← Commit history
page.json+23−20@@ -32,13 +32,13 @@ "number": "1", "name": "ADC_CH4/DAC_OUT/P0.0", "type": "bidirectional",- "description": "GPIO P0.0 with ADC channel 4 input and 12-bit DAC output alternate functions. Software-enabled 10 k\u03a9 pull-up to AVDD available."+ "description": "GPIO P0.0 with ADC channel 4 input and 12-bit DAC output alternate functions. Software-enabled 10 kΩ pull-up to AVDD available." }, { "number": "2", "name": "RSTN/P0.2", "type": "bidirectional",- "description": "Active-low reset input (default function) or GPIO P0.2. Internal 100 k\u03a9 pull-up to AVDD, always enabled; datasheet recommends an external 10 nF-100 nF cap to ground and an optional external 10 k-20 k pull-up."+ "description": "Active-low reset input (default function) or GPIO P0.2. Internal 100 kΩ pull-up to AVDD, always enabled; datasheet recommends an external 10 nF-100 nF cap to ground and an optional external 10 k-20 k pull-up." }, { "number": "3",@@ -50,7 +50,7 @@ "number": "4", "name": "AVDD", "type": "power_in",- "description": "Chip main power supply input, 2.2-5.5 V (3.0-5.5 V on B silicon). Requires a \u22651 \u00b5F decoupling capacitor placed as close to the pin as possible."+ "description": "Chip main power supply input, 2.2-5.5 V (3.0-5.5 V on B silicon). Requires a ≥1 µF decoupling capacitor placed as close to the pin as possible." }, { "number": "5",@@ -80,13 +80,13 @@ "number": "9", "name": "UART1_TX(RX)/TIM1_CH0/P0.6", "type": "bidirectional",- "description": "UART1 TX or RX (direction chosen by GPIO_POE/PIE) / Timer1 channel 0 / GPIO P0.6. Software-enabled 10 k\u03a9 internal pull-up."+ "description": "UART1 TX or RX (direction chosen by GPIO_POE/PIE) / Timer1 channel 0 / GPIO P0.6. Software-enabled 10 kΩ internal pull-up." }, { "number": "10", "name": "UART1_TX(RX)/TIM1_CH1/P0.7", "type": "bidirectional",- "description": "UART1 TX or RX (direction chosen by GPIO_POE/PIE) / Timer1 channel 1 / GPIO P0.7. Software-enabled 10 k\u03a9 internal pull-up."+ "description": "UART1 TX or RX (direction chosen by GPIO_POE/PIE) / Timer1 channel 1 / GPIO P0.7. Software-enabled 10 kΩ internal pull-up." }, { "number": "11",@@ -134,13 +134,13 @@ "number": "18", "name": "MCPWM_CH0N/UART0_TX(RX)/SPI_DI(DO)/P1.0", "type": "bidirectional",- "description": "MCPWM channel 0 low-side / UART0 TX or RX / SPI DI or DO / GPIO P1.0. Software-enabled 10 k\u03a9 pull-up."+ "description": "MCPWM channel 0 low-side / UART0 TX or RX / SPI DI or DO / GPIO P1.0. Software-enabled 10 kΩ pull-up." }, { "number": "19", "name": "TIM3_CH1/ADC_CH5/P1.3", "type": "bidirectional",- "description": "Timer3 channel 1 / ADC channel 5 / GPIO P1.3. Software-enabled 10 k\u03a9 pull-up."+ "description": "Timer3 channel 1 / ADC channel 5 / GPIO P1.3. Software-enabled 10 kΩ pull-up." }, { "number": "20",@@ -158,7 +158,7 @@ "number": "22", "name": "ADC_CH11/OPAx_OUT/LDO15/P2.7", "type": "bidirectional",- "description": "ADC channel 11 / Op-amp x output / internal 1.5 V LDO output / GPIO P2.7. Software-enabled 10 k\u03a9 pull-up."+ "description": "ADC channel 11 / Op-amp x output / internal 1.5 V LDO output / GPIO P2.7. Software-enabled 10 kΩ pull-up." }, { "number": "23",@@ -176,13 +176,13 @@ "number": "25", "name": "UART1_TX(RX)/TIM3_CH0/OSC_IN/P2.8", "type": "bidirectional",- "description": "UART1 TX or RX / Timer3 channel 0 / external crystal oscillator input / GPIO P2.8. Software-enabled 10 k\u03a9 pull-up. If a crystal is attached, connect a ~15 pF cap to ground."+ "description": "UART1 TX or RX / Timer3 channel 0 / external crystal oscillator input / GPIO P2.8. Software-enabled 10 kΩ pull-up. If a crystal is attached, connect a ~15 pF cap to ground." }, { "number": "26", "name": "UART1_TX(RX)/TIM3_CH1/OSC_OUT/P3.9", "type": "bidirectional",- "description": "UART1 TX or RX / Timer3 channel 1 / external crystal oscillator output / GPIO P3.9. Software-enabled 10 k\u03a9 pull-up. If a crystal is attached, connect a ~15 pF cap to ground."+ "description": "UART1 TX or RX / Timer3 channel 1 / external crystal oscillator output / GPIO P3.9. Software-enabled 10 kΩ pull-up. If a crystal is attached, connect a ~15 pF cap to ground." }, { "number": "27",@@ -224,13 +224,13 @@ "number": "33", "name": "ADC_CH13/MCPWM_CH3P/UART0_TX(RX)/SCL/TIM0_CH0/ADC_TRIG2/P1.10", "type": "bidirectional",- "description": "ADC channel 13 / MCPWM channel 3 high-side / UART0 TX or RX / IIC SCL / Timer0 channel 0 / ADC trigger 2 / GPIO P1.10. Software-enabled 10 k\u03a9 pull-up."+ "description": "ADC channel 13 / MCPWM channel 3 high-side / UART0 TX or RX / IIC SCL / Timer0 channel 0 / ADC trigger 2 / GPIO P1.10. Software-enabled 10 kΩ pull-up." }, { "number": "34", "name": "MCPWM_CH3N/UART0_TX(RX)/SDA/TIM0_CH1/ADC_TRIG3/SIF/P1.11", "type": "bidirectional",- "description": "MCPWM channel 3 low-side / UART0 TX or RX / IIC SDA / Timer0 channel 1 / ADC trigger 3 / SIF / GPIO P1.11. Software-enabled 10 k\u03a9 pull-up."+ "description": "MCPWM channel 3 low-side / UART0 TX or RX / IIC SDA / Timer0 channel 1 / ADC trigger 3 / SIF / GPIO P1.11. Software-enabled 10 kΩ pull-up." }, { "number": "35",@@ -254,7 +254,7 @@ "number": "38", "name": "SPI_DI(DO)/SDA/P2.10", "type": "bidirectional",- "description": "SPI DI or DO / IIC SDA / GPIO P2.10. Software-enabled 10 k\u03a9 pull-up."+ "description": "SPI DI or DO / IIC SDA / GPIO P2.10. Software-enabled 10 kΩ pull-up." }, { "number": "39",@@ -272,7 +272,7 @@ "number": "41", "name": "SPI_CLK/ADC_CH14/CMP1_IP0/P2.1", "type": "bidirectional",- "description": "SPI clock / ADC channel 14 / Comparator 1 non-inv input 0 / GPIO P2.1. Software-enabled 10 k\u03a9 pull-up."+ "description": "SPI clock / ADC channel 14 / Comparator 1 non-inv input 0 / GPIO P2.1. Software-enabled 10 kΩ pull-up." }, { "number": "42",@@ -290,31 +290,31 @@ "number": "44", "name": "HALL_IN0/MCPWM_CH2P/UART1_TX(RX)/TIM1_CH0/ADC_TRIG3/CMP1_IP1/P2.4", "type": "bidirectional",- "description": "Hall sensor phase-A input / MCPWM channel 2 high-side / UART1 TX or RX / Timer1 channel 0 / ADC trigger 3 / Comparator 1 non-inv input 1 / GPIO P2.4. Software-enabled 10 k\u03a9 pull-up."+ "description": "Hall sensor phase-A input / MCPWM channel 2 high-side / UART1 TX or RX / Timer1 channel 0 / ADC trigger 3 / Comparator 1 non-inv input 1 / GPIO P2.4. Software-enabled 10 kΩ pull-up." }, { "number": "45", "name": "HALL_IN1/MCPWM_CH2N/UART1_TX(RX)/TIM1_CH1/ADC_TRIG0/CMP1_IP2/P2.5", "type": "bidirectional",- "description": "Hall sensor phase-B input / MCPWM channel 2 low-side / UART1 TX or RX / Timer1 channel 1 / ADC trigger 0 / Comparator 1 non-inv input 2 / GPIO P2.5. Software-enabled 10 k\u03a9 pull-up."+ "description": "Hall sensor phase-B input / MCPWM channel 2 low-side / UART1 TX or RX / Timer1 channel 1 / ADC trigger 0 / Comparator 1 non-inv input 2 / GPIO P2.5. Software-enabled 10 kΩ pull-up." }, { "number": "46", "name": "HALL_IN2/MCPWM_CH3P/TIM3_CH0/ADC_TRIG1/CMP1_IP3/P2.6", "type": "bidirectional",- "description": "Hall sensor phase-C input / MCPWM channel 3 high-side / Timer3 channel 0 / ADC trigger 1 / Comparator 1 non-inv input 3 / GPIO P2.6. Software-enabled 10 k\u03a9 pull-up."+ "description": "Hall sensor phase-C input / MCPWM channel 3 high-side / Timer3 channel 0 / ADC trigger 1 / Comparator 1 non-inv input 3 / GPIO P2.6. Software-enabled 10 kΩ pull-up." }, { "number": "47", "name": "SWCLK", "type": "input",- "description": "Serial-wire debug clock input. Internal 10 k\u03a9 pull-up permanently enabled."+ "description": "Serial-wire debug clock input. Internal 10 kΩ pull-up permanently enabled." }, { "number": "48", "name": "SWDIO", "type": "bidirectional",- "description": "Serial-wire debug data I/O. Internal 10 k\u03a9 pull-up permanently enabled."+ "description": "Serial-wire debug data I/O. Internal 10 kΩ pull-up permanently enabled." } ], "provenance": {@@ -428,5 +428,8 @@ "docs/lks32mc081c8t8-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }