← Commit history

lm21215amhx-1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·63ad30421b · ·parent 7967aef
2 files changed +90−10
package.json+48−8
@@ -71,13 +71,13 @@         "number": "2",         "name": "SS/TRK",         "type": "input",-        "description": "Soft-start and tracking control input charged by internal 1.9 \u00b5A source (typical) to set output voltage ramp rate."+        "description": "Soft-start and tracking control input charged by internal 1.9 µA source (typical) to set output voltage ramp rate."       },       {         "number": "3",         "name": "EN",         "type": "input",-        "description": "Active high precision enable input with 1.35 V rising threshold, 2 \u00b5A internal pullup current."+        "description": "Active high precision enable input with 1.35 V rising threshold, 2 µA internal pullup current."       },       {         "number": "4",@@ -125,7 +125,7 @@         "number": "11",         "name": "SW",         "type": "output",-        "description": "Switch node output to filter inductor; tie pins 11-16 together locally, tolerate transient voltages \u00b10.3 V to VPVIN+0.3 V."+        "description": "Switch node output to filter inductor; tie pins 11-16 together locally, tolerate transient voltages ±0.3 V to VPVIN+0.3 V."       },       {         "number": "12",@@ -161,19 +161,19 @@         "number": "17",         "name": "PGOOD",         "type": "output",-        "description": "Open-drain power good indicator with 20 \u03a9 typical pulldown resistance; pulled low on OVP, UVP, or EN fault conditions."+        "description": "Open-drain power good indicator with 20 Ω typical pulldown resistance; pulled low on OVP, UVP, or EN fault conditions."       },       {         "number": "18",         "name": "COMP",         "type": "output",-        "description": "Error amplifier output for compensation network with 1 mA source current and 65 \u00b5A sink current."+        "description": "Error amplifier output for compensation network with 1 mA source current and 65 µA sink current."       },       {         "number": "19",         "name": "FB",         "type": "input",-        "description": "Feedback input to error amplifier inverting input regulated at 0.6 V nominal output voltage, \u00b11% accuracy."+        "description": "Feedback input to error amplifier inverting input regulated at 0.6 V nominal output voltage, ±1% accuracy."       },       {         "number": "20",@@ -220,6 +220,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm21215amhx-1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b113b687b9998e661ff3f9343f891ab91475826a50d3b525a32b4b14f3e3f79f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm21215amhx-1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2b3864e37c1302677714b7ee8ab20591ce335e915f8812003ea3febfabe1feb0",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -205,7 +205,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm21215amhx-1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b113b687b9998e661ff3f9343f891ab91475826a50d3b525a32b4b14f3e3f79f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm21215amhx-1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2b3864e37c1302677714b7ee8ab20591ce335e915f8812003ea3febfabe1feb0",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -252,4 +292,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}