component
LM2575SX-5.0
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+6−3@@ -38,7 +38,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Input supply voltage pin; operating input range is 4.75V-40V for the LM2575-5.0 (Absolute Maximum Supply Voltage for LM1575/LM2575 is 45V); must be bypassed with at least a 47 \u00b5F electrolytic capacitor located close to the regulator."+ "description": "Input supply voltage pin; operating input range is 4.75V-40V for the LM2575-5.0 (Absolute Maximum Supply Voltage for LM1575/LM2575 is 45V); must be bypassed with at least a 47 µF electrolytic capacitor located close to the regulator." }, { "number": "2",@@ -62,7 +62,7 @@ "number": "5", "name": "ON/OFF", "type": "input",- "description": "TTL/CMOS-compatible shutdown control input; drive low (typically below 1.6V, VIL max spec) for normal operation and high (VIH, typically above 1.4V) to place the device in standby mode drawing a typical 50 \u00b5A (200 \u00b5A max) standby quiescent current; this pin can be pulled up to +VIN without a series resistor and must not be left open."+ "description": "TTL/CMOS-compatible shutdown control input; drive low (typically below 1.6V, VIL max spec) for normal operation and high (VIH, typically above 1.4V) to place the device in standby mode drawing a typical 50 µA (200 µA max) standby quiescent current; this pin can be pulled up to +VIN without a series resistor and must not be left open." }, { "number": "6",@@ -150,5 +150,8 @@ "docs/lm2575sx-5-0-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }