← Commit history

lm25010mh: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·f0d51fef48 · ·parent 3c41997
2 files changed +90−10
package.json+48−8
@@ -81,19 +81,19 @@         "number": "3",         "name": "BST",         "type": "input",-        "description": "Bootstrap pin for gate driver capacitor; connects 0.022\u00b5F capacitor from SW, charged from VCC during OFF-time; maximum 59V to RTN, 14V to VCC."+        "description": "Bootstrap pin for gate driver capacitor; connects 0.022µF capacitor from SW, charged from VCC during OFF-time; maximum 59V to RTN, 14V to VCC."       },       {         "number": "4",         "name": "ISEN",         "type": "input",-        "description": "Current sense input; inductor current flows out during OFF-time through 130m\u03a9 internal sense resistor; threshold 1.25A typical (1.0A to 1.5A range)."+        "description": "Current sense input; inductor current flows out during OFF-time through 130mΩ internal sense resistor; threshold 1.25A typical (1.0A to 1.5A range)."       },       {         "number": "5",         "name": "SGND",         "type": "power_in",-        "description": "Current sense ground return; recirculating current flows into this pin to the current sense resistor; maximum \u00b10.3V relative to RTN."+        "description": "Current sense ground return; recirculating current flows into this pin to the current sense resistor; maximum ±0.3V relative to RTN."       },       {         "number": "6",@@ -117,13 +117,13 @@         "number": "9",         "name": "FB",         "type": "input",-        "description": "Feedback voltage input from regulated output; compared to 2.5V \u00b12% regulation reference and 2.9V overvoltage threshold; input bias current <1nA."+        "description": "Feedback voltage input from regulated output; compared to 2.5V ±2% regulation reference and 2.9V overvoltage threshold; input bias current <1nA."       },       {         "number": "10",         "name": "SS",         "type": "input",-        "description": "Soft start capacitor pin; charged by internal 11.5\u00b5A current source to 2.5V during startup; voltage rating 4V maximum to RTN."+        "description": "Soft start capacitor pin; charged by internal 11.5µA current source to 2.5V during startup; voltage rating 4V maximum to RTN."       },       {         "number": "11",@@ -135,7 +135,7 @@         "number": "12",         "name": "VCC",         "type": "power_in",-        "description": "Bias regulator output; 6.6V to 7.4V for VIN \u2265 8.9V, tracks VIN \u00b1100mV for VIN < 8.9V; absolute maximum 14V to RTN."+        "description": "Bias regulator output; 6.6V to 7.4V for VIN ≥ 8.9V, tracks VIN ±100mV for VIN < 8.9V; absolute maximum 14V to RTN."       },       {         "number": "13",@@ -191,6 +191,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm25010mh.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm25010mh-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a3d353935f156ecafa5f4b43fe0632e97517c430c4a9eef96ecc7bd2edacec0f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -176,7 +176,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm25010mh.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm25010mh-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a3d353935f156ecafa5f4b43fe0632e97517c430c4a9eef96ecc7bd2edacec0f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -223,4 +263,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}