← Commit history
Publish 0.1.1
4 files changed
+599−41
lm21215amhx-1-hero.glbadded⋯ 1 unchanged line ⋯
lm21215amhx-1-hero.overlay.jsonadded+537@@ -0,0 +1,537 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM21215AMHX-1",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 21,+ "span_mm": 9.2,+ "dash_mm": 0.23,+ "gap_mm": 0.138,+ "pad_stroke_mm": 0.0552+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 20,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.58,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.205,+ 3.205,+ -3.075,+ 3.075+ ],+ "pads_bbox_mm": [+ -3.625,+ 3.625,+ -3.125,+ 3.125+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lm21215amhx-1-etched.glb",+ "glb_sha256": "c921c65e16e80d66ca2f12ccd5a5840b0bdbb548f0f93c4c433f1b2a6eb0a500",+ "footprint": "lm21215amhx-1.kicad_mod",+ "footprint_sha256": "67d5d3fffa56b501ab023130eba99e0ca4408b552c9ea891778c8a79f13b6163",+ "pins": "page.json component.pins",+ "pins_sha256": "c537df4a96aff71704e7468826af8de9bace85130cc73369b6e41f48fdb0c46f"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "SYNC",+ "x": -4.32,+ "y": -2.925,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "SS/TRK",+ "x": -3.725,+ "y": -2.275,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "EN",+ "x": -3.725,+ "y": -1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "AVIN",+ "x": -3.725,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "PVIN",+ "x": -3.725,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "PVIN",+ "x": -3.725,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "PVIN",+ "x": -3.725,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "PGND",+ "x": -3.725,+ "y": 1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "PGND",+ "x": -3.725,+ "y": 2.275,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "PGND",+ "x": -3.725,+ "y": 2.925,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "SW",+ "x": 3.725,+ "y": 2.925,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "SW",+ "x": 3.725,+ "y": 2.275,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "13",+ "text": "SW",+ "x": 3.725,+ "y": 1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "14",+ "text": "SW",+ "x": 3.725,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "15",+ "text": "SW",+ "x": 3.725,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "16",+ "text": "SW",+ "x": 3.725,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "17",+ "text": "PGOOD",+ "x": 3.725,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "18",+ "text": "COMP",+ "x": 3.725,+ "y": -1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "19",+ "text": "FB",+ "x": 3.725,+ "y": -2.275,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "20",+ "text": "AGND",+ "x": 3.725,+ "y": -2.925,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -2.925+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -2.275+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -1.625+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -0.975+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ -0.325+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 0.325+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 0.975+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 1.625+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 2.275+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -2.8875,+ 2.925+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 2.925+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 2.275+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 1.625+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 0.975+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ 0.325+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -0.325+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -0.975+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -1.625+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -2.275+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ 2.8875,+ -2.925+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 2.15,+ 3.35+ ],+ "rot": 0.0+ }+ ]+}
package.json+53−35@@ -1,6 +1,6 @@ { "slug": "lm21215amhx-1",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -26,7 +26,10 @@ "docs/hero.png", "docs/lm21215amhx-1-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "lm21215amhx-1-etched.step",+ "lm21215amhx-1-hero.glb",+ "lm21215amhx-1-hero.overlay.json" ], "component": { "mpn": "LM21215AMHX-1",@@ -49,7 +52,7 @@ "lcsc": "C544603" }, "distributor_check": {- "checked_at": "2026-10-01T17:51:36Z",+ "checked_at": "2026-10-01T18:16:18Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -65,121 +68,121 @@ "number": "1", "name": "SYNC", "type": "input",- "description": "Frequency synchronization input; 300 kHz to 1.5 MHz clock range forces device switching at clock frequency."+ "description": "Frequency synchronization input pin; applying clock signal forces device switching at clock frequency, defaults to 500 kHz if unconnected." }, { "number": "2", "name": "SS/TRK", "type": "input",- "description": "Soft-start and tracking control input charged by internal 1.9 µA source (typical) to set output voltage ramp rate."+ "description": "Soft-start/tracking control pin with internal 2-µA current source charging external capacitor to set output voltage ramp rate during startup." }, { "number": "3", "name": "EN", "type": "input",- "description": "Active high precision enable input with 1.35 V rising threshold, 2 µA internal pullup current."+ "description": "Active high precision enable input; can be left open, where internal pullup current source pulls it high." }, { "number": "4", "name": "AVIN", "type": "power_in",- "description": "Analog input voltage supply for internal bias; 2.95 V to 5.5 V operating range, 2.7 V UVLO threshold."+ "description": "Analog input voltage supply generating internal bias; connect PVIN to AVIN through low pass RC filter to minimize input rail ripple and noise." }, { "number": "5", "name": "PVIN", "type": "power_in",- "description": "Input voltage to power switches; 2.95 V to 5.5 V operating range, connect pins together, tolerate 6.5 V transient for 6 ns."+ "description": "Input voltage to power switches; connect all PVIN pins together at device and locate low ESR input capacitor as close as possible." }, { "number": "6", "name": "PVIN", "type": "power_in",- "description": "Input voltage to power switches; 2.95 V to 5.5 V operating range, connect pins together, locate low ESR input capacitors close by."+ "description": "Input voltage to power switches; connect all PVIN pins together at device and locate low ESR input capacitor as close as possible." }, { "number": "7", "name": "PVIN", "type": "power_in",- "description": "Input voltage to power switches; 2.95 V to 5.5 V operating range, connect pins together at device."+ "description": "Input voltage to power switches; connect all PVIN pins together at device and locate low ESR input capacitor as close as possible." }, { "number": "8", "name": "PGND", "type": "power_in",- "description": "Power ground return for internal power switches; connect to PC board ground plane."+ "description": "Power ground pins for internal power switches." }, { "number": "9", "name": "PGND", "type": "power_in",- "description": "Power ground return for internal power switches; connect to PC board ground plane."+ "description": "Power ground pins for internal power switches." }, { "number": "10", "name": "PGND", "type": "power_in",- "description": "Power ground return for internal power switches; connect to PC board ground plane."+ "description": "Power ground pins for internal power switches." }, { "number": "11", "name": "SW", "type": "output",- "description": "Switch node output to filter inductor; tie pins 11-16 together locally, tolerate transient voltages ±0.3 V to VPVIN+0.3 V."+ "description": "Switch node pins tied together locally and connected to filter inductor output." }, { "number": "12", "name": "SW", "type": "output",- "description": "Switch node output to filter inductor; tie pins 11-16 together locally."+ "description": "Switch node pins tied together locally and connected to filter inductor output." }, { "number": "13", "name": "SW", "type": "output",- "description": "Switch node output to filter inductor; tie pins 11-16 together locally."+ "description": "Switch node pins tied together locally and connected to filter inductor output." }, { "number": "14", "name": "SW", "type": "output",- "description": "Switch node output to filter inductor; tie pins 11-16 together locally."+ "description": "Switch node pins tied together locally and connected to filter inductor output." }, { "number": "15", "name": "SW", "type": "output",- "description": "Switch node output to filter inductor; tie pins 11-16 together locally."+ "description": "Switch node pins tied together locally and connected to filter inductor output." }, { "number": "16", "name": "SW", "type": "output",- "description": "Switch node output to filter inductor; tie pins 11-16 together locally."+ "description": "Switch node pins tied together locally and connected to filter inductor output." }, { "number": "17", "name": "PGOOD",- "type": "output",- "description": "Open-drain power good indicator with 20 Ω typical pulldown resistance; pulled low on OVP, UVP, or EN fault conditions."+ "type": "tri_state",+ "description": "Open-drain power good indicator output." }, { "number": "18", "name": "COMP", "type": "output",- "description": "Error amplifier output for compensation network with 1 mA source current and 65 µA sink current."+ "description": "Compensation pin connected to output of voltage loop error amplifier." }, { "number": "19", "name": "FB", "type": "input",- "description": "Feedback input to error amplifier inverting input regulated at 0.6 V nominal output voltage, ±1% accuracy."+ "description": "Feedback pin connected to inverting input of voltage loop error amplifier." }, { "number": "20", "name": "AGND", "type": "power_in",- "description": "Quiet analog ground for internal reference and bias circuitry; keep traces away from switching noise."+ "description": "Quiet analog ground for internal reference and bias circuitry." }, { "number": "21",@@ -189,19 +192,19 @@ } ], "provenance": {- "extractor": "extract_pins 0.2",+ "extractor": "extract_pins 0.3", "factory_chain": { "factory": "2.0.0",- "extractor": "extract_pins 0.2",+ "extractor": "extract_pins 0.3", "primary_model": "claude-haiku-4-5-20251001", "primary_mode": "text",- "consensus_model": "claude-sonnet-4-6",+ "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [],- "pages_sent": 41,- "cost_usd": 0.3464,- "at": "2026-10-01T17:51:13"+ "pages_sent": 8,+ "cost_usd": 0.2325,+ "at": "2026-10-01T18:16:10" }, "datasheet": { "url": "https://www.ti.com/cn/lit/gpn/lm21215a",@@ -234,8 +237,8 @@ 6.5, 1.2 ],- "zmin_mm": 0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "b113b687b9998e661ff3f9343f891ab91475826a50d3b525a32b4b14f3e3f79f", "checked": "2026-10-07",@@ -253,13 +256,28 @@ 6.5, 1.2 ],- "zmin_mm": 0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "98eb0548808416223cb5fbbe9e3419008461f7cfad62ec2eca6c69b9246c8432", "checked": "2026-10-16", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }+ },+ "title": "LM21215AMHX-1",+ "brief": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "HTSSOP-20-EP",+ "Category": "Power Management (PMIC)",+ "Pins": "21"+ }+ },+ "discovery_triggers": [+ "lm21215amhx-1"+ ],+ "discovery_pitch": "LM21215AMHX-1 (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",+ "visibility": "public" }
page.json+9−6@@ -4,7 +4,7 @@ "slug": "lm21215amhx-1", "title": "LM21215AMHX-1", "brief": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -286,9 +286,12 @@ "docs/hero.png", "docs/lm21215amhx-1-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "lm21215amhx-1-etched.step",+ "lm21215amhx-1-hero.glb",+ "lm21215amhx-1-hero.overlay.json" ],- "visibility": {- "public": true- }-}+ "visibility": "public",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom"+}