← Commit history

Initial commit: component/lm25010mh

Ray ·21e9729f5e ·
2 files changed +253
README.mdadded+51
@@ -0,0 +1,51 @@+# LM25010MH++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++LM25010MH from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No internal connection; may be connected to ground plane for heat dissipation. |+| 2 | SW | output | Switching node connected to buck switch source; internally driven, voltage rating -1.5V to 45V relative to RTN. |+| 3 | BST | input | Bootstrap pin for gate driver capacitor; connects 0.022µF capacitor from SW, charged from VCC during OFF-time; maximum 59V to RTN, 14V to VCC. |+| 4 | ISEN | input | Current sense input; inductor current flows out during OFF-time through 130mΩ internal sense resistor; threshold 1.25A typical (1.0A to 1.5A range). |+| 5 | SGND | power_in | Current sense ground return; recirculating current flows into this pin to the current sense resistor; maximum ±0.3V relative to RTN. |+| 6 | RTN | power_in | Reference ground return for all internal circuitry except the current sense resistor; baseline for absolute voltage ratings. |+| 7 | NC | unconnected | No internal connection; may be connected to ground plane for heat dissipation. |+| 8 | NC | unconnected | No internal connection; may be connected to ground plane for heat dissipation. |+| 9 | FB | input | Feedback voltage input from regulated output; compared to 2.5V ±2% regulation reference and 2.9V overvoltage threshold; input bias current <1nA. |+| 10 | SS | input | Soft start capacitor pin; charged by internal 11.5µA current source to 2.5V during startup; voltage rating 4V maximum to RTN. |+| 11 | RON/SD | input | ON-time control resistor input and shutdown pin; external resistor from VIN sets ON-time; grounding disables regulator with 0.7V threshold and 40mV hysteresis. |+| 12 | VCC | power_in | Bias regulator output; 6.6V to 7.4V for VIN ≥ 8.9V, tracks VIN ±100mV for VIN < 8.9V; absolute maximum 14V to RTN. |+| 13 | VIN | power_in | Input supply voltage; operating range 6V to 42V nominal; absolute maximum 45V to RTN; input bypass capacitors required. |+| 14 | NC | unconnected | No internal connection; may be connected to ground plane for heat dissipation. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `LM25010MH`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `lm25010mh-etched.step` / `lm25010mh-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm25010mh.step` / `lm25010mh.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm25010-q1) (35 pp, sha256 `d5d36a8196d36262`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm25010mh-datasheet.pdf)
page.jsonadded+202
@@ -0,0 +1,202 @@+{+  "slug": "lm25010mh",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm25010mh",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm25010mh.kicad_sym",+    "lm25010mh.kicad_mod",+    "lm25010mh.glb",+    "lm25010mh.step",+    "lm25010mh.lbr",+    "docs/hero.png",+    "docs/lm25010mh-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM25010MH",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-14-EP",+    "pin_count": 15,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm25010-q1",+    "parts": {+      "symbol": "lm25010mh.kicad_sym",+      "footprint": "lm25010mh.kicad_mod",+      "model_3d": "lm25010mh-etched.glb",+      "model_3d_plain": "lm25010mh.glb",+      "model_3d_step": "lm25010mh-etched.step",+      "model_3d_step_plain": "lm25010mh.step",+      "lbr": "lm25010mh.lbr"+    },+    "distributor_links": {+      "lcsc": "C2862389",+      "digikey": "LM25010MH-ND",+      "mouser": "926-LM25010MH"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T14:22:25Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "LM25010MH-ND",+        "status": "found",+        "lifecycle": "Obsolete"+      },+      "mouser": {+        "pn": "926-LM25010MH",+        "status": "found",+        "lifecycle": "Obsolete"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; may be connected to ground plane for heat dissipation."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "output",+        "description": "Switching node connected to buck switch source; internally driven, voltage rating -1.5V to 45V relative to RTN."+      },+      {+        "number": "3",+        "name": "BST",+        "type": "input",+        "description": "Bootstrap pin for gate driver capacitor; connects 0.022µF capacitor from SW, charged from VCC during OFF-time; maximum 59V to RTN, 14V to VCC."+      },+      {+        "number": "4",+        "name": "ISEN",+        "type": "input",+        "description": "Current sense input; inductor current flows out during OFF-time through 130mΩ internal sense resistor; threshold 1.25A typical (1.0A to 1.5A range)."+      },+      {+        "number": "5",+        "name": "SGND",+        "type": "power_in",+        "description": "Current sense ground return; recirculating current flows into this pin to the current sense resistor; maximum ±0.3V relative to RTN."+      },+      {+        "number": "6",+        "name": "RTN",+        "type": "power_in",+        "description": "Reference ground return for all internal circuitry except the current sense resistor; baseline for absolute voltage ratings."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; may be connected to ground plane for heat dissipation."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; may be connected to ground plane for heat dissipation."+      },+      {+        "number": "9",+        "name": "FB",+        "type": "input",+        "description": "Feedback voltage input from regulated output; compared to 2.5V ±2% regulation reference and 2.9V overvoltage threshold; input bias current <1nA."+      },+      {+        "number": "10",+        "name": "SS",+        "type": "input",+        "description": "Soft start capacitor pin; charged by internal 11.5µA current source to 2.5V during startup; voltage rating 4V maximum to RTN."+      },+      {+        "number": "11",+        "name": "RON/SD",+        "type": "input",+        "description": "ON-time control resistor input and shutdown pin; external resistor from VIN sets ON-time; grounding disables regulator with 0.7V threshold and 40mV hysteresis."+      },+      {+        "number": "12",+        "name": "VCC",+        "type": "power_in",+        "description": "Bias regulator output; 6.6V to 7.4V for VIN ≥ 8.9V, tracks VIN ±100mV for VIN < 8.9V; absolute maximum 14V to RTN."+      },+      {+        "number": "13",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage; operating range 6V to 42V nominal; absolute maximum 45V to RTN; input bypass capacitors required."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; may be connected to ground plane for heat dissipation."+      },+      {+        "number": "15",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed pad (EP/thermal pad) is documented in the pin functions table on page 3 but is not assigned ",+          "exposed pad 15 added from the footprint"+        ],+        "pages_sent": 35,+        "cost_usd": 0.3821,+        "at": "2026-09-27T14:22:10"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm25010-q1",+        "pages": 35,+        "sha256": "d5d36a8196d36262",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 15,+        "described": 15,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file