component
LM25069PMM-1
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# LM25069PMM-1++**Texas Instruments** · Surge Protection Devices (SPDs) · MSOP-10++LM25069PMM-1 from Texas Instruments, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SENSE | input | Current sense input; the voltage across the current sense resistor is measured from VIN to this pin, and when the voltage reaches 50mV the load current is limited and the fault timer activates. |+| 2 | VIN | power_in | Positive supply input; a small ceramic bypass capacitor close to this pin is recommended to suppress transients that occur when the load current is switched off. |+| 3 | UVLO/EN | input | Under-voltage lockout; an external resistor divider from the system input voltage sets the under-voltage turn-on threshold with enable threshold of 1.17V at the pin, and can be used for remote shutdown control. |+| 4 | OVLO | input | Over-voltage lockout; an external resistor divider from the system input voltage sets the over-voltage turn-off threshold with disable threshold of 1.16V at the pin. |+| 5 | GND | power_in | Circuit ground. |+| 6 | TIMER | passive | Timing capacitor; an external capacitor connected to this pin sets the insertion time delay, fault timeout period, and restart timing of the LM25069-2. |+| 7 | PWR | passive | Power limit set; an external resistor connected to this pin sets the maximum power dissipation allowed in the external series pass MOSFET. |+| 8 | PGD | output | Power good indicator open-drain output; active (high) when external MOSFET VDS decreases below 1.3V, switches low when VDS increases above 1.9V. |+| 9 | OUT | input | Output feedback connected to the output rail and external MOSFET source; internally used to determine MOSFET VDS voltage for power limiting and to control the PGD indicator. |+| 10 | GATE | output | Gate drive output connected to the external MOSFET's gate; this pin's voltage is limited at 19.5V above ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10 |+| Category | Circuit Protection |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `LM25069PMM-1`+- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`+- 3D model: MSOP-10 (KiCad packages3D, STEP)+- 3D model files: `lm25069pmm-1-etched.step` / `lm25069pmm-1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm25069pmm-1.step` / `lm25069pmm-1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm25069) (31 pp, sha256 `ed81a1b21e4ba208`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm25069pmm-1-datasheet.pdf)
page.jsonadded+165@@ -0,0 +1,165 @@+{+ "slug": "lm25069pmm-1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Surge Protection Devices (SPDs), MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "circuit protection",+ "lm25069pmm-1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm25069pmm-1.kicad_sym",+ "lm25069pmm-1.kicad_mod",+ "lm25069pmm-1.glb",+ "lm25069pmm-1.step",+ "lm25069pmm-1.lbr",+ "docs/hero.png",+ "docs/lm25069pmm-1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM25069PMM-1",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-10",+ "pin_count": 10,+ "category": "Circuit Protection",+ "subcategory": "Surge Protection Devices (SPDs)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm25069",+ "parts": {+ "symbol": "lm25069pmm-1.kicad_sym",+ "footprint": "lm25069pmm-1.kicad_mod",+ "model_3d": "lm25069pmm-1-etched.glb",+ "model_3d_plain": "lm25069pmm-1.glb",+ "model_3d_step": "lm25069pmm-1-etched.step",+ "model_3d_step_plain": "lm25069pmm-1.step",+ "lbr": "lm25069pmm-1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2861433"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T02:58:42Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SENSE",+ "type": "input",+ "description": "Current sense input; the voltage across the current sense resistor is measured from VIN to this pin, and when the voltage reaches 50mV the load current is limited and the fault timer activates."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Positive supply input; a small ceramic bypass capacitor close to this pin is recommended to suppress transients that occur when the load current is switched off."+ },+ {+ "number": "3",+ "name": "UVLO/EN",+ "type": "input",+ "description": "Under-voltage lockout; an external resistor divider from the system input voltage sets the under-voltage turn-on threshold with enable threshold of 1.17V at the pin, and can be used for remote shutdown control."+ },+ {+ "number": "4",+ "name": "OVLO",+ "type": "input",+ "description": "Over-voltage lockout; an external resistor divider from the system input voltage sets the over-voltage turn-off threshold with disable threshold of 1.16V at the pin."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Circuit ground."+ },+ {+ "number": "6",+ "name": "TIMER",+ "type": "passive",+ "description": "Timing capacitor; an external capacitor connected to this pin sets the insertion time delay, fault timeout period, and restart timing of the LM25069-2."+ },+ {+ "number": "7",+ "name": "PWR",+ "type": "passive",+ "description": "Power limit set; an external resistor connected to this pin sets the maximum power dissipation allowed in the external series pass MOSFET."+ },+ {+ "number": "8",+ "name": "PGD",+ "type": "output",+ "description": "Power good indicator open-drain output; active (high) when external MOSFET VDS decreases below 1.3V, switches low when VDS increases above 1.9V."+ },+ {+ "number": "9",+ "name": "OUT",+ "type": "input",+ "description": "Output feedback connected to the output rail and external MOSFET source; internally used to determine MOSFET VDS voltage for power limiting and to control the PGD indicator."+ },+ {+ "number": "10",+ "name": "GATE",+ "type": "output",+ "description": "Gate drive output connected to the external MOSFET's gate; this pin's voltage is limited at 19.5V above ground."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 6,+ "cost_usd": 0.0598,+ "at": "2026-10-01T02:58:26"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm25069",+ "pages": 31,+ "sha256": "ed81a1b21e4ba208",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}