LM2596-5.0FW05ARHQ

@@ -134,6 +134,7 @@         <technology name="">           <attribute name="MPN" value="LM2596-5.0FW05ARHQ" constant="no"/>           <attribute name="MANUFACTURER" value="GR LM2596 5 0FW05ARHQ" constant="no"/>+          <attribute name="LCSC_PN" value="C46641091" constant="no"/>         </technology>       </technologies>     </device>

@@ -26,19 +26,21 @@       "model_3d_step": "lm2596-5-0fw05arhq.step",       "lbr": "lm2596-5-0fw05arhq.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C46641091"+    },     "pins": [       {         "number": "1",         "name": "VIN",         "type": "power_in",-        "description": "Positive input supply for the IC switching regulator. Operating range 4.5 V to 40 V (45 V absolute maximum). A suitable input bypass capacitor (e.g. 470 μF, 50 V) must be present at this pin to minimize voltage transients and supply the switching currents required by the regulator."+        "description": "Positive input supply for the IC switching regulator. Operating range 4.5 V to 40 V (45 V absolute maximum). A suitable input bypass capacitor (e.g. 470 \u03bcF, 50 V) must be present at this pin to minimize voltage transients and supply the switching currents required by the regulator."       },       {         "number": "2",         "name": "Output",         "type": "output",-        "description": "Internal power switch output (emitter of the 3 A internal NPN switch). The voltage at this pin switches between approximately (+VIN − VSAT, VSAT ≈ 1.5 V at 3 A) and approximately −0.5 V with a duty cycle of VOUT/VIN. Connect to the catch diode and inductor of the buck output stage; keep the PCB copper area on this node small to minimize EMI coupling."+        "description": "Internal power switch output (emitter of the 3 A internal NPN switch). The voltage at this pin switches between approximately (+VIN \u2212 VSAT, VSAT \u2248 1.5 V at 3 A) and approximately \u22120.5 V with a duty cycle of VOUT/VIN. Connect to the catch diode and inductor of the buck output stage; keep the PCB copper area on this node small to minimize EMI coupling."       },       {         "number": "3",@@ -50,13 +52,13 @@         "number": "4",         "name": "Feedback",         "type": "input",-        "description": "Senses the regulated output voltage to complete the internal feedback loop. On the fixed 5 V version this pin is tied directly to the regulated 5 V output through the application circuit (internal divider sets 5 V ±4% over line/load). Absolute maximum feedback pin voltage is −0.3 V to 25 V."+        "description": "Senses the regulated output voltage to complete the internal feedback loop. On the fixed 5 V version this pin is tied directly to the regulated 5 V output through the application circuit (internal divider sets 5 V \u00b14% over line/load). Absolute maximum feedback pin voltage is \u22120.3 V to 25 V."       },       {         "number": "5",         "name": "~{ON}/OFF",         "type": "input",-        "description": "Active-low TTL-compatible shutdown control. Pulling this pin below ~1 V (VIH threshold typ 1.3 V) turns the regulator on; pulling it above ~1.3 V (up to 25 V max) shuts the regulator down, dropping total input supply current to ~80 μA standby. Input current is ~10 μA at 2.5 V. If shutdown is not used, tie to GND or leave open (regulator will be ON)."+        "description": "Active-low TTL-compatible shutdown control. Pulling this pin below ~1 V (VIH threshold typ 1.3 V) turns the regulator on; pulling it above ~1.3 V (up to 25 V max) shuts the regulator down, dropping total input supply current to ~80 \u03bcA standby. Input current is ~10 \u03bcA at 2.5 V. If shutdown is not used, tie to GND or leave open (regulator will be ON)."       },       {         "number": "6",