← Commit history

Set visibility: public

Ray ·21bf149350 · ·parent 1f8b645
1 file changed +23−20
page.json+23−20
@@ -32,13 +32,13 @@         "number": "1",         "name": "ADC_CH4/DAC_OUT/P0.0",         "type": "bidirectional",-        "description": "GPIO P0.0 muxed with ADC channel 4 input and 12-bit DAC output. Internal software-enabled 10 k\u03a9 pull-up to AVDD."+        "description": "GPIO P0.0 muxed with ADC channel 4 input and 12-bit DAC output. Internal software-enabled 10 kΩ pull-up to AVDD."       },       {         "number": "2",         "name": "RSTN/P0.2",         "type": "bidirectional",-        "description": "System reset input (active low) by default, alternately GPIO P0.2. Internal 100 k\u03a9 pull-up to AVDD fixed on; external 10 nF-100 nF cap to GND recommended, with optional 10-20 k\u03a9 external pull-up."+        "description": "System reset input (active low) by default, alternately GPIO P0.2. Internal 100 kΩ pull-up to AVDD fixed on; external 10 nF-100 nF cap to GND recommended, with optional 10-20 kΩ external pull-up."       },       {         "number": "3",@@ -50,7 +50,7 @@         "number": "4",         "name": "AVDD",         "type": "power_in",-        "description": "Main chip power input, 2.2-5.5 V (B revision 3.0-5.5 V). External decoupling cap \u22651 \u00b5F recommended, placed close to AVDD."+        "description": "Main chip power input, 2.2-5.5 V (B revision 3.0-5.5 V). External decoupling cap ≥1 µF recommended, placed close to AVDD."       },       {         "number": "5",@@ -80,13 +80,13 @@         "number": "9",         "name": "UART1_TX(RX)/TIM1_CH0/CAN_RX/P0.6",         "type": "bidirectional",-        "description": "GPIO P0.6 muxed with UART1 TX or RX (swappable), Timer1 channel 0, and CAN RX. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "GPIO P0.6 muxed with UART1 TX or RX (swappable), Timer1 channel 0, and CAN RX. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "10",         "name": "UART1_TX(RX)/TIM1_CH1/CAN_TX/P0.7",         "type": "bidirectional",-        "description": "GPIO P0.7 muxed with UART1 TX or RX, Timer1 channel 1, and CAN TX. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "GPIO P0.7 muxed with UART1 TX or RX, Timer1 channel 1, and CAN TX. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "11",@@ -134,13 +134,13 @@         "number": "18",         "name": "MCPWM_CH0N/UART0_TX(RX)/SPI_DI(DO)/P1.0",         "type": "bidirectional",-        "description": "MCPWM channel 0 low-side, UART0 TX/RX, SPI DI/DO, GPIO P1.0. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "MCPWM channel 0 low-side, UART0 TX/RX, SPI DI/DO, GPIO P1.0. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "19",         "name": "TIM3_CH1/ADC_CH5/P1.3",         "type": "bidirectional",-        "description": "Timer3 channel 1, ADC channel 5, GPIO P1.3. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "Timer3 channel 1, ADC channel 5, GPIO P1.3. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "20",@@ -158,7 +158,7 @@         "number": "22",         "name": "ADC_CH11/OPAx_OUT/LDO15/P2.7",         "type": "bidirectional",-        "description": "ADC channel 11 / any-OPA output / internal 1.5 V LDO output tap / GPIO P2.7. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "ADC channel 11 / any-OPA output / internal 1.5 V LDO output tap / GPIO P2.7. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "23",@@ -176,13 +176,13 @@         "number": "25",         "name": "UART1_TX(RX)/TIM3_CH0/OSC_IN/P2.8",         "type": "bidirectional",-        "description": "UART1 TX/RX, Timer3 channel 0, 4 MHz crystal input, GPIO P2.8. Internal software-enabled 10 k\u03a9 pull-up. When used with a crystal, add a ~15 pF cap to GND."+        "description": "UART1 TX/RX, Timer3 channel 0, 4 MHz crystal input, GPIO P2.8. Internal software-enabled 10 kΩ pull-up. When used with a crystal, add a ~15 pF cap to GND."       },       {         "number": "26",         "name": "UART1_TX(RX)/TIM3_CH1/OSC_OUT/P3.9",         "type": "bidirectional",-        "description": "UART1 TX/RX, Timer3 channel 1, crystal output, GPIO P3.9. Internal software-enabled 10 k\u03a9 pull-up. When used with a crystal, add a ~15 pF cap to GND."+        "description": "UART1 TX/RX, Timer3 channel 1, crystal output, GPIO P3.9. Internal software-enabled 10 kΩ pull-up. When used with a crystal, add a ~15 pF cap to GND."       },       {         "number": "27",@@ -224,13 +224,13 @@         "number": "33",         "name": "ADC_CH13/MCPWM_CH3P/UART0_TX(RX)/SCL/TIM0_CH0/ADC_TRIG2/P1.10",         "type": "bidirectional",-        "description": "ADC channel 13, MCPWM channel 3 high-side, UART0 TX/RX, I2C SCL, Timer0 channel 0, ADC trigger 2, GPIO P1.10. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "ADC channel 13, MCPWM channel 3 high-side, UART0 TX/RX, I2C SCL, Timer0 channel 0, ADC trigger 2, GPIO P1.10. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "34",         "name": "MCPWM_CH3N/UART0_TX(RX)/SDA/TIM0_CH1/ADC_TRIG3/SIF/P1.11",         "type": "bidirectional",-        "description": "MCPWM channel 3 low-side, UART0 TX/RX, I2C SDA, Timer0 channel 1, ADC trigger 3, SIF, GPIO P1.11. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "MCPWM channel 3 low-side, UART0 TX/RX, I2C SDA, Timer0 channel 1, ADC trigger 3, SIF, GPIO P1.11. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "35",@@ -254,7 +254,7 @@         "number": "38",         "name": "SPI_DI(DO)/SDA/P2.10",         "type": "bidirectional",-        "description": "SPI data-in or data-out (swappable), I2C SDA, GPIO P2.10. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "SPI data-in or data-out (swappable), I2C SDA, GPIO P2.10. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "39",@@ -272,7 +272,7 @@         "number": "41",         "name": "SPI_CLK/ADC_CH14/CMP1_IP0/P2.1",         "type": "bidirectional",-        "description": "SPI clock, ADC channel 14, comparator 1 non-inverting input 0, GPIO P2.1. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "SPI clock, ADC channel 14, comparator 1 non-inverting input 0, GPIO P2.1. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "42",@@ -290,31 +290,31 @@         "number": "44",         "name": "HALL_IN0/CAN_RX/MCPWM_CH2P/UART1_TX(RX)/TIM1_CH0/ADC_TRIG3/CMP1_IP1/P2.4",         "type": "bidirectional",-        "description": "Hall phase A input, CAN RX, MCPWM channel 2 high-side, UART1 TX/RX, Timer1 channel 0, ADC trigger 3, comparator 1 non-inverting input 1, GPIO P2.4. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "Hall phase A input, CAN RX, MCPWM channel 2 high-side, UART1 TX/RX, Timer1 channel 0, ADC trigger 3, comparator 1 non-inverting input 1, GPIO P2.4. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "45",         "name": "HALL_IN1/CAN_TX/MCPWM_CH2N/UART1_TX(RX)/TIM1_CH1/ADC_TRIG0/CMP1_IP2/P2.5",         "type": "bidirectional",-        "description": "Hall phase B input, CAN TX, MCPWM channel 2 low-side, UART1 TX/RX, Timer1 channel 1, ADC trigger 0, comparator 1 non-inverting input 2, GPIO P2.5. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "Hall phase B input, CAN TX, MCPWM channel 2 low-side, UART1 TX/RX, Timer1 channel 1, ADC trigger 0, comparator 1 non-inverting input 2, GPIO P2.5. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "46",         "name": "HALL_IN2/MCPWM_CH3P/TIM3_CH0/ADC_TRIG1/CMP1_IP3/P2.6",         "type": "bidirectional",-        "description": "Hall phase C input, MCPWM channel 3 high-side, Timer3 channel 0, ADC trigger 1, comparator 1 non-inverting input 3, GPIO P2.6. Internal software-enabled 10 k\u03a9 pull-up."+        "description": "Hall phase C input, MCPWM channel 3 high-side, Timer3 channel 0, ADC trigger 1, comparator 1 non-inverting input 3, GPIO P2.6. Internal software-enabled 10 kΩ pull-up."       },       {         "number": "47",         "name": "SWCLK",         "type": "input",-        "description": "Serial-wire debug clock input. Fixed internal 10 k\u03a9 pull-up."+        "description": "Serial-wire debug clock input. Fixed internal 10 kΩ pull-up."       },       {         "number": "48",         "name": "SWDIO",         "type": "bidirectional",-        "description": "Serial-wire debug data I/O. Fixed internal 10 k\u03a9 pull-up."+        "description": "Serial-wire debug data I/O. Fixed internal 10 kΩ pull-up."       }     ],     "provenance": {@@ -452,5 +452,8 @@     "docs/lks32mc083c8t8-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file