← Commit history
lm2594hvmx-5-0: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+75−1
page.json+75−1@@ -33,5 +33,79 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LM2594HVMX-5.0",+ "manufacturer": "Texas Instruments LM2594HVMX 5 0 NOPB",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm2594hvmx-5.0.pdf",+ "parts": {+ "symbol": "lm2594hvmx-5-0.kicad_sym",+ "footprint": "lm2594hvmx-5-0.kicad_mod",+ "model_3d": "lm2594hvmx-5-0-etched.glb",+ "model_3d_plain": "lm2594hvmx-5-0.glb",+ "model_3d_step": "lm2594hvmx-5-0-etched.step",+ "model_3d_step_plain": "lm2594hvmx-5-0.step",+ "lbr": "lm2594hvmx-5-0.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Datasheet notes the pin must be soldered to the PCB for best heat transfer."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Datasheet notes the pin must be soldered to the PCB for best heat transfer."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Datasheet notes the pin must be soldered to the PCB for best heat transfer."+ },+ {+ "number": "4",+ "name": "Feedback",+ "type": "input",+ "description": "Senses the regulated output voltage to close the internal feedback loop. For fixed 5-V output versions, this pin is tied to the regulated 5-V output node. Absolute-maximum voltage range -0.3 V to 25 V."+ },+ {+ "number": "5",+ "name": "ON/OFF",+ "type": "input",+ "description": "TTL-level shutdown input. Pulling the pin below ~1.3 V enables the regulator; pulling it above 1.3 V (up to 25 V) shuts the regulator down, dropping input supply current to approximately 80 uA. If shutdown is unused, tie to GND or leave open (regulator ON)."+ },+ {+ "number": "6",+ "name": "Ground",+ "type": "power_in",+ "description": "Circuit ground / power return for the IC."+ },+ {+ "number": "7",+ "name": "+VIN",+ "type": "power_in",+ "description": "Positive input supply for the switching regulator. Recommended operating range 4.5 V to 60 V (HV version); absolute max 60 V. A local input bypass capacitor is required at this pin to minimize voltage transients and to supply the pulsed switching currents."+ },+ {+ "number": "8",+ "name": "Output",+ "type": "output",+ "description": "Internal power-switch output that drives the external inductor and catch diode. The pin swings between (+VIN - VSAT) and approximately -0.5 V at ~150 kHz with duty cycle VOUT/VIN. Keep the PCB copper area on this node small to minimize EMI coupling."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}