← Commit history

Initial commit: component/lh001-91q40ar2

Ray ·0ae1be9383 ·
2 files changed +415
README.mdadded+77
@@ -0,0 +1,77 @@+# LH001-91Q40AR2++**Legendsemi** · Analog Front End (AFE) · QFN-40-EP(5x5)++LH001-91Q40AR2 from Legendsemi, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AIN0 | input | ADC analog input channel 0; input voltage range ±VREF/Gain. |+| 2 | AIN1 | input | ADC analog input channel 1; input voltage range ±VREF/Gain. |+| 3 | AIN2 | input | ADC analog input channel 2; input voltage range ±VREF/Gain. |+| 4 | AIN3 | input | ADC analog input channel 3; input voltage range ±VREF/Gain. |+| 5 | AIN4 | input | ADC analog input channel 4; input voltage range ±VREF/Gain. |+| 6 | AIN5 | input | ADC analog input channel 5; input voltage range ±VREF/Gain. |+| 7 | AVDD_REG | power_out | Analog 1.8V LDO output; connect 1μF capacitor to AVSS. |+| 8 | AVDD | power_in | Analog power supply; supply range 2.4V to 3.6V. |+| 9 | AIN6 | input | ADC analog input channel 6; input voltage range ±VREF/Gain. |+| 10 | AIN7 | input | ADC analog input channel 7; input voltage range ±VREF/Gain. |+| 11 | NC | unconnected | Not connected; leave unconnected. |+| 12 | NC | unconnected | Not connected; leave unconnected. |+| 13 | NC | unconnected | Not connected; leave unconnected. |+| 14 | NC | unconnected | Not connected; leave unconnected. |+| 15 | NC | unconnected | Not connected; leave unconnected. |+| 16 | NC | unconnected | Not connected; leave unconnected. |+| 17 | AVSS | power_in | Analog ground; connect to system ground. |+| 18 | DGND | power_in | Digital ground; connect to system ground. |+| 19 | DAISY_IN | input | SPI daisy-chain input; has internal weak pull-up, leave floating if unused. |+| 20 | VPP | power_in | OTP programming power supply; ground in user mode. |+| 21 | PDEXTRST | input | Power-down or system reset input, active low; has internal weak pull-up. |+| 22 | CLKSEL | input | Master clock selection input; selects clock source; has internal weak pull-up. |+| 23 | INTB | output | Digital interrupt output signal, active low; has internal weak pull-up. |+| 24 | CLK | bidirectional | External master clock input or internal oscillator output; selectable via configuration. |+| 25 | CSB | input | SPI chip select input, active low; must be low for SPI communication. |+| 26 | DIN | input | SPI serial data input; data latched on SCLK falling edge. |+| 27 | SCLK | input | SPI serial clock input; controls data transfer timing on DIN and DOUT. |+| 28 | DOUT | output | SPI serial data output; valid when CSB is low, high-impedance when CSB is high. |+| 29 | DRDYB | output | Data ready output, active low; signals completion of ADC conversion; has weak internal pull-up. |+| 30 | START | input | ADC conversion control input; rising edge starts conversion or use SPI START command. |+| 31 | GPIO0 | bidirectional | General-purpose digital input/output pin 0; configurable direction and pull resistors. |+| 32 | GPIO1 | bidirectional | General-purpose digital input/output pin 1; configurable direction and pull resistors. |+| 33 | DVDD_REG | power_out | Digital 1.8V LDO output; connect 1μF capacitor to DGND. |+| 34 | DVDD | power_in | Digital power supply; supply range 1.7V to 3.6V. |+| 35 | VREFN | input | ADC analog reference ground; must connect to AVSS for proper operation. |+| 36 | VREFP | bidirectional | ADC analog reference voltage input; connect 10μF capacitor to VREFN. |+| 37 | VREF | power_in | Internal reference voltage output (2V or 2.5V); connect 1μF capacitor to AVSS. |+| 38 | RLDOUT | output | Right leg drive amplifier output; drives common-mode return for ECG/EEG noise reduction. |+| 39 | RLDINV | input | Right leg drive amplifier inverting input; ground if RLD function not used. |+| 40 | RLDIN | input | Right leg drive input to multiplexer or RLD amplifier non-inverting input; connect to AVDD if unused. |+| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Legendsemi |+| Package | QFN-40-EP(5x5) |+| Category | Data Acquisition |+| Pins | 41 |++## CAD (KiCad official)++- Symbol: `LH001-91Q40AR2`+- Footprint: `Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm`+- 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Legendsemi datasheet](docs/lh001-91q40ar2-datasheet.pdf) (46 pp, sha256 `19fd2c03643b81d2`, retrieved 2026-09-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lh001-91q40ar2-datasheet.pdf)
page.jsonadded+338
@@ -0,0 +1,338 @@+{+  "slug": "lh001-91q40ar2",+  "version": "0.1.0",+  "type": "component",+  "description": "Legendsemi Analog Front End (AFE), QFN-40-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "lh001-91q40ar2",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lh001-91q40ar2.kicad_sym",+    "lh001-91q40ar2.kicad_mod",+    "lh001-91q40ar2.glb",+    "lh001-91q40ar2.step",+    "lh001-91q40ar2.lbr",+    "docs/hero.png",+    "docs/lh001-91q40ar2-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LH001-91Q40AR2",+    "manufacturer": "Legendsemi",+    "package": "QFN-40-EP(5x5)",+    "pin_count": 41,+    "category": "Data Acquisition",+    "subcategory": "Analog Front End (AFE)",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6a4f94d790d1d317140631055c820c9a.pdf",+    "parts": {+      "symbol": "lh001-91q40ar2.kicad_sym",+      "footprint": "lh001-91q40ar2.kicad_mod",+      "model_3d": "lh001-91q40ar2.glb",+      "model_3d_step": "lh001-91q40ar2.step",+      "lbr": "lh001-91q40ar2.lbr"+    },+    "distributor_links": {+      "lcsc": "C42459077"+    },+    "pins": [+      {+        "number": "1",+        "name": "AIN0",+        "type": "input",+        "description": "ADC analog input channel 0; input voltage range ±VREF/Gain."+      },+      {+        "number": "2",+        "name": "AIN1",+        "type": "input",+        "description": "ADC analog input channel 1; input voltage range ±VREF/Gain."+      },+      {+        "number": "3",+        "name": "AIN2",+        "type": "input",+        "description": "ADC analog input channel 2; input voltage range ±VREF/Gain."+      },+      {+        "number": "4",+        "name": "AIN3",+        "type": "input",+        "description": "ADC analog input channel 3; input voltage range ±VREF/Gain."+      },+      {+        "number": "5",+        "name": "AIN4",+        "type": "input",+        "description": "ADC analog input channel 4; input voltage range ±VREF/Gain."+      },+      {+        "number": "6",+        "name": "AIN5",+        "type": "input",+        "description": "ADC analog input channel 5; input voltage range ±VREF/Gain."+      },+      {+        "number": "7",+        "name": "AVDD_REG",+        "type": "power_out",+        "description": "Analog 1.8V LDO output; connect 1μF capacitor to AVSS."+      },+      {+        "number": "8",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog power supply; supply range 2.4V to 3.6V."+      },+      {+        "number": "9",+        "name": "AIN6",+        "type": "input",+        "description": "ADC analog input channel 6; input voltage range ±VREF/Gain."+      },+      {+        "number": "10",+        "name": "AIN7",+        "type": "input",+        "description": "ADC analog input channel 7; input voltage range ±VREF/Gain."+      },+      {+        "number": "11",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected; leave unconnected."+      },+      {+        "number": "12",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected; leave unconnected."+      },+      {+        "number": "13",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected; leave unconnected."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected; leave unconnected."+      },+      {+        "number": "15",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected; leave unconnected."+      },+      {+        "number": "16",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected; leave unconnected."+      },+      {+        "number": "17",+        "name": "AVSS",+        "type": "power_in",+        "description": "Analog ground; connect to system ground."+      },+      {+        "number": "18",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground; connect to system ground."+      },+      {+        "number": "19",+        "name": "DAISY_IN",+        "type": "input",+        "description": "SPI daisy-chain input; has internal weak pull-up, leave floating if unused."+      },+      {+        "number": "20",+        "name": "VPP",+        "type": "power_in",+        "description": "OTP programming power supply; ground in user mode."+      },+      {+        "number": "21",+        "name": "PDEXTRST",+        "type": "input",+        "description": "Power-down or system reset input, active low; has internal weak pull-up."+      },+      {+        "number": "22",+        "name": "CLKSEL",+        "type": "input",+        "description": "Master clock selection input; selects clock source; has internal weak pull-up."+      },+      {+        "number": "23",+        "name": "INTB",+        "type": "output",+        "description": "Digital interrupt output signal, active low; has internal weak pull-up."+      },+      {+        "number": "24",+        "name": "CLK",+        "type": "bidirectional",+        "description": "External master clock input or internal oscillator output; selectable via configuration."+      },+      {+        "number": "25",+        "name": "CSB",+        "type": "input",+        "description": "SPI chip select input, active low; must be low for SPI communication."+      },+      {+        "number": "26",+        "name": "DIN",+        "type": "input",+        "description": "SPI serial data input; data latched on SCLK falling edge."+      },+      {+        "number": "27",+        "name": "SCLK",+        "type": "input",+        "description": "SPI serial clock input; controls data transfer timing on DIN and DOUT."+      },+      {+        "number": "28",+        "name": "DOUT",+        "type": "output",+        "description": "SPI serial data output; valid when CSB is low, high-impedance when CSB is high."+      },+      {+        "number": "29",+        "name": "DRDYB",+        "type": "output",+        "description": "Data ready output, active low; signals completion of ADC conversion; has weak internal pull-up."+      },+      {+        "number": "30",+        "name": "START",+        "type": "input",+        "description": "ADC conversion control input; rising edge starts conversion or use SPI START command."+      },+      {+        "number": "31",+        "name": "GPIO0",+        "type": "bidirectional",+        "description": "General-purpose digital input/output pin 0; configurable direction and pull resistors."+      },+      {+        "number": "32",+        "name": "GPIO1",+        "type": "bidirectional",+        "description": "General-purpose digital input/output pin 1; configurable direction and pull resistors."+      },+      {+        "number": "33",+        "name": "DVDD_REG",+        "type": "power_out",+        "description": "Digital 1.8V LDO output; connect 1μF capacitor to DGND."+      },+      {+        "number": "34",+        "name": "DVDD",+        "type": "power_in",+        "description": "Digital power supply; supply range 1.7V to 3.6V."+      },+      {+        "number": "35",+        "name": "VREFN",+        "type": "input",+        "description": "ADC analog reference ground; must connect to AVSS for proper operation."+      },+      {+        "number": "36",+        "name": "VREFP",+        "type": "bidirectional",+        "description": "ADC analog reference voltage input; connect 10μF capacitor to VREFN."+      },+      {+        "number": "37",+        "name": "VREF",+        "type": "power_in",+        "description": "Internal reference voltage output (2V or 2.5V); connect 1μF capacitor to AVSS."+      },+      {+        "number": "38",+        "name": "RLDOUT",+        "type": "output",+        "description": "Right leg drive amplifier output; drives common-mode return for ECG/EEG noise reduction."+      },+      {+        "number": "39",+        "name": "RLDINV",+        "type": "input",+        "description": "Right leg drive amplifier inverting input; ground if RLD function not used."+      },+      {+        "number": "40",+        "name": "RLDIN",+        "type": "input",+        "description": "Right leg drive input to multiplexer or RLD amplifier non-inverting input; connect to AVDD if unused."+      },+      {+        "number": "41",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 41 added from the footprint"+        ],+        "pages_sent": 46,+        "cost_usd": 0.6063,+        "at": "2026-09-17T19:05:03"+      },+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/6a4f94d790d1d317140631055c820c9a.pdf",+        "pages": 46,+        "sha256": "19fd2c03643b81d2",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 41,+        "described": 41,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file