← Commit history

Initial commit: component/lks32mc083c8t8

Ray ·7c56ed38b8 ·
2 files changed +141
README.mdadded+107
@@ -0,0 +1,107 @@+# LKS32MC083C8T8++**LINKOSEMI** · Microcontrollers (MCU/MPU/SOC) · TQFP-48(7x7)++LKS32MC083C8T8 from LINKOSEMI, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ADC_CH4/DAC_OUT/P0.0 | bidirectional | GPIO P0.0 muxed with ADC channel 4 input and 12-bit DAC output. Internal software-enabled 10 kΩ pull-up to AVDD. |+| 2 | RSTN/P0.2 | bidirectional | System reset input (active low) by default, alternately GPIO P0.2. Internal 100 kΩ pull-up to AVDD fixed on; external 10 nF-100 nF cap to GND recommended, with optional 10-20 kΩ external pull-up. |+| 3 | AVSS | power_in | System analog/digital ground return. |+| 4 | AVDD | power_in | Main chip power input, 2.2-5.5 V (B revision 3.0-5.5 V). External decoupling cap ≥1 µF recommended, placed close to AVDD. |+| 5 | P3.2 | bidirectional | General-purpose I/O P3.2. |+| 6 | SCL/TIM2_CH0/ADC_CH7/P0.3 | bidirectional | GPIO P0.3 muxed with I2C SCL, Timer2 channel 0, and ADC channel 7. |+| 7 | SDA/TIM2_CH1/ADC_CH8/P0.4 | bidirectional | GPIO P0.4 muxed with I2C SDA, Timer2 channel 1, and ADC channel 8. |+| 8 | ADC_CH9/P0.5 | bidirectional | GPIO P0.5 muxed with ADC channel 9. |+| 9 | UART1_TX(RX)/TIM1_CH0/CAN_RX/P0.6 | bidirectional | GPIO P0.6 muxed with UART1 TX or RX (swappable), Timer1 channel 0, and CAN RX. Internal software-enabled 10 kΩ pull-up. |+| 10 | UART1_TX(RX)/TIM1_CH1/CAN_TX/P0.7 | bidirectional | GPIO P0.7 muxed with UART1 TX or RX, Timer1 channel 1, and CAN TX. Internal software-enabled 10 kΩ pull-up. |+| 11 | MCPWM_CH1P/TIM2_CH0/P2.11 | bidirectional | Motor-control PWM channel 1 high-side output, muxed with Timer2 channel 0 and GPIO P2.11. |+| 12 | MCPWM_CH1N/TIM2_CH1/ADC_TRIG2/P2.12 | bidirectional | Motor-control PWM channel 1 low-side output, Timer2 channel 1, ADC trigger 2 and GPIO P2.12. |+| 13 | HALL_IN0/TIM3_CH0/ADC_CH15/CMP0_IP1/P0.11 | bidirectional | Hall-sensor phase A input; muxed with Timer3 channel 0, ADC channel 15, comparator 0 non-inverting input 1, and GPIO P0.11. Wake source. |+| 14 | HALL_IN1/TIM3_CH1/CAN_RX/ADC_CH16/CMP0_IP2/P0.12 | bidirectional | Hall-sensor phase B input; muxed with Timer3 channel 1, CAN RX, ADC channel 16, comparator 0 non-inverting input 2, and GPIO P0.12. |+| 15 | HALL_IN2/CAN_TX/ADC_CH17/CMP0_IP3/P0.13 | bidirectional | Hall-sensor phase C input; muxed with CAN TX, ADC channel 17, comparator 0 non-inverting input 3, and GPIO P0.13. |+| 16 | CMP0_OUT/MCPWM_BKIN1/SPI_CLK/TIM0_CH1/ADC_TRIG0/SIF/ADC_CH10/CMP0_IP4/P0.14 | bidirectional | Highly muxed pin: comparator 0 output, MCPWM brake-input 1, SPI clock, Timer0 channel 1, ADC trigger 0, single-wire/SIF interface, ADC channel 10, comparator 0 non-inverting input 4, GPIO P0.14. |+| 17 | MCPWM_CH0P/UART0_TX(RX)/SPI_DI(DO)/TIM0_CH0/ADC_TRIG1/CMP0_IN/P0.15 | bidirectional | MCPWM channel 0 high-side, UART0 TX/RX, SPI DI/DO, Timer0 channel 0, ADC trigger 1, comparator 0 inverting input, GPIO P0.15. |+| 18 | MCPWM_CH0N/UART0_TX(RX)/SPI_DI(DO)/P1.0 | bidirectional | MCPWM channel 0 low-side, UART0 TX/RX, SPI DI/DO, GPIO P1.0. Internal software-enabled 10 kΩ pull-up. |+| 19 | TIM3_CH1/ADC_CH5/P1.3 | bidirectional | Timer3 channel 1, ADC channel 5, GPIO P1.3. Internal software-enabled 10 kΩ pull-up. |+| 20 | OPA0_IP/P3.5 | bidirectional | Op-amp 0 non-inverting input, GPIO P3.5. |+| 21 | OPA0_IN/P3.7 | bidirectional | Op-amp 0 inverting input, GPIO P3.7. |+| 22 | ADC_CH11/OPAx_OUT/LDO15/P2.7 | bidirectional | ADC channel 11 / any-OPA output / internal 1.5 V LDO output tap / GPIO P2.7. Internal software-enabled 10 kΩ pull-up. |+| 23 | OPA1_IP/P3.0 | bidirectional | Op-amp 1 non-inverting input, GPIO P3.0. |+| 24 | OPA1_IN/P3.1 | bidirectional | Op-amp 1 inverting input, GPIO P3.1. |+| 25 | UART1_TX(RX)/TIM3_CH0/OSC_IN/P2.8 | bidirectional | UART1 TX/RX, Timer3 channel 0, 4 MHz crystal input, GPIO P2.8. Internal software-enabled 10 kΩ pull-up. When used with a crystal, add a ~15 pF cap to GND. |+| 26 | UART1_TX(RX)/TIM3_CH1/OSC_OUT/P3.9 | bidirectional | UART1 TX/RX, Timer3 channel 1, crystal output, GPIO P3.9. Internal software-enabled 10 kΩ pull-up. When used with a crystal, add a ~15 pF cap to GND. |+| 27 | LRC/MCPWM_CH0P/P1.4 | bidirectional | 32 kHz low-speed RC clock output, MCPWM channel 0 high-side, GPIO P1.4. |+| 28 | HRC/MCPWM_CH0N/P1.5 | bidirectional | 4 MHz high-speed RC clock output, MCPWM channel 0 low-side, GPIO P1.5. |+| 29 | MCPWM_CH1P/P1.6 | bidirectional | MCPWM channel 1 high-side output, GPIO P1.6. |+| 30 | MCPWM_CH1N/P1.7 | bidirectional | MCPWM channel 1 low-side output, GPIO P1.7. |+| 31 | MCPWM_CH2P/P1.8 | bidirectional | MCPWM channel 2 high-side output, GPIO P1.8. |+| 32 | MCPWM_CH2N/P1.9 | bidirectional | MCPWM channel 2 low-side output, GPIO P1.9. |+| 33 | ADC_CH13/MCPWM_CH3P/UART0_TX(RX)/SCL/TIM0_CH0/ADC_TRIG2/P1.10 | bidirectional | ADC channel 13, MCPWM channel 3 high-side, UART0 TX/RX, I2C SCL, Timer0 channel 0, ADC trigger 2, GPIO P1.10. Internal software-enabled 10 kΩ pull-up. |+| 34 | MCPWM_CH3N/UART0_TX(RX)/SDA/TIM0_CH1/ADC_TRIG3/SIF/P1.11 | bidirectional | MCPWM channel 3 low-side, UART0 TX/RX, I2C SDA, Timer0 channel 1, ADC trigger 3, SIF, GPIO P1.11. Internal software-enabled 10 kΩ pull-up. |+| 35 | OPA2_IP/P3.10 | bidirectional | Op-amp 2 non-inverting input, GPIO P3.10. |+| 36 | OPA2_IN/P3.11 | bidirectional | Op-amp 2 inverting input, GPIO P3.11. |+| 37 | SPI_DI(DO)/SCL/ADC_CH12/CMP0_IP0/P2.9 | bidirectional | SPI data-in or data-out (swappable), I2C SCL, ADC channel 12, comparator 0 non-inverting input 0, GPIO P2.9. |+| 38 | SPI_DI(DO)/SDA/P2.10 | bidirectional | SPI data-in or data-out (swappable), I2C SDA, GPIO P2.10. Internal software-enabled 10 kΩ pull-up. |+| 39 | OPA3_IN/P3.14 | bidirectional | Op-amp 3 inverting input, GPIO P3.14. |+| 40 | OPA3_IP/P3.15 | bidirectional | Op-amp 3 non-inverting input, GPIO P3.15. |+| 41 | SPI_CLK/ADC_CH14/CMP1_IP0/P2.1 | bidirectional | SPI clock, ADC channel 14, comparator 1 non-inverting input 0, GPIO P2.1. Internal software-enabled 10 kΩ pull-up. |+| 42 | CMP1_IN/P2.2 | bidirectional | Comparator 1 inverting input, GPIO P2.2. |+| 43 | CMP1_OUT/MCPWM_BKIN0/SPI_CS/REF/P2.3 | bidirectional | Comparator 1 output, MCPWM brake-input 0, SPI chip-select, voltage reference, GPIO P2.3. |+| 44 | HALL_IN0/CAN_RX/MCPWM_CH2P/UART1_TX(RX)/TIM1_CH0/ADC_TRIG3/CMP1_IP1/P2.4 | bidirectional | Hall phase A input, CAN RX, MCPWM channel 2 high-side, UART1 TX/RX, Timer1 channel 0, ADC trigger 3, comparator 1 non-inverting input 1, GPIO P2.4. Internal software-enabled 10 kΩ pull-up. |+| 45 | HALL_IN1/CAN_TX/MCPWM_CH2N/UART1_TX(RX)/TIM1_CH1/ADC_TRIG0/CMP1_IP2/P2.5 | bidirectional | Hall phase B input, CAN TX, MCPWM channel 2 low-side, UART1 TX/RX, Timer1 channel 1, ADC trigger 0, comparator 1 non-inverting input 2, GPIO P2.5. Internal software-enabled 10 kΩ pull-up. |+| 46 | HALL_IN2/MCPWM_CH3P/TIM3_CH0/ADC_TRIG1/CMP1_IP3/P2.6 | bidirectional | Hall phase C input, MCPWM channel 3 high-side, Timer3 channel 0, ADC trigger 1, comparator 1 non-inverting input 3, GPIO P2.6. Internal software-enabled 10 kΩ pull-up. |+| 47 | SWCLK | input | Serial-wire debug clock input. Fixed internal 10 kΩ pull-up. |+| 48 | SWDIO | bidirectional | Serial-wire debug data I/O. Fixed internal 10 kΩ pull-up. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LINKOSEMI |+| Package | TQFP-48(7x7) |+| Category | MCU |+| Pins | 48 |++## Ordering variants++Same part, different packaging or reel option.++- `LKS32MC083C8T8`+- `LKS32MC083C8T8(B)`+- `LKS32MC081C8T8`+- `LKS32MC081C8T8(B)`+- `LKS32MC088C6T8`+- `LKS32MC088C6T8(B)`+- `LKS32MC080R8T8`+- `LKS32MC080R8T8(B)`+- `LKS32MC082K8Q8`+- `LKS32MC082K8Q8(B)`+- `LKS32MC084DF6Q8`+- `LKS32AT085C8Q9`+- `LKS32AT085C8Q9(B)`+- `LKS32MC087M6S8`+- `LKS32MC087AM6S8`+- `LKS32MC087CM6S8`+- `LKS32MC087DM6S8`+- `LKS32MC087EM6S8`++## CAD (KiCad official)++- Symbol: `LKS32MC083C8T8`+- Footprint: `Package_QFP:TQFP-48_7x7mm_P0.5mm`+- 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LINKOSEMI datasheet](docs/lks32mc083c8t8-datasheet.pdf) (60 pp, sha256 `184a8de0b09ebdcf`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lks32mc083c8t8-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lks32mc083c8t8",+  "version": "0.1.0",+  "type": "component",+  "description": "LINKOSEMI Microcontrollers (MCU/MPU/SOC), TQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "mcu",+    "lks32mc083c8t8"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lks32mc083c8t8.kicad_sym",+    "lks32mc083c8t8.kicad_mod",+    "lks32mc083c8t8.glb",+    "lks32mc083c8t8.step",+    "lks32mc083c8t8.lbr",+    "docs/hero.png",+    "docs/lks32mc083c8t8-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file