← Commit history
lm13700m: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+122−1
page.json+122−1@@ -33,5 +33,126 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LM13700M",+ "manufacturer": "HGSEMI",+ "package": "SOP-16",+ "pin_count": 16,+ "category": "Operational Amplifier",+ "parts": {+ "symbol": "lm13700m.kicad_sym",+ "footprint": "lm13700m.kicad_mod",+ "model_3d": "lm13700m-etched.glb",+ "model_3d_plain": "lm13700m.glb",+ "model_3d_step": "lm13700m-etched.step",+ "model_3d_step_plain": "lm13700m.step",+ "lbr": "lm13700m.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "Amp Bias Input A",+ "type": "input",+ "description": "Amplifier bias current (IABC) input for channel A. Sets the transconductance gm of amplifier A; typical operating range is a few µA up to 500 µA, absolute max 2 mA. Internally sits two Vbe above V-."+ },+ {+ "number": "2",+ "name": "Diode Bias A",+ "type": "input",+ "description": "Linearizing diode bias current input for channel A. Supplying a bias current (typ. 1 mA, max 2 mA) through the internal input diodes reduces distortion and extends usable differential input voltage range. Leave floating if diode linearization is not used."+ },+ {+ "number": "3",+ "name": "Input+ A",+ "type": "input",+ "description": "Non-inverting differential input of amplifier A. Max differential input voltage ±5 V; input common-mode range typ. ±13.5 V with ±15 V supplies."+ },+ {+ "number": "4",+ "name": "Input- A",+ "type": "input",+ "description": "Inverting differential input of amplifier A. Max differential input voltage ±5 V; input impedance typ. 26 kΩ."+ },+ {+ "number": "5",+ "name": "Output A",+ "type": "output",+ "description": "Unbuffered current output of transconductance amplifier A. Output current is IABC * tanh(Vin*q/2kT); peak output current tracks IABC (typ. 500 µA at IABC=500 µA). Continuous short-circuit to ground is allowed."+ },+ {+ "number": "6",+ "name": "V-",+ "type": "power_in",+ "description": "Negative supply rail. Single-supply operation 9.5 V to 32 V; split-supply operation -4.75 V to -16 V (absolute max ±18 V, 36 V total). Shared by both amplifier channels."+ },+ {+ "number": "7",+ "name": "Buffer Input A",+ "type": "input",+ "description": "High-impedance input of Darlington output buffer for channel A. Typical input bias current 0.5 µA; independent of IABC, unlike the LM13600."+ },+ {+ "number": "8",+ "name": "Buffer Output A",+ "type": "output",+ "description": "Emitter-follower Darlington buffer output for channel A. Drives up to 20 mA; peak output voltage swing typ. 10 V. Requires an external pull-down resistor to V-."+ },+ {+ "number": "9",+ "name": "Buffer Output B",+ "type": "output",+ "description": "Emitter-follower Darlington buffer output for channel B. Drives up to 20 mA; peak output voltage swing typ. 10 V. Requires an external pull-down resistor to V-."+ },+ {+ "number": "10",+ "name": "Buffer Input B",+ "type": "input",+ "description": "High-impedance input of Darlington output buffer for channel B. Typical input bias current 0.5 µA; independent of IABC."+ },+ {+ "number": "11",+ "name": "V+",+ "type": "power_in",+ "description": "Positive supply rail. Single-supply operation 9.5 V to 32 V; split-supply operation +4.75 V to +16 V (absolute max ±18 V, 36 V total). Shared by both amplifier channels."+ },+ {+ "number": "12",+ "name": "Output B",+ "type": "output",+ "description": "Unbuffered current output of transconductance amplifier B. Output current tracks IABC; peak output current typ. 500 µA at IABC=500 µA. Continuous short-circuit to ground is allowed."+ },+ {+ "number": "13",+ "name": "Input- B",+ "type": "input",+ "description": "Inverting differential input of amplifier B. Max differential input voltage ±5 V; input impedance typ. 26 kΩ."+ },+ {+ "number": "14",+ "name": "Input+ B",+ "type": "input",+ "description": "Non-inverting differential input of amplifier B. Max differential input voltage ±5 V; input common-mode range typ. ±13.5 V with ±15 V supplies."+ },+ {+ "number": "15",+ "name": "Diode Bias B",+ "type": "input",+ "description": "Linearizing diode bias current input for channel B. Supplying a bias current (typ. 1 mA, max 2 mA) through the internal input diodes reduces distortion. Leave floating if diode linearization is not used."+ },+ {+ "number": "16",+ "name": "Amp Bias Input B",+ "type": "input",+ "description": "Amplifier bias current (IABC) input for channel B. Sets the transconductance gm of amplifier B; typical operating range is a few µA up to 500 µA, absolute max 2 mA."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}