← Commit history
page.json+122−8@@ -1,13 +1,132 @@ {+ "schema_version": 1,+ "type": "component", "slug": "lm22676mrx-adj",+ "title": "LM22676MRX-ADJ",+ "brief": "Texas Instruments DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "lm22676mrx-adj" ],+ "component": {+ "mpn": "LM22676MRX-ADJ",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8-EP",+ "pin_count": 9,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lm22676mrx-adj.pdf",+ "parts": {+ "symbol": "lm22676mrx-adj.kicad_sym",+ "footprint": "lm22676mrx-adj.kicad_mod",+ "model_3d": "lm22676mrx-adj.glb",+ "model_3d_step": "lm22676mrx-adj.step",+ "lbr": "lm22676mrx-adj.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "BOOT",+ "type": "passive",+ "description": "Bootstrap input. Provides the gate drive voltage for the high-side N-channel MOSFET. Requires an external bootstrap capacitor tied between BOOT and SW; internal boot-strap diode charges it each cycle."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "Not Connected. Not electrically connected inside the chip; pin does not function as a thermal conductor. May be left floating."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "Not Connected. Not electrically connected inside the chip; pin does not function as a thermal conductor. May be left floating."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback input to the regulator error amplifier. In the ADJ version, tie a resistor divider from VOUT to FB to GND to set output voltage; VFB(typ) = 1.285 V. Absolute max -0.5 V to 7 V."+ },+ {+ "number": "5",+ "name": "EN",+ "type": "input",+ "description": "Precision enable input. Used to control regulator start-up and shutdown; VEN threshold typ 1.6 V (falling), hysteresis ~0.6 V. Absolute max -0.5 V to 6 V; input current ~6 \u00b5A at 0 V."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground input to regulator; system common. Should be tied to the exposed pad and the board ground plane."+ },+ {+ "number": "7",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply to the regulator. Operating range 4.5 V to 42 V (abs max 43 V to GND). Bypass with a low-ESR ceramic capacitor placed close to the pin."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "power_out",+ "description": "Switching output of the regulator. Connects to the external inductor and catch diode of the buck power stage. SW to GND DC rating -5 V to VIN (transient -10 V for \u226450 ns)."+ },+ {+ "number": "EP",+ "name": "EP",+ "type": "power_in",+ "description": "Exposed thermal pad on the underside of the SO PowerPAD package. Must be connected to ground and to a copper pour on the PCB for thermal dissipation (\u03b8JA \u2248 60 \u00b0C/W with 1 sq inch of copper)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lm22676mrx-adj.pdf",+ "pages": 27,+ "sha256": "d53171b6eff70605",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-8-EP",+ "Category": "PMIC",+ "Pins": "9"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "lm22676mrx-adj"+ ],+ "discovery_pitch": "LM22676MRX-ADJ (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +144,5 @@ "docs/lm22676mrx-adj-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }