← Commit history
lm219dt: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+111−1
page.json+111−1@@ -33,5 +33,115 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LM219DT",+ "manufacturer": "STMicroelectronics",+ "package": "SOIC-14",+ "pin_count": 14,+ "category": "Comparators",+ "datasheet": "https://www.st.com/resource/en/datasheet/lm219dt.pdf",+ "parts": {+ "symbol": "lm219dt.kicad_sym",+ "footprint": "lm219dt.kicad_mod",+ "model_3d": "lm219dt-etched.glb",+ "model_3d_plain": "lm219dt.glb",+ "model_3d_step": "lm219dt-etched.step",+ "model_3d_step_plain": "lm219dt.step",+ "lbr": "lm219dt.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to a nearby quiet net; do not use as a routing via."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to a nearby quiet net; do not use as a routing via."+ },+ {+ "number": "3",+ "name": "GND1",+ "type": "power_in",+ "description": "Ground return for comparator 1. Separate from GND2 so channel 1's inputs and open-collector output can be referenced to an isolated ground."+ },+ {+ "number": "4",+ "name": "-IN1",+ "type": "input",+ "description": "Inverting input of comparator 1. Analog input; input bias current 500 nA typ (1 µA max over temp), differential input voltage rated ±5 V, common-mode range typically ±13 V at VCC=±15 V."+ },+ {+ "number": "5",+ "name": "+IN1",+ "type": "input",+ "description": "Non-inverting input of comparator 1. Analog input; input bias current 500 nA typ (1 µA max over temp), differential input voltage rated ±5 V, common-mode range typically ±13 V at VCC=±15 V."+ },+ {+ "number": "6",+ "name": "VCC-",+ "type": "power_in",+ "description": "Negative supply rail. Tie to 0 V for single-supply operation from +5 V, or down to -15 V for dual-supply operation. Absolute max -25 V."+ },+ {+ "number": "7",+ "name": "OUT2",+ "type": "output",+ "description": "Comparator 2 output. Open-collector NPN referenced to GND2; requires an external pull-up to a rail up to +36 V above VCC-. Sink capability up to 25 mA (VOL ≤ 1.5 V at 25 mA, ≤ 0.4 V at 3.2 mA); TTL-compatible."+ },+ {+ "number": "8",+ "name": "GND2",+ "type": "power_in",+ "description": "Ground return for comparator 2. Separate from GND1 so channel 2's inputs and open-collector output can be referenced to an isolated ground."+ },+ {+ "number": "9",+ "name": "+IN2",+ "type": "input",+ "description": "Non-inverting input of comparator 2. Analog input; input bias current 500 nA typ (1 µA max over temp), differential input voltage rated ±5 V, common-mode range typically ±13 V at VCC=±15 V."+ },+ {+ "number": "10",+ "name": "-IN2",+ "type": "input",+ "description": "Inverting input of comparator 2. Analog input; input bias current 500 nA typ (1 µA max over temp), differential input voltage rated ±5 V, common-mode range typically ±13 V at VCC=±15 V."+ },+ {+ "number": "11",+ "name": "VCC+",+ "type": "power_in",+ "description": "Positive supply rail. Range +5 V (single supply, with VCC- = 0 V) up to +15 V (dual supply). Absolute max +18 V. Positive supply current 8 mA typ / 11.5 mA max at ±15 V."+ },+ {+ "number": "12",+ "name": "OUT1",+ "type": "output",+ "description": "Comparator 1 output. Open-collector NPN referenced to GND1; requires an external pull-up to a rail up to +36 V above VCC-. Sink capability up to 25 mA (VOL ≤ 1.5 V at 25 mA, ≤ 0.4 V at 3.2 mA); TTL-compatible."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to a nearby quiet net; do not use as a routing via."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to a nearby quiet net; do not use as a routing via."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}