchronization pin allowing external clock signal to synchronize PMIC internal oscillator; must be grounded when not used |+| 3 | nPOR | output | Power on reset pin for Buck1 and Buck2 with open drain logic output and 100-kΩ pullup resistor; pulled to ground when supply voltages not good |+| 4 | GND_SW1 | power_in | Buck1 NMOS power ground |+| 5 | SW1 | power_out | Buck1 switcher output pin |+| 6 | VIN1 | power_in | Power input for Buck1 from either DC source or battery |+| 7 | ENSW1 | input | Enable pin for Buck1 switcher; logic HIGH enables Buck1; pin cannot be left floating |+| 8 | FB1 | input | Buck1 feedback input terminal |+| 9 | GND_C | power_in | Non-switching core ground pin |+| 10 | AVDD | power_in | Analog power supply for Buck converters |+| 11 | FB2 | input | Buck2 feedback input terminal |+| 12 | ENSW2 | input | Enable pin for Buck2 switcher; logic HIGH enables Buck2; pin cannot be left floating |+| 13 | VIN2 | power_in | Power input for Buck2 from either DC source or battery |+| 14 | SW2 | power_out | Buck2 switcher output pin |+| 15 | GND_SW2 | power_in | Buck2 NMOS power ground |+| 16 | ENLDO2 | input | Enable pin for LDO2; logic HIGH enables LDO2; pin cannot be left floating |+| 17 | ENLDO1 | input | Enable pin for LDO1; logic HIGH enables LDO1; pin cannot be left floating |+| 18 | GND_L | power_in | LDO ground pin |+| 19 | VINLDO1 | power_in | Power input for LDO1 from either DC source or battery |+| 20 | LDO1 | power_out | LDO1 output voltage |+| 21 | FBL1 | input | LDO1 feedback input terminal |+| 22 | FBL2 | input | LDO2 feedback input terminal |+| 23 | LDO2 | power_out | LDO2 output voltage |+| 24 | VINLDO2 | power_in | Power input for LDO2 from either DC source or battery |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-24-EP(4x4) |+| Category | Power Management (PMIC) |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `LM26480SQ-AA`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `lm26480sq-aa-etched.step` / `lm26480sq-aa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm26480sq-aa.step` / `lm26480sq-aa.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm26480) (44 pp, sha256 `9fa8e8bf5131003e`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm26480sq-aa-datasheet.pdf)
page.jsonadded+259@@ -0,0 +1,259 @@+{+ "slug": "lm26480sq-aa",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm26480sq-aa",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm26480sq-aa.kicad_sym",+ "lm26480sq-aa.kicad_mod",+ "lm26480sq-aa.glb",+ "lm26480sq-aa.step",+ "lm26480sq-aa.lbr",+ "docs/hero.png",+ "docs/lm26480sq-aa-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM26480SQ-AA",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm26480",+ "parts": {+ "symbol": "lm26480sq-aa.kicad_sym",+ "footprint": "lm26480sq-aa.kicad_mod",+ "model_3d": "lm26480sq-aa-etched.glb",+ "model_3d_plain": "lm26480sq-aa.glb",+ "model_3d_step": "lm26480sq-aa-etched.step",+ "model_3d_step_plain": "lm26480sq-aa.step",+ "lbr": "lm26480sq-aa.lbr"+ },+ "distributor_links": {+ "lcsc": "C131997"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T16:01:04Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VINLDO12",+ "type": "power_in",+ "description": "Analog power supply for internal functions (VREF, BIAS, I2C, Logic)"+ },+ {+ "number": "2",+ "name": "SYNC",+ "type": "input",+ "description": "Frequency synchronization pin allowing external clock signal to synchronize PMIC internal oscillator; must be grounded when not used"+ },+ {+ "number": "3",+ "name": "nPOR",+ "type": "output",+ "description": "Power on reset pin for Buck1 and Buck2 with open drain logic output and 100-kΩ pullup resistor; pulled to ground when supply voltages not good"+ },+ {+ "number": "4",+ "name": "GND_SW1",+ "type": "power_in",+ "description": "Buck1 NMOS power ground"+ },+ {+ "number": "5",+ "name": "SW1",+ "type": "power_out",+ "description": "Buck1 switcher output pin"+ },+ {+ "number": "6",+ "name": "VIN1",+ "type": "power_in",+ "description": "Power input for Buck1 from either DC source or battery"+ },+ {+ "number": "7",+ "name": "ENSW1",+ "type": "input",+ "description": "Enable pin for Buck1 switcher; logic HIGH enables Buck1; pin cannot be left floating"+ },+ {+ "number": "8",+ "name": "FB1",+ "type": "input",+ "description": "Buck1 feedback input terminal"+ },+ {+ "number": "9",+ "name": "GND_C",+ "type": "power_in",+ "description": "Non-switching core ground pin"+ },+ {+ "number": "10",+ "name": "AVDD",+ "type": "power_in",+ "description": "Analog power supply for Buck converters"+ },+ {+ "number": "11",+ "name": "FB2",+ "type": "input",+ "description": "Buck2 feedback input terminal"+ },+ {+ "number": "12",+ "name": "ENSW2",+ "type": "input",+ "description": "Enable pin for Buck2 switcher; logic HIGH enables Buck2; pin cannot be left floating"+ },+ {+ "number": "13",+ "name": "VIN2",+ "type": "power_in",+ "description": "Power input for Buck2 from either DC source or battery"+ },+ {+ "number": "14",+ "name": "SW2",+ "type": "power_out",+ "description": "Buck2 switcher output pin"+ },+ {+ "number": "15",+ "name": "GND_SW2",+ "type": "power_in",+ "description": "Buck2 NMOS power ground"+ },+ {+ "number": "16",+ "name": "ENLDO2",+ "type": "input",+ "description": "Enable pin for LDO2; logic HIGH enables LDO2; pin cannot be left floating"+ },+ {+ "number": "17",+ "name": "ENLDO1",+ "type": "input",+ "description": "Enable pin for LDO1; logic HIGH enables LDO1; pin cannot be left floating"+ },+ {+ "number": "18",+ "name": "GND_L",+ "type": "power_in",+ "description": "LDO ground pin"+ },+ {+ "number": "19",+ "name": "VINLDO1",+ "type": "power_in",+ "description": "Power input for LDO1 from either DC source or battery"+ },+ {+ "number": "20",+ "name": "LDO1",+ "type": "power_out",+ "description": "LDO1 output voltage"+ },+ {+ "number": "21",+ "name": "FBL1",+ "type": "input",+ "description": "LDO1 feedback input terminal"+ },+ {+ "number": "22",+ "name": "FBL2",+ "type": "input",+ "description": "LDO2 feedback input terminal"+ },+ {+ "number": "23",+ "name": "LDO2",+ "type": "power_out",+ "description": "LDO2 output voltage"+ },+ {+ "number": "24",+ "name": "VINLDO2",+ "type": "power_in",+ "description": "Power input for LDO2 from either DC source or battery"+ },+ {+ "number": "25",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 3 designation: pin table shows 'NPOR' but description and standard active-low notation uses 'nPO; Pin 23 description: datasheet states 'LDO output' which is ambiguous between LDO1 and LDO2; context ",+ "exposed pad 25 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 9,+ "cost_usd": 0.1574,+ "at": "2026-10-01T16:00:49"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm26480",+ "pages": 44,+ "sha256": "9fa8e8bf5131003e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}