← Commit history

Initial commit: component/lks32mc057m6s8

Ray ·b272ff33f7 ·
2 files changed +100
README.mdadded+66
@@ -0,0 +1,66 @@+# LKS32MC057M6S8++**LINKOSEMI** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SSOP-24-150mil++LKS32MC057M6S8 from LINKOSEMI, in a SSOP-24-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P0.15/P1.0 | bidirectional | Shared pin combining P0.15 and P1.0. P0.15 alt-functions: EXTI, MCPWM_CH0P, UART0_TX(RX), SPI_DI(DO), SDA, TIM0_CH0, ADC_TRIG1, CMP0_IN. P1.0 alt-functions: WK, MCPWM_CH0N, UART0_TX(RX), SPI_DI(DO). Internal 10 kΩ software-controllable pull-up to AVDD. |+| 2 | P2.7 | bidirectional | P2.7 with alt-functions ADC_CH11 / OPAx_OUT / LDO15 output. Internal 10 kΩ software-controllable pull-up. |+| 3 | P1.4 | bidirectional | P1.4 with alt-functions LRC (64 kHz RC clock output) / MCPWM_CH0P (motor PWM channel 0 high-side). |+| 4 | P0.1/P1.5 | bidirectional | Shared pin. P0.1: wake-up / EXTI / general-purpose IO. P1.5: HRC (4 MHz RC clock output) / MCPWM_CH0N (motor PWM channel 0 low-side). |+| 5 | P1.6 | bidirectional | P1.6 / MCPWM_CH1P (motor PWM channel 1 high-side). |+| 6 | P1.7 | bidirectional | P1.7 / MCPWM_CH1N (motor PWM channel 1 low-side). |+| 7 | P1.8 | bidirectional | P1.8 / MCPWM_CH2P (motor PWM channel 2 high-side). |+| 8 | P1.9 | bidirectional | P1.9 / MCPWM_CH2N (motor PWM channel 2 low-side). |+| 9 | P1.14 | bidirectional | P1.14 / OPA0_IP (op-amp 0 non-inverting input). |+| 10 | P1.15/P2.9 | bidirectional | Shared pin. P1.15: OPA0_IN (op-amp 0 inverting input). P2.9: SPI_DI(DO) / IIC SCL / ADC_CH9 / CMP0 non-inverting input channel 0 (CMP0_IP0). Internal 10 kΩ software-controllable pull-up. Note: internally ADC_CH9 samples OPA2 output when OPA remap is active - software must disable OPA remap to use ADC_CH9 directly. |+| 11 | P0.9 | bidirectional | P0.9 / OPA1_IN (op-amp 1 inverting input). |+| 12 | P0.10 | bidirectional | P0.10 / OPA1_IP (op-amp 1 non-inverting input). |+| 13 | P2.1/P2.3 | bidirectional | Shared pin. P2.1: SPI_CLK / ADC_CH8 / CMP1 non-inverting input 0 (CMP1_IP0). P2.3: CMP1_OUT / voltage reference (REF) / MCPWM_BKIN0 (PWM brake) / SPI_CS / TIM0_CH1. Internal 10 kΩ software-controllable pull-up. Note: ADC_CH8 samples OPA2 output when OPA remap is active on 051 - check remap register. |+| 14 | P2.4 | bidirectional | P2.4 with alt-functions CMP0_OUT / HALL_IN0 (Hall sensor A input) / MCPWM_CH2P (PWM ch2 high-side) / UART1_TX(RX) / TIM1_CH0 / ADC_TRIG3 / CMP1_IP1. Internal 10 kΩ software-controllable pull-up. |+| 15 | P2.5 | bidirectional | P2.5 with alt-functions CMP1_OUT / HALL_IN1 (Hall sensor B input) / MCPWM_CH2N (PWM ch2 low-side) / UART1_TX(RX) / TIM1_CH1 / ADC_TRIG0 / CMP1_IP2. Internal 10 kΩ software-controllable pull-up. |+| 16 | P2.6/P2.13 | bidirectional | Shared pin. P2.6: HALL_IN2 (Hall sensor C input) / MCPWM_CH3P / TIM3_CH0 / ADC_TRIG1 / CMP1_IP3. P2.13: SWCLK (SWD clock) / MCPWM_CH3N / UART0_TX(RX) / IIC SCL / TIM3_CH1. Internal 10 kΩ pull-up (fixed on the SWCLK pad). |+| 17 | P2.0 | bidirectional | P2.0 with alt-functions SWDIO (SWD data) / UART0_TX(RX) / IIC SDA / TIM2_CH1. Internal fixed 10 kΩ pull-up to AVDD. |+| 18 | P0.0/P0.2 | bidirectional | Shared pin. P0.0: WK / EXTI / ADC_CH4 / DAC_OUT (12-bit DAC output). P0.2: RSTN (default function, external reset input) / SPI_DI(DO). Internal 100 kΩ fixed pull-up on RSTN; recommend a 10-100 nF decoupling cap from RSTN to ground (with an optional 10-20 kΩ external pull-up to AVDD, using 100 nF). |+| 19 | AVSS | power_in | System analog/digital ground reference. |+| 20 | AVDD | power_in | Main chip supply input, 2.2-5.5 V. Recommend ≥1 μF decoupling capacitor placed close to the AVDD pin. |+| 21 | P2.11/P2.12/P0.11 | bidirectional | Shared pin combining three die-pads. P2.11: EXTI / MCPWM_CH1P / TIM2_CH0. P2.12: SPI_CS / MCPWM_CH1N / TIM2_CH1 / ADC_TRIG2. P0.11: EXTI / HALL_IN0 / TIM3_CH0 / ADC_CH6 / CMP0_IP1 / IIC SCL. Internal 10 kΩ software-controllable pull-up. |+| 22 | P0.12 | bidirectional | P0.12 with alt-functions EXTI / HALL_IN1 (Hall sensor B input) / TIM3_CH1 / ADC_CH2 / CMP0_IP2 / IIC SDA. Internal 10 kΩ software-controllable pull-up. |+| 23 | P0.13 | bidirectional | P0.13 with alt-functions EXTI / HALL_IN2 (Hall sensor C input) / ADC_CH3 / CMP0_IP3. |+| 24 | P0.14 | bidirectional | P0.14 with alt-functions EXTI / CMP0_OUT / MCPWM_BKIN1 (PWM brake) / UART0_TX(RX) / SPI_CLK / IIC SCL / TIM0_CH1 / ADC_TRIG0 / ADC_CH10 / CMP0_IP4. Internal 10 kΩ software-controllable pull-up. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LINKOSEMI |+| Package | SSOP-24-150mil |+| Category | PMIC |+| Pins | 24 |++## Ordering variants++- `LKS32MC057M6S8`+- `LKS32MC057M6S8LKS32MC051C6T8`+- `LKS32MC057M6S8LKS32MC052K6Q8`++## CAD (KiCad official)++- Symbol: `LKS32MC057M6S8`+- Footprint: `Package_SO:SSOP-24_5.3x8.2mm_P0.65mm`+- 3D model: SSOP-24-150mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LINKOSEMI datasheet](docs/lks32mc057m6s8-datasheet.pdf) (43 pp, sha256 `3df93253e82ab4d3`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lks32mc057m6s8-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lks32mc057m6s8",+  "version": "0.1.0",+  "type": "component",+  "description": "LINKOSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SSOP-24-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "lks32mc057m6s8"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lks32mc057m6s8.kicad_sym",+    "lks32mc057m6s8.kicad_mod",+    "lks32mc057m6s8.glb",+    "lks32mc057m6s8.step",+    "lks32mc057m6s8.lbr",+    "docs/hero.png",+    "docs/lks32mc057m6s8-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file