component
LM20242MHX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -50,7 +50,7 @@ "number": "1", "name": "SS/TRK", "type": "input",- "description": "Soft-start or tracking control input charged by internal 5 \u00b5A source; defaults to 1 ms internal ramp if open or tracks external voltage source."+ "description": "Soft-start or tracking control input charged by internal 5 µA source; defaults to 1 ms internal ramp if open or tracks external voltage source." }, { "number": "2",@@ -62,7 +62,7 @@ "number": "3", "name": "PGOOD", "type": "tri_state",- "description": "Open drain power good output indicating output voltage is regulating within 93% to 97% of target with 20 \u00b5s deglitch delay."+ "description": "Open drain power good output indicating output voltage is regulating within 93% to 97% of target with 20 µs deglitch delay." }, { "number": "4",@@ -152,19 +152,19 @@ "number": "18", "name": "VCC", "type": "power_out",- "description": "Regulated output set to 5.5V nominal for VIN above 7.2V and tracking VIN below 7.2V; requires 0.1 \u00b5F to 1 \u00b5F ceramic bypass capacitor."+ "description": "Regulated output set to 5.5V nominal for VIN above 7.2V and tracking VIN below 7.2V; requires 0.1 µF to 1 µF ceramic bypass capacitor." }, { "number": "19", "name": "EN", "type": "input",- "description": "Enable or UVLO input with rising threshold 1.25V typical and 50 mV hysteresis; 2 \u00b5A pull-up enables device if pin left unconnected."+ "description": "Enable or UVLO input with rising threshold 1.25V typical and 50 mV hysteresis; 2 µA pull-up enables device if pin left unconnected." }, { "number": "20", "name": "RT", "type": "input",- "description": "Oscillator frequency adjust input; external resistor to AGND sets switching frequency from 100 kHz to 1 MHz per equation fSW = (82000/RRT \u2212 56) kHz."+ "description": "Oscillator frequency adjust input; external resistor to AGND sets switching frequency from 100 kHz to 1 MHz per equation fSW = (82000/RRT − 56) kHz." }, { "number": "21",@@ -248,5 +248,8 @@ "docs/lm20242mhx-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }