← Commit history
lm235z: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+87−7
package.json+45−5@@ -53,19 +53,19 @@ "number": "1", "name": "ADJ", "type": "passive",- "description": "Optional calibration terminal; connecting a trim potentiometer here allows the output voltage to be adjusted (e.g., to 2.982V at 25\u00b0C) for higher accuracy per the single-point calibration method described in the Application information section."+ "description": "Optional calibration terminal; connecting a trim potentiometer here allows the output voltage to be adjusted (e.g., to 2.982V at 25°C) for higher accuracy per the single-point calibration method described in the Application information section." }, { "number": "2", "name": "V+", "type": "power_in",- "description": "Terminal of the 2-terminal Zener-type sensor through which the bias current (450\u00b5A to 5mA per the device description) is applied; the breakdown voltage measured relative to V- is directly proportional to absolute temperature at 10mV/\u00b0K."+ "description": "Terminal of the 2-terminal Zener-type sensor through which the bias current (450µA to 5mA per the device description) is applied; the breakdown voltage measured relative to V- is directly proportional to absolute temperature at 10mV/°K." }, { "number": "3", "name": "V-", "type": "power_in",- "description": "Return terminal of the 2-terminal Zener-type sensor, completing the current path set by the external bias resistor; dynamic impedance between V+ and V- is less than 1\u03a9."+ "description": "Return terminal of the 2-terminal Zener-type sensor, completing the current path set by the external bias resistor; dynamic impedance between V+ and V- is less than 1Ω." } ], "provenance": {@@ -102,6 +102,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm235z.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm235z-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "4231f4ec2dac05bc302e3a16dbbf3e993921ee4563346c6e26b2785e176a3455",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -87,7 +87,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm235z.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm235z-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "4231f4ec2dac05bc302e3a16dbbf3e993921ee4563346c6e26b2785e176a3455",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -134,4 +174,4 @@ "visibility": { "public": true }-}+}