← Commit history
lm25576mhx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+92−12
package.json+50−10@@ -69,13 +69,13 @@ "number": "1", "name": "VCC", "type": "power_in",- "description": "Bias regulator output providing regulated 7V nominal (or VIN direct when below 9V) with 25mA current limit; requires 0.1\u00b5F to 1\u00b5F ceramic bypass capacitor and accepts external 7.5V-14V supply to reduce IC power dissipation."+ "description": "Bias regulator output providing regulated 7V nominal (or VIN direct when below 9V) with 25mA current limit; requires 0.1µF to 1µF ceramic bypass capacitor and accepts external 7.5V-14V supply to reduce IC power dissipation." }, { "number": "2", "name": "SD", "type": "input",- "description": "Shutdown or UVLO input controlling device state: below 0.7V activates low-power shutdown (48-85\u00b5A), 0.7V to 1.225V enables standby with VCC regulator active, above 1.225V enables normal switching with internal 5\u00b5A pull-up current source."+ "description": "Shutdown or UVLO input controlling device state: below 0.7V activates low-power shutdown (48-85µA), 0.7V to 1.225V enables standby with VCC regulator active, above 1.225V enables normal switching with internal 5µA pull-up current source." }, { "number": "3",@@ -105,13 +105,13 @@ "number": "7", "name": "FB", "type": "input",- "description": "Feedback signal input from regulated output connected to error amplifier inverting input; internal 1.225V precision reference voltage with \u00b11.5% accuracy and 10nA bias current sets regulation threshold."+ "description": "Feedback signal input from regulated output connected to error amplifier inverting input; internal 1.225V precision reference voltage with ±1.5% accuracy and 10nA bias current sets regulation threshold." }, { "number": "8", "name": "RT", "type": "input",- "description": "Oscillator frequency setting input using single external resistor connected between RT and AGND pins to establish switching frequency from 50kHz to 1MHz per formula RT = (1/(F) - 580\u00d710\u207b\u2079)/(135\u00d710\u207b\u00b9\u00b2)."+ "description": "Oscillator frequency setting input using single external resistor connected between RT and AGND pins to establish switching frequency from 50kHz to 1MHz per formula RT = (1/(F) - 580×10⁻⁹)/(135×10⁻¹²)." }, { "number": "9",@@ -129,7 +129,7 @@ "number": "11", "name": "SS", "type": "output",- "description": "Soft start output with external capacitor and 10\u00b5A internal current source setting error amplifier reference ramp rise time constant; held low during standby mode, VCC UVLO, and thermal shutdown events (165\u00b0C threshold)."+ "description": "Soft start output with external capacitor and 10µA internal current source setting error amplifier reference ramp rise time constant; held low during standby mode, VCC UVLO, and thermal shutdown events (165°C threshold)." }, { "number": "12",@@ -153,13 +153,13 @@ "number": "15", "name": "IS", "type": "input",- "description": "Current sensing input measuring recirculation diode anode current through internal 42m\u03a9 sense resistor with sample-and-hold circuit capturing DC level at end of off-time; provides 0.5V/A transfer function for simulated current ramp."+ "description": "Current sensing input measuring recirculation diode anode current through internal 42mΩ sense resistor with sample-and-hold circuit capturing DC level at end of off-time; provides 0.5V/A transfer function for simulated current ramp." }, { "number": "16", "name": "IS", "type": "input",- "description": "Current sensing input measuring recirculation diode anode current through internal 42m\u03a9 sense resistor with sample-and-hold circuit capturing DC level at end of off-time; provides 0.5V/A transfer function for simulated current ramp."+ "description": "Current sensing input measuring recirculation diode anode current through internal 42mΩ sense resistor with sample-and-hold circuit capturing DC level at end of off-time; provides 0.5V/A transfer function for simulated current ramp." }, { "number": "17",@@ -183,7 +183,7 @@ "number": "20", "name": "BST", "type": "power_in",- "description": "Bootstrap capacitor input requiring 0.022\u00b5F external ceramic capacitor connected between BST and SW pins with minimum-length PCB traces; capacitor charged from VCC through internal bootstrap diode during buck switch off-time."+ "description": "Bootstrap capacitor input requiring 0.022µF external ceramic capacitor connected between BST and SW pins with minimum-length PCB traces; capacitor charged from VCC through internal bootstrap diode during buck switch off-time." }, { "number": "21",@@ -226,6 +226,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm25576mhx.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f542d2fda273461cf84d86caf6dd89ff5beb08db781ac05bc0e9f1f6f0461b81",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm25576mhx-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "624b672f3c22670092a415fc378a6c8d8fb38565381415e31db4f87fadc29c32",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -209,7 +209,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm25576mhx.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f542d2fda273461cf84d86caf6dd89ff5beb08db781ac05bc0e9f1f6f0461b81",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm25576mhx-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.41,+ 6.5,+ 1.2+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "624b672f3c22670092a415fc378a6c8d8fb38565381415e31db4f87fadc29c32",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -256,4 +296,4 @@ "visibility": { "public": true }-}+}