← Commit history

Publish 0.1.1

Ray ·4eaa935564 · ·parent fd2ff15
4 files changed +605−49
lm25576mhx-hero.glbadded
⋯ 1 unchanged line ⋯
lm25576mhx-hero.overlay.jsonadded+537
@@ -0,0 +1,537 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "LM25576MHX",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 21,+      "span_mm": 9.2,+      "dash_mm": 0.23,+      "gap_mm": 0.138,+      "pad_stroke_mm": 0.0552+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 3,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.58,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.205,+      3.205,+      -3.075,+      3.075+    ],+    "pads_bbox_mm": [+      -3.625,+      3.625,+      -3.125,+      3.125+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "lm25576mhx-etched.glb",+    "glb_sha256": "4ee57866959e0211a02eaf7b025f6a1659097e909194a6ee9d94c6c93bb6aed8",+    "footprint": "lm25576mhx.kicad_mod",+    "footprint_sha256": "67d5d3fffa56b501ab023130eba99e0ca4408b552c9ea891778c8a79f13b6163",+    "pins": "page.json component.pins",+    "pins_sha256": "34eacd15f2b513d94e65758d06591307ca5b5f4c8b78a206970eddba3099452b"+  },+  "generator": "adom-wiki 1.8.25 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "VCC",+      "x": -4.32,+      "y": -2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "2",+      "text": "SD",+      "x": -3.725,+      "y": -2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "3",+      "text": "VIN",+      "x": -3.725,+      "y": -1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "4",+      "text": "VIN",+      "x": -3.725,+      "y": -0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "5",+      "text": "SYNC",+      "x": -3.725,+      "y": -0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "6",+      "text": "COMP",+      "x": -3.725,+      "y": 0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "7",+      "text": "FB",+      "x": -3.725,+      "y": 0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "8",+      "text": "RT",+      "x": -3.725,+      "y": 1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "9",+      "text": "RAMP",+      "x": -3.725,+      "y": 2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "10",+      "text": "AGND",+      "x": -3.725,+      "y": 2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "11",+      "text": "SS",+      "x": 3.725,+      "y": 2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "12",+      "text": "OUT",+      "x": 3.725,+      "y": 2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "13",+      "text": "PGND",+      "x": 3.725,+      "y": 1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "14",+      "text": "PGND",+      "x": 3.725,+      "y": 0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "15",+      "text": "IS",+      "x": 3.725,+      "y": 0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "16",+      "text": "IS",+      "x": 3.725,+      "y": -0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "17",+      "text": "SW",+      "x": 3.725,+      "y": -0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "18",+      "text": "SW",+      "x": 3.725,+      "y": -1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "19",+      "text": "PRE",+      "x": 3.725,+      "y": -2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "20",+      "text": "BST",+      "x": 3.725,+      "y": -2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -2.8875,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.8875,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "rect",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        2.15,+        3.35+      ],+      "rot": 0.0+    }+  ]+}
package.json+59−43
@@ -1,6 +1,6 @@ {   "slug": "lm25576mhx",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Texas Instruments DC-DC Converters, TSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -26,7 +26,10 @@     "docs/hero.png",     "docs/lm25576mhx-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "lm25576mhx-etched.step",+    "lm25576mhx-hero.glb",+    "lm25576mhx-hero.overlay.json"   ],   "component": {     "mpn": "LM25576MHX",@@ -51,17 +54,15 @@       "mouser": "926-LM25576MHX"     },     "distributor_check": {-      "checked_at": "2026-10-01T17:56:18Z",+      "checked_at": "2026-10-01T18:17:59Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "LM25576MHXTR-ND",-        "status": "found",-        "lifecycle": "Obsolete"+        "status": "found"       },       "mouser": {         "pn": "926-LM25576MHX",-        "status": "found",-        "lifecycle": "Obsolete"+        "status": "found"       }     },     "pins": [@@ -69,121 +70,121 @@         "number": "1",         "name": "VCC",         "type": "power_in",-        "description": "Bias regulator output providing regulated 7V nominal (or VIN direct when below 9V) with 25mA current limit; requires 0.1µF to 1µF ceramic bypass capacitor and accepts external 7.5V-14V supply to reduce IC power dissipation."+        "description": "Bias regulator output, regulated 7V nominal when Vin >9V, tracks Vin when 6V <Vin <9V, requires 0.1µF-1µF ceramic bypass capacitor."       },       {         "number": "2",         "name": "SD",         "type": "input",-        "description": "Shutdown or UVLO input controlling device state: below 0.7V activates low-power shutdown (48-85µA), 0.7V to 1.225V enables standby with VCC regulator active, above 1.225V enables normal switching with internal 5µA pull-up current source."+        "description": "Shutdown/UVLO input; voltage <0.7V disables regulator, 0.7V-1.225V standby mode, >1.225V normal operation, 0.1V hysteresis."       },       {         "number": "3",         "name": "VIN",         "type": "power_in",-        "description": "Input power supply voltage with nominal operating range 6V to 42V, absolute maximum 45V; high-quality bypass capacitors required near this pin to limit ripple voltage and prevent overshoot during load transients."+        "description": "Input power supply voltage, 6V to 42V nominal operating range, absolute maximum 45V."       },       {         "number": "4",         "name": "VIN",         "type": "power_in",-        "description": "Input power supply voltage with nominal operating range 6V to 42V, absolute maximum 45V; high-quality bypass capacitors required near this pin to limit ripple voltage and prevent overshoot during load transients."+        "description": "Input power supply voltage, 6V to 42V nominal operating range, absolute maximum 45V."       },       {         "number": "5",         "name": "SYNC",-        "type": "input",-        "description": "Oscillator synchronization input/output allowing internal oscillator to synchronize with external clock (minimum 15ns pulse width) or enable multiple LM25576 devices to synchronize together with open-drain clock driver connection."+        "type": "bidirectional",+        "description": "Oscillator sync input/output; internal oscillator syncs with external clock via pulldown, minimum pulse width 15ns, multiple devices share single SYNC line."       },       {         "number": "6",         "name": "COMP",         "type": "output",-        "description": "Error amplifier output for external loop compensation network; typically Type II RC filter configuration connecting COMP to FB pin establishes loop bandwidth and provides 90-degree phase margin for stability."+        "description": "Error amplifier output; loop compensation network connects between this pin and FB pin for Type II compensation."       },       {         "number": "7",         "name": "FB",         "type": "input",-        "description": "Feedback signal input from regulated output connected to error amplifier inverting input; internal 1.225V precision reference voltage with ±1.5% accuracy and 10nA bias current sets regulation threshold."+        "description": "Feedback input from regulator output to error amplifier inverting input, 1.225V internal regulation threshold."       },       {         "number": "8",         "name": "RT",         "type": "input",-        "description": "Oscillator frequency setting input using single external resistor connected between RT and AGND pins to establish switching frequency from 50kHz to 1MHz per formula RT = (1/(F) - 580×10⁻⁹)/(135×10⁻¹²)."+        "description": "Oscillator frequency setting input; external resistor to AGND determines operating frequency from 50kHz to 1MHz."       },       {         "number": "9",         "name": "RAMP",         "type": "output",-        "description": "Ramp control signal output with external capacitor (50pF to 2000pF recommended) connected between RAMP and AGND pins setting ramp slope compensation for current-mode control to prevent subharmonic oscillation at duty cycles above 50%."+        "description": "Ramp signal output for current mode control; external capacitor 50pF-2000pF to AGND sets ramp slope."       },       {         "number": "10",         "name": "AGND",         "type": "power_in",-        "description": "Analog ground reference for internal control circuits, error amplifier, and precision reference; low-power signal connections (CSS, RT, CRAMP) must connect directly to this pin and connect to PGND through large copper area."+        "description": "Analog ground, internal reference for regulator control functions and low-side reference for analog signals."       },       {         "number": "11",         "name": "SS",         "type": "output",-        "description": "Soft start output with external capacitor and 10µA internal current source setting error amplifier reference ramp rise time constant; held low during standby mode, VCC UVLO, and thermal shutdown events (165°C threshold)."+        "description": "Soft start output; 10µA internal current source charges external capacitor, held low during standby/Vcc UVLO/thermal shutdown."       },       {         "number": "12",         "name": "OUT",-        "type": "power_out",-        "description": "Output voltage connection point directly tied to regulated converter output through low-impedance path for external feedback network and output voltage monitoring."+        "type": "output",+        "description": "Output voltage connection pin directly connected to regulator output voltage."       },       {         "number": "13",         "name": "PGND",         "type": "power_in",-        "description": "Power ground return reference for pre-driver switch and current sense resistor low-side connection in main power switching loop; multiple connections minimize loop inductance."+        "description": "Power ground; low-side reference for PRE switch and IS sense resistor, connects to output filter capacitor ground."       },       {         "number": "14",         "name": "PGND",         "type": "power_in",-        "description": "Power ground return reference for pre-driver switch and current sense resistor low-side connection in main power switching loop; multiple connections minimize loop inductance."+        "description": "Power ground; low-side reference for PRE switch and IS sense resistor, connects to output filter capacitor ground."       },       {         "number": "15",         "name": "IS",         "type": "input",-        "description": "Current sensing input measuring recirculation diode anode current through internal 42mΩ sense resistor with sample-and-hold circuit capturing DC level at end of off-time; provides 0.5V/A transfer function for simulated current ramp."+        "description": "Current sense input for recirculation diode anode current; internal sense ratio 0.5V/A, sample/hold circuit updates at end of off-time."       },       {         "number": "16",         "name": "IS",         "type": "input",-        "description": "Current sensing input measuring recirculation diode anode current through internal 42mΩ sense resistor with sample-and-hold circuit capturing DC level at end of off-time; provides 0.5V/A transfer function for simulated current ramp."+        "description": "Current sense input for recirculation diode anode current; internal sense ratio 0.5V/A, sample/hold circuit updates at end of off-time."       },       {         "number": "17",         "name": "SW",         "type": "output",-        "description": "Buck switch source terminal output connected to external Schottky diode anode and output inductor; switches between approximately -0.5V and VIN with duty cycle limited by 500ns forced off-time to allow bootstrap capacitor recharge."+        "description": "Switch node, internal buck MOSFET source terminal, -1.5V to 14V, connects to external Schottky diode cathode and inductor."       },       {         "number": "18",         "name": "SW",         "type": "output",-        "description": "Buck switch source terminal output connected to external Schottky diode anode and output inductor; switches between approximately -0.5V and VIN with duty cycle limited by 500ns forced off-time to allow bootstrap capacitor recharge."+        "description": "Switch node, internal buck MOSFET source terminal, -1.5V to 14V, connects to external Schottky diode cathode and inductor."       },       {         "number": "19",         "name": "PRE",-        "type": "input",-        "description": "Bootstrap capacitor pre-charge assist input; open-drain output may be connected to SW pin enabling bootstrap capacitor charging during light-load conditions or output voltage pre-charge applications via 265ns internal MOSFET per cycle."+        "type": "tri_state",+        "description": "Bootstrap capacitor precharge assist; open-drain output conducts for 265ns per cycle before switch on-time to pre-charge bootstrap capacitor."       },       {         "number": "20",         "name": "BST",-        "type": "power_in",-        "description": "Bootstrap capacitor input requiring 0.022µF external ceramic capacitor connected between BST and SW pins with minimum-length PCB traces; capacitor charged from VCC through internal bootstrap diode during buck switch off-time."+        "type": "input",+        "description": "Bootstrap capacitor input; 0.022µF ceramic capacitor required between BST and SW, charges from Vcc during switch off, absolute maximum 60V."       },       {         "number": "21",@@ -193,21 +194,21 @@       }     ],     "provenance": {-      "extractor": "extract_pins 0.2",+      "extractor": "extract_pins 0.3",       "factory_chain": {         "factory": "2.0.0",-        "extractor": "extract_pins 0.2",+        "extractor": "extract_pins 0.3",         "primary_model": "claude-haiku-4-5-20251001",         "primary_mode": "text",-        "consensus_model": "claude-sonnet-4-6",+        "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin 6 (COMP) type not explicitly stated in datasheet table; inferred as output based on function des"+          "extractor flagged: PIN 6 (COMP) type is missing from the table; description 'internal error amplifier output' clearly i; PIN 19 (PRE) type contradiction: table lists type as I (Input), but description explicitly states 'o"         ],-        "pages_sent": 37,-        "cost_usd": 0.5107,-        "at": "2026-10-01T17:55:55"+        "pages_sent": 27,+        "cost_usd": 0.3181,+        "at": "2026-10-01T18:17:58"       },       "datasheet": {         "url": "https://www.ti.com/cn/lit/gpn/lm25576",@@ -240,8 +241,8 @@           6.5,           1.2         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "f542d2fda273461cf84d86caf6dd89ff5beb08db781ac05bc0e9f1f6f0461b81",         "checked": "2026-10-07",@@ -259,13 +260,28 @@           6.5,           1.2         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "2ca84f5fbdbeb603a51da804056c1009d3c9bee7072c128d7e2cb2079e78b8c6",         "checked": "2026-10-16",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]-  }+  },+  "title": "LM25576MHX",+  "brief": "Texas Instruments DC-DC Converters, TSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "TSSOP-20-EP",+      "Category": "Power Management (PMIC)",+      "Pins": "21"+    }+  },+  "discovery_triggers": [+    "lm25576mhx"+  ],+  "discovery_pitch": "LM25576MHX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",+  "visibility": "public" }
page.json+9−6
@@ -4,7 +4,7 @@   "slug": "lm25576mhx",   "title": "LM25576MHX",   "brief": "Texas Instruments DC-DC Converters, TSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -290,9 +290,12 @@     "docs/hero.png",     "docs/lm25576mhx-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "lm25576mhx-etched.step",+    "lm25576mhx-hero.glb",+    "lm25576mhx-hero.overlay.json"   ],-  "visibility": {-    "public": true-  }-}+  "visibility": "public",+  "description": "Texas Instruments DC-DC Converters, TSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file