component
LM22672QMR-ADJ
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# LM22672QMR-ADJ++**Texas Instruments** · DC-DC Converters · SO-8++LM22672QMR-ADJ from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT | input | Bootstrap input that provides the gate voltage for the high-side NFET; BOOT pin voltage is limited to VSW + 7 V. |+| 2 | SS | input | Soft-start input used to increase the soft-start time; SS pin voltage is limited to -0.5 V to 7 V. |+| 3 | RT/SYNC | input | Oscillator mode control input used to set the switching frequency (200 kHz to 1 MHz via a single resistor) or to synchronize the internal oscillator to a system clock. |+| 4 | FB | input | Feedback input to the regulator; FB pin voltage is limited to -0.5 V to 7 V. |+| 5 | EN | input | Precision enable input that controls regulator start-up and shutdown and system power sequencing; EN pin voltage is limited to -0.5 V to 6 V. |+| 6 | GND | power_in | System ground pin for the regulator and the common reference for all other pins. |+| 7 | VIN | power_in | Supply input to the regulator; recommended VIN is 4.5 V to 42 V, with an absolute maximum of 43 V to GND. |+| 8 | SW | output | Switching output of the regulator; SW to GND is limited to -5 V DC (extended to -10 V for pulses up to 50 ns) and to VIN. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SO-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `LM22672QMR-ADJ`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8 (KiCad packages3D, STEP)+- 3D model files: `lm22672qmr-adj-etched.step` / `lm22672qmr-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm22672qmr-adj.step` / `lm22672qmr-adj.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm22672-q1) (34 pp, sha256 `85a2f805d6fb9630`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm22672qmr-adj-datasheet.pdf)
page.jsonadded+198@@ -0,0 +1,198 @@+{+ "slug": "lm22672qmr-adj",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm22672qmr-adj",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm22672qmr-adj.kicad_sym",+ "lm22672qmr-adj.kicad_mod",+ "lm22672qmr-adj.glb",+ "lm22672qmr-adj.step",+ "lm22672qmr-adj.lbr",+ "docs/hero.png",+ "docs/lm22672qmr-adj-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lm22672qmr-adj-hero.glb",+ "lm22672qmr-adj-hero.overlay.json"+ ],+ "component": {+ "mpn": "LM22672QMR-ADJ",+ "manufacturer": "Texas Instruments",+ "package": "SO-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm22672-q1",+ "parts": {+ "symbol": "lm22672qmr-adj.kicad_sym",+ "footprint": "lm22672qmr-adj.kicad_mod",+ "model_3d": "lm22672qmr-adj-hero.glb",+ "model_3d_plain": "lm22672qmr-adj.glb",+ "model_3d_step": "lm22672qmr-adj-etched.step",+ "model_3d_step_plain": "lm22672qmr-adj.step",+ "lbr": "lm22672qmr-adj.lbr"+ },+ "distributor_links": {+ "lcsc": "C1356194"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T14:34:27Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "BOOT",+ "type": "input",+ "description": "Bootstrap input that provides the gate voltage for the high-side NFET; BOOT pin voltage is limited to VSW + 7 V."+ },+ {+ "number": "2",+ "name": "SS",+ "type": "input",+ "description": "Soft-start input used to increase the soft-start time; SS pin voltage is limited to -0.5 V to 7 V."+ },+ {+ "number": "3",+ "name": "RT/SYNC",+ "type": "input",+ "description": "Oscillator mode control input used to set the switching frequency (200 kHz to 1 MHz via a single resistor) or to synchronize the internal oscillator to a system clock."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback input to the regulator; FB pin voltage is limited to -0.5 V to 7 V."+ },+ {+ "number": "5",+ "name": "EN",+ "type": "input",+ "description": "Precision enable input that controls regulator start-up and shutdown and system power sequencing; EN pin voltage is limited to -0.5 V to 6 V."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "System ground pin for the regulator and the common reference for all other pins."+ },+ {+ "number": "7",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input to the regulator; recommended VIN is 4.5 V to 42 V, with an absolute maximum of 43 V to GND."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "output",+ "description": "Switching output of the regulator; SW to GND is limited to -5 V DC (extended to -10 V for pulses up to 50 ns) and to VIN."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed pad is labelled 'EP' in the datasheet pin table and has no numeric pin number; it is inc; The datasheet lists VIN as type 'I' and GND with no type ('—'). Types were set to power_in per the K; Pin limits in the descriptions come from the Absolute Maximum Ratings table on page 4, not page 3 wh",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0595,+ "at": "2026-10-08T14:34:12"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm22672-q1",+ "pages": 34,+ "sha256": "85a2f805d6fb9630",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lm22672qmr-adj.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm22672qmr-adj-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "dc051b8b3ce3868382205f57b80ef0baeead08d9f667a43814e8d32b5f3e5622",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}