← Commit history

Publish 0.1.1

Ray ·056ca592ce · ·parent adb7e6d
4 files changed +484−463
README.md+30−30
@@ -8,20 +8,20 @@ LM239N from HGSEMI, in a DIP-14. Pinout and pin descriptions extracted from the  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OUT2 | output | Comparator 2 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current. |-| 2 | OUT1 | output | Comparator 1 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current. |-| 3 | Vcc | power_in | Positive supply pin; the recommended supply is 3 to 32 V single-supply or ±1.5 to ±16 V split-supply, with an absolute maximum of 36 V or ±18 V. |-| 4 | IN1(-) | input | Inverting input of comparator 1; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V. |-| 5 | IN1(+) | input | Non-inverting input of comparator 1; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V. |-| 6 | IN2(-) | input | Inverting input of comparator 2; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V. |-| 7 | IN2(+) | input | Non-inverting input of comparator 2; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V. |-| 8 | IN3(-) | input | Inverting input of comparator 3; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V. |-| 9 | IN3(+) | input | Non-inverting input of comparator 3; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V. |-| 10 | IN4(-) | input | Inverting input of comparator 4; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V. |-| 11 | IN4(+) | input | Non-inverting input of comparator 4; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V. |+| 1 | OUT2 | output | Output of comparator 2; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V. |+| 2 | OUT1 | output | Output of comparator 1; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V. |+| 3 | Vcc | power_in | Positive supply; recommended supply range is 3 to 32 V (single supply) or ±1.5 to ±16 V (dual supply), with an absolute maximum of 36 V or ±18 V. |+| 4 | IN1(-) | input | Inverting input of comparator 1; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc. |+| 5 | IN1(+) | input | Non-inverting input of comparator 1; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc. |+| 6 | IN2(-) | input | Inverting input of comparator 2; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc. |+| 7 | IN2(+) | input | Non-inverting input of comparator 2; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc. |+| 8 | IN3(-) | input | Inverting input of comparator 3; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc. |+| 9 | IN3(+) | input | Non-inverting input of comparator 3; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc. |+| 10 | IN4(-) | input | Inverting input of comparator 4; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc. |+| 11 | IN4(+) | input | Non-inverting input of comparator 4; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc. | | 12 | GND | power_in | Ground reference pin for the device. |-| 13 | OUT4 | output | Comparator 4 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current. |-| 14 | OUT3 | output | Comparator 3 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current. |+| 13 | OUT4 | output | Output of comparator 4; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V. |+| 14 | OUT3 | output | Output of comparator 3; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V. |  ## Key specifications @@ -38,32 +38,32 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|+| Supply voltage (single supply) | Vcc |  |  | 36 | V |  | 3 |+| Input differential voltage | VIDR |  |  | 36 | V |  | 3 |+| Input common-mode voltage range | VICMR | -0.3 |  |  | V |  | 3 |+| Output current | ISC |  |  | 50 | mA |  | 3 |+| Power dissipation | PD |  |  | 1 | W | (*) above 25°C, derate 8 mW per °C | 3 |+| Storage temperature | Tstg | -65 |  | 150 | °C |  | 3 |+| Lead temperature | TLEAD |  |  | 260 | °C | soldering 10 s | 3 |+| Supply voltage | Vcc | 3 |  | 32 | V |  | 3 |+| Operating ambient temperature (LM239) | Tamb | -40 |  | 85 | °C | LM239 | 3 | | Input offset voltage | VIO |  | 3 | 7 | mV | Ta=25℃ | 4 | | Input offset voltage | VIO |  |  | 9 | mV | -40℃≤Ta≤85℃ | 4 | | Input offset current | IIO |  | 5 | 50 | nA | Ta=25℃ | 4 | | Input offset current | IIO |  |  | 150 | nA | -40℃≤Ta≤85℃ | 4 | | Input bias current | IIB |  | 25 | 250 | nA | Ta=25℃ | 4 | | Input bias current | IIB |  |  | 400 | nA | -40℃≤Ta≤85℃ | 4 |-| Input common-mode voltage range | VICR | 0 |  |  | V | Ta=25℃; upper limit printed as Vcc-1.5 | 4 |+| Input common-mode voltage range | VICR | 0 |  |  | V | Ta=25℃ | 4 | | Supply current | Icc |  | 0.8 | 2 | mA | RL=∞ | 4 |-| Supply current | Icc |  | 1 | 2.5 | mA | RL=∞,Vcc=30V | 4 |-| Voltage gain | Gv | 50 | 200 |  | V/mV | RL 15K,Vcc=15V | 4 |+| Supply current | Icc |  | 1 | 2.5 | mA | RL=∞, Vcc=30V | 4 |+| Voltage gain | Gv | 50 | 200 |  | V/mV | RL 15K, Vcc=15V | 4 | | Large signal response time | tRES |  | 300 |  | ns | VIN=TTL logic swing, VREF=1.4V, VRL=5.0V, RL=5.1KΩ | 4 | | Response time | tRES |  | 1.3 |  | ns | VRL=5.0V, RL=5.1KΩ | 4 |-| Output sink current | ISINK | 6 | 16 |  | mA | VIN(-)1.0V,VIN(+)=0V,Vo1.5V | 4 |-| Output saturation voltage | VSAT |  | 130 | 400 | mV | VIN(-)1.0V,VIN(+)=0V,ISINK4.0mA | 4 |-| Output saturation voltage | VSAT |  |  | 700 | mV | VIN(-)1.0V,VIN(+)=0V,ISINK4.0mA,-40℃≤Ta≤85℃ | 4 |-| Output leakage current | IOL |  | 0.1 |  | nA | VIN(+)1.0V,VIN(-)=0V,Vo=5.0V | 4 |-| Output leakage current | IOL |  |  | 1000 | nA | -40℃≤Ta≤85℃ | 4 |-| Supply voltage | Vcc |  |  | 36 | V | Single supply; dual supply ±18 V as printed | 3 |-| Input differential voltage range | VIDR |  |  | 36 | V |  | 3 |-| Input common-mode voltage range | VICMR | -0.3 |  |  | V | Upper limit printed as Vcc | 3 |-| Output current | ISC |  |  | 50 | mA |  | 3 |-| Power dissipation | PD |  |  | 1 | W | Tamb=25℃; derate 8 mW/℃ above 25℃ | 3 |-| Storage temperature | Tstg | -65 |  | 150 | ℃ |  | 3 |-| Lead temperature (soldering) | TLEAD |  |  | 260 | ℃ | 10 s soldering | 3 |-| Supply voltage | Vcc | 3 |  | 32 | V | Single supply; dual supply ±1.5 to ±16 V as printed | 3 |-| Operating ambient temperature | Tamb | -40 |  | 85 | ℃ | LM239 variant | 3 |+| Output sink current | ISINK | 6 | 16 |  | mA | VIN(-)=1.0V, VIN(+)=0V, Vo≤1.5V | 4 |+| Output saturation voltage | VSAT |  | 130 | 400 | mV | VIN(-)=1.0V, VIN(+)=0V, ISINK=4.0mA | 4 |+| Output saturation voltage | VSAT |  |  | 700 | mV | VIN(-)=1.0V, VIN(+)=0V, ISINK=4.0mA, -40℃≤Ta≤85℃ | 4 |+| Output leakage current | IOL |  | 0.1 |  | nA | VIN(+)=1.0V, VIN(-)=0V, Vo=5.0V | 4 |+| Output leakage current | IOL |  |  | 1000 | nA | VIN(+)=1.0V, VIN(-)=0V, Vo=30V, -40℃≤Ta≤85℃ | 4 |  ## CAD (KiCad official) 
lm239n-hero.overlay.json+397−392
@@ -1,397 +1,402 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "LM239N",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 14,-      "span_mm": 16.84,-      "dash_mm": 0.421,-      "gap_mm": 0.2526,-      "pad_stroke_mm": 0.09-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 6,-      "pin1": {-        "source": "added dot (AI)",-        "pad": "1",-        "center_mm": [-          0.0,-          -1.35-        ],-        "r_mm": 0.35-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 14,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "LM239N",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 14,+   "span_mm": 16.84,+   "dash_mm": 0.421,+   "gap_mm": 0.2526,+   "pad_stroke_mm": 0.09   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 1.347,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -0.127,-      7.747,-      -15.354,-      0.114+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 6,+   "pin1": {+    "source": "added dot (AI)",+    "pad": "1",+    "center_mm": [+     0.0,+     -1.35     ],-    "pads_bbox_mm": [-      -0.8,-      8.42,-      -16.04,-      0.8-    ],-    "seating_z_mm": -3.3-  },-  "sources": {-    "glb": "lm239n-etched.glb",-    "glb_sha256": "afafd55fcfb272c0271396e4c1e9ea34aade4b1fa9cf379aa1197efd6fb2c713",-    "footprint": "lm239n.kicad_mod",-    "footprint_sha256": "45cf0d69e6038dc3015e395a519a24069fcfff2d70340934683d4241b2098762",-    "pins": "page.json component.pins",-    "pins_sha256": "461e8f51e0d07b29c2336afca5e4b58a139444f6a6128b327ada81b44a61f5e0"+    "r_mm": 0.35+   }   },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "OUT2",-      "x": -0.95,-      "y": 0.0,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "OUT1",-      "x": -0.95,-      "y": 2.54,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "Vcc",-      "x": -0.95,-      "y": 5.08,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "IN1(-)",-      "x": -0.95,-      "y": 7.62,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "IN1(+)",-      "x": -0.95,-      "y": 10.16,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "IN2(-)",-      "x": -0.95,-      "y": 12.7,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "IN2(+)",-      "x": -0.95,-      "y": 15.24,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "IN3(-)",-      "x": 8.57,-      "y": 15.24,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "IN3(+)",-      "x": 8.57,-      "y": 12.7,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "IN4(-)",-      "x": 8.57,-      "y": 10.16,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "IN4(+)",-      "x": 8.57,-      "y": 7.62,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "GND",-      "x": 8.57,-      "y": 5.08,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "OUT4",-      "x": 8.57,-      "y": 2.54,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "OUT3",-      "x": 8.57,-      "y": 0.0,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 14,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": false,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 1.347,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -0.127,+   7.747,+   -15.354,+   0.114   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        0.0,-        0.0-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "circle",-      "center_mm": [-        0.0,-        2.54-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "circle",-      "center_mm": [-        0.0,-        5.08-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "circle",-      "center_mm": [-        0.0,-        7.62-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "circle",-      "center_mm": [-        0.0,-        10.16-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "circle",-      "center_mm": [-        0.0,-        12.7-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "circle",-      "center_mm": [-        0.0,-        15.24-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "circle",-      "center_mm": [-        7.62,-        15.24-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "circle",-      "center_mm": [-        7.62,-        12.7-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "circle",-      "center_mm": [-        7.62,-        10.16-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "circle",-      "center_mm": [-        7.62,-        7.62-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "circle",-      "center_mm": [-        7.62,-        5.08-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "circle",-      "center_mm": [-        7.62,-        2.54-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "circle",-      "center_mm": [-        7.62,-        0.0-      ],-      "size_mm": [-        1.6,-        1.6-      ],-      "rot": 0.0-    }-  ]-}+  "pads_bbox_mm": [+   -0.8,+   8.42,+   -16.04,+   0.8+  ],+  "seating_z_mm": -3.3+ },+ "sources": {+  "glb": "lm239n-etched.glb",+  "glb_sha256": "afafd55fcfb272c0271396e4c1e9ea34aade4b1fa9cf379aa1197efd6fb2c713",+  "footprint": "lm239n.kicad_mod",+  "footprint_sha256": "45cf0d69e6038dc3015e395a519a24069fcfff2d70340934683d4241b2098762",+  "pins": "page.json component.pins",+  "pins_sha256": "461e8f51e0d07b29c2336afca5e4b58a139444f6a6128b327ada81b44a61f5e0"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "OUT2",+   "x": -0.95,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "OUT1",+   "x": -0.95,+   "y": 2.54,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "Vcc",+   "x": -0.95,+   "y": 5.08,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "IN1(-)",+   "x": -0.95,+   "y": 7.62,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "IN1(+)",+   "x": -0.95,+   "y": 10.16,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "IN2(-)",+   "x": -0.95,+   "y": 12.7,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "IN2(+)",+   "x": -0.95,+   "y": 15.24,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "IN3(-)",+   "x": 8.57,+   "y": 15.24,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "IN3(+)",+   "x": 8.57,+   "y": 12.7,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "IN4(-)",+   "x": 8.57,+   "y": 10.16,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "IN4(+)",+   "x": 8.57,+   "y": 7.62,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "GND",+   "x": 8.57,+   "y": 5.08,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "OUT4",+   "x": 8.57,+   "y": 2.54,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "OUT3",+   "x": 8.57,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    0.0,+    0.0+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "circle",+   "center_mm": [+    0.0,+    2.54+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "circle",+   "center_mm": [+    0.0,+    5.08+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "circle",+   "center_mm": [+    0.0,+    7.62+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "circle",+   "center_mm": [+    0.0,+    10.16+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "circle",+   "center_mm": [+    0.0,+    12.7+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "circle",+   "center_mm": [+    0.0,+    15.24+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "circle",+   "center_mm": [+    7.62,+    15.24+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "circle",+   "center_mm": [+    7.62,+    12.7+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "circle",+   "center_mm": [+    7.62,+    10.16+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "circle",+   "center_mm": [+    7.62,+    7.62+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "circle",+   "center_mm": [+    7.62,+    5.08+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "circle",+   "center_mm": [+    7.62,+    2.54+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "circle",+   "center_mm": [+    7.62,+    0.0+   ],+   "size_mm": [+    1.6,+    1.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
package.json+27−20
@@ -1,6 +1,6 @@ {   "slug": "lm239n",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "HGSEMI Comparators, DIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -54,7 +54,7 @@       "mouser": "595-LM239N"     },     "distributor_check": {-      "checked_at": "2026-11-12T03:50:20Z",+      "checked_at": "2026-11-12T05:39:57Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-6621-5-ND",@@ -70,67 +70,67 @@         "number": "1",         "name": "OUT2",         "type": "output",-        "description": "Comparator 2 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current."+        "description": "Output of comparator 2; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V."       },       {         "number": "2",         "name": "OUT1",         "type": "output",-        "description": "Comparator 1 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current."+        "description": "Output of comparator 1; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V."       },       {         "number": "3",         "name": "Vcc",         "type": "power_in",-        "description": "Positive supply pin; the recommended supply is 3 to 32 V single-supply or ±1.5 to ±16 V split-supply, with an absolute maximum of 36 V or ±18 V."+        "description": "Positive supply; recommended supply range is 3 to 32 V (single supply) or ±1.5 to ±16 V (dual supply), with an absolute maximum of 36 V or ±18 V."       },       {         "number": "4",         "name": "IN1(-)",         "type": "input",-        "description": "Inverting input of comparator 1; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Inverting input of comparator 1; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "5",         "name": "IN1(+)",         "type": "input",-        "description": "Non-inverting input of comparator 1; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Non-inverting input of comparator 1; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "6",         "name": "IN2(-)",         "type": "input",-        "description": "Inverting input of comparator 2; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Inverting input of comparator 2; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "7",         "name": "IN2(+)",         "type": "input",-        "description": "Non-inverting input of comparator 2; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Non-inverting input of comparator 2; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "8",         "name": "IN3(-)",         "type": "input",-        "description": "Inverting input of comparator 3; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Inverting input of comparator 3; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "9",         "name": "IN3(+)",         "type": "input",-        "description": "Non-inverting input of comparator 3; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Non-inverting input of comparator 3; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "10",         "name": "IN4(-)",         "type": "input",-        "description": "Inverting input of comparator 4; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Inverting input of comparator 4; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "11",         "name": "IN4(+)",         "type": "input",-        "description": "Non-inverting input of comparator 4; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Non-inverting input of comparator 4; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "12",@@ -142,13 +142,13 @@         "number": "13",         "name": "OUT4",         "type": "output",-        "description": "Comparator 4 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current."+        "description": "Output of comparator 4; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V."       },       {         "number": "14",         "name": "OUT3",         "type": "output",-        "description": "Comparator 3 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current."+        "description": "Output of comparator 3; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V."       }     ],     "provenance": {@@ -162,11 +162,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The DIP-14 pinout was taken from the function table on page 2 (DIP/SOP/TSSOP column). The pin-arrang; The datasheet does not label Vcc or GND as power_in in the table. The type follows the instruction t"+          "extractor flagged: The DIP-14 column of the page 2 pin table was used (first numeric column: DIP/SOP/TSSOP). The LM239N; The datasheet names pins by function only and gives no per-pin electrical limits. Pin descriptions c; The output pin type 'output' is inferred from the sink-current and leakage-current specifications on"         ],         "pages_sent": 11,-        "cost_usd": 0.0425,-        "at": "2026-11-12T03:50:12"+        "cost_usd": 0.0445,+        "at": "2026-11-12T05:39:50"       },       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8760109431739043840",@@ -221,7 +221,7 @@         "zmin_mm": -3.3,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "191897e7baa98fd99ae9f6279dd0dd1b619a8f6a29ea8940aec637888e65bf28",+        "sha256": "8ed59ab9628a08d5753bd9ec756ecdd49444a2a2ecd8f8b6e1baa0a05eceab35",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -257,12 +257,19 @@           null         ]       },+      "A": {+        "nom_mm": 3.325,+        "range_mm": [+          3.1,+          3.55+        ]+      },       "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",       "model_check": {         "file": "lm239n.step",         "verdict": "PASS",         "reasons": [-          "body within the datasheet's package drawing"+          "height and body within the datasheet's package drawing"         ],         "by": "factory/package_fit.py"       }
page.json+30−21
@@ -4,7 +4,7 @@   "slug": "lm239n",   "title": "LM239N",   "brief": "HGSEMI Comparators, DIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "595-LM239N"     },     "distributor_check": {-      "checked_at": "2026-11-12T03:50:20Z",+      "checked_at": "2026-11-12T05:39:57Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-6621-5-ND",@@ -52,67 +52,67 @@         "number": "1",         "name": "OUT2",         "type": "output",-        "description": "Comparator 2 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current."+        "description": "Output of comparator 2; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V."       },       {         "number": "2",         "name": "OUT1",         "type": "output",-        "description": "Comparator 1 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current."+        "description": "Output of comparator 1; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V."       },       {         "number": "3",         "name": "Vcc",         "type": "power_in",-        "description": "Positive supply pin; the recommended supply is 3 to 32 V single-supply or ±1.5 to ±16 V split-supply, with an absolute maximum of 36 V or ±18 V."+        "description": "Positive supply; recommended supply range is 3 to 32 V (single supply) or ±1.5 to ±16 V (dual supply), with an absolute maximum of 36 V or ±18 V."       },       {         "number": "4",         "name": "IN1(-)",         "type": "input",-        "description": "Inverting input of comparator 1; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Inverting input of comparator 1; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "5",         "name": "IN1(+)",         "type": "input",-        "description": "Non-inverting input of comparator 1; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Non-inverting input of comparator 1; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "6",         "name": "IN2(-)",         "type": "input",-        "description": "Inverting input of comparator 2; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Inverting input of comparator 2; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "7",         "name": "IN2(+)",         "type": "input",-        "description": "Non-inverting input of comparator 2; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Non-inverting input of comparator 2; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "8",         "name": "IN3(-)",         "type": "input",-        "description": "Inverting input of comparator 3; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Inverting input of comparator 3; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "9",         "name": "IN3(+)",         "type": "input",-        "description": "Non-inverting input of comparator 3; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Non-inverting input of comparator 3; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "10",         "name": "IN4(-)",         "type": "input",-        "description": "Inverting input of comparator 4; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Inverting input of comparator 4; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "11",         "name": "IN4(+)",         "type": "input",-        "description": "Non-inverting input of comparator 4; the recommended common-mode range is (V-) - 0.1 V to (V+) - 2 V."+        "description": "Non-inverting input of comparator 4; the common-mode input range is (V-) - 0.1 V to (V+) - 2 V recommended, with an absolute maximum of -0.3 V to Vcc."       },       {         "number": "12",@@ -124,13 +124,13 @@         "number": "13",         "name": "OUT4",         "type": "output",-        "description": "Comparator 4 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current."+        "description": "Output of comparator 4; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V."       },       {         "number": "14",         "name": "OUT3",         "type": "output",-        "description": "Comparator 3 output; the datasheet specifies an output saturation voltage of 130 mV typical and 400 mV maximum at a 4.0 mA sink current."+        "description": "Output of comparator 3; the datasheet gives an absolute maximum output current (ISC) of 50 mA and a sink current of 6.0 mA min at VO = 1.5 V."       }     ],     "provenance": {@@ -144,11 +144,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The DIP-14 pinout was taken from the function table on page 2 (DIP/SOP/TSSOP column). The pin-arrang; The datasheet does not label Vcc or GND as power_in in the table. The type follows the instruction t"+          "extractor flagged: The DIP-14 column of the page 2 pin table was used (first numeric column: DIP/SOP/TSSOP). The LM239N; The datasheet names pins by function only and gives no per-pin electrical limits. Pin descriptions c; The output pin type 'output' is inferred from the sink-current and leakage-current specifications on"         ],         "pages_sent": 11,-        "cost_usd": 0.0425,-        "at": "2026-11-12T03:50:12"+        "cost_usd": 0.0445,+        "at": "2026-11-12T05:39:50"       },       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8760109431739043840",@@ -203,7 +203,7 @@         "zmin_mm": -3.3,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "191897e7baa98fd99ae9f6279dd0dd1b619a8f6a29ea8940aec637888e65bf28",+        "sha256": "8ed59ab9628a08d5753bd9ec756ecdd49444a2a2ecd8f8b6e1baa0a05eceab35",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -239,12 +239,19 @@           null         ]       },+      "A": {+        "nom_mm": 3.325,+        "range_mm": [+          3.1,+          3.55+        ]+      },       "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",       "model_check": {         "file": "lm239n.step",         "verdict": "PASS",         "reasons": [-          "body within the datasheet's package drawing"+          "height and body within the datasheet's package drawing"         ],         "by": "factory/package_fit.py"       }@@ -616,5 +623,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "HGSEMI Comparators, DIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file