← Commit history
lgs63042b5: factory component page (tier=lcsc)
4 files changed
+24−21
README.md+5−5@@ -8,11 +8,11 @@ LGS63042B5 from Legend Si, in a SOT-23-5. Pinout and pin descriptions extracted | Pin | Name | Type | Function | |---|---|---|---|-| 1 | SW | output | Internal power switch node (drain of the integrated 350mOhm low-side NMOS). Externally connected to the power inductor and Schottky freewheeling diode. Rated -0.3V to +60V vs GND; max switch current 3A. |-| 2 | GND | power_in | Device ground reference. All voltages in the datasheet are referenced to this pin. |-| 3 | EN | input | Enable / dimming input. Accepts DC or PWM square wave for dimming. Rise threshold ~0.5V enables output, fall below ~0.4V shuts down; ~800kOhm internal pull-down. On the '42' variant (this part) drives digital PWM dimming from 100Hz to 100kHz. Absolute max -0.3V to +6V. |-| 4 | CSN | input | LED current detection / sense pin. Connect to the LED-side node of the external Rsence sampling resistor. Output current I_OUT = (V_OUT(VIN) - V_CSN)/Rsence, with typical (V_OUT(VIN)-V_CSN) = 0.2V (0.195V min, 0.205V max). Valid range VIN-6V to VIN+0.3V. |-| 5 | VIN(OUT) | power_in | Dual-role output voltage detection / input voltage connection pin. Connects the LED current sampling resistor (Rsence) to the CSN end. Used as the input voltage detection point in buck circuits and as the output voltage connection point in boost / buck-boost applications. Operating range 3.0V-60V; absolute max -0.3V to +60V. |+| 1 | SW | output | Internal power switch node (drain of internal 350mΩ low-side MOSFET). Externally connected to the power inductor and Schottky diode. Absolute max voltage to GND: -0.3V to 60V. Peak current limit typ. 1.7A (max 2.1A). |+| 2 | GND | power_in | Device ground reference for control and power return. |+| 3 | EN | input | Enable / dimming input pin. On the 63042 variant this accepts a digital PWM square wave (100Hz to 100kHz) for dimming; rising-edge threshold 0.31-0.54V (typ 0.5V), falling-edge threshold 0.25-0.38V (typ 0.35V). Absolute max to GND: -0.3V to 6V. Internal ~800kΩ pull-down; do not leave floating. |+| 4 | CSN | input | LED current sense pin. Connects to the LED-side terminal of the external sampling resistor R_Sence. Output current is set by I_OUT = (V_OUT(VIN) − V_CSN) / R_Sence, with V_OUT(VIN)−V_CSN typ. 0.2V (range 0.195-0.205V). Absolute max to GND: VIN−6V to VIN+0.3V. |+| 5 | VIN/OUT | power_in | Combined input supply / output-voltage sense pin. Connects the LED current-sampling resistor to the CSN end. Acts as the input voltage supply/sense node in buck mode and as the output voltage sense node in boost/buck-boost applications. Operating range 3.0V to 60V; absolute max to GND -0.3V to 60V. Decouple with a 4.7µF/100V ceramic (X5R/X7R). | ## Key specifications
lgs63042b5.kicad_sym+1−1@@ -21,7 +21,7 @@ (number "3" (effects (font (size 1.27 1.27)))) ) (pin power_in line (at 17.78 0.00 180) (length 5.08)- (name "VIN(OUT)" (effects (font (size 1.27 1.27))))+ (name "VIN/OUT" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27)))) ) (pin input line (at 17.78 -2.54 180) (length 5.08)
lgs63042b5.lbr+11−5@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Legend Si LED Drivers, SOT-23-5</description> <packages> <package name="SOT-23-5"> <description>5 pads, 3.6 x 2.5 mm. SOT, 5 Pin</description>@@ -84,6 +84,7 @@ </packages> <symbols> <symbol name="LGS63042B5">+ <description>Legend Si LED Drivers, SOT-23-5</description> <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -93,13 +94,13 @@ <pin name="SW" x="-17.78" y="2.54" length="middle" direction="out"/> <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/> <pin name="EN" x="-17.78" y="-2.54" length="middle" direction="in"/>- <pin name="VIN_OUT" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+ <pin name="VIN/OUT" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> <pin name="CSN" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="LGS63042B5" prefix="U">- <description></description>+ <description>Legend Si LED Drivers, SOT-23-5</description> <gates> <gate name="G$1" symbol="LGS63042B5" x="0" y="0"/> </gates>@@ -109,10 +110,15 @@ <connect gate="G$1" pin="SW" pad="1"/> <connect gate="G$1" pin="GND" pad="2"/> <connect gate="G$1" pin="EN" pad="3"/>- <connect gate="G$1" pin="VIN_OUT" pad="5"/>+ <connect gate="G$1" pin="VIN/OUT" pad="5"/> <connect gate="G$1" pin="CSN" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="LGS63042B5" constant="no"/>+ <attribute name="MANUFACTURER" value="Legend Si" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+7−10@@ -32,31 +32,31 @@ "number": "1", "name": "SW", "type": "output",- "description": "Internal power switch node (drain of the integrated 350mOhm low-side NMOS). Externally connected to the power inductor and Schottky freewheeling diode. Rated -0.3V to +60V vs GND; max switch current 3A."+ "description": "Internal power switch node (drain of internal 350m\u03a9 low-side MOSFET). Externally connected to the power inductor and Schottky diode. Absolute max voltage to GND: -0.3V to 60V. Peak current limit typ. 1.7A (max 2.1A)." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Device ground reference. All voltages in the datasheet are referenced to this pin."+ "description": "Device ground reference for control and power return." }, { "number": "3", "name": "EN", "type": "input",- "description": "Enable / dimming input. Accepts DC or PWM square wave for dimming. Rise threshold ~0.5V enables output, fall below ~0.4V shuts down; ~800kOhm internal pull-down. On the '42' variant (this part) drives digital PWM dimming from 100Hz to 100kHz. Absolute max -0.3V to +6V."+ "description": "Enable / dimming input pin. On the 63042 variant this accepts a digital PWM square wave (100Hz to 100kHz) for dimming; rising-edge threshold 0.31-0.54V (typ 0.5V), falling-edge threshold 0.25-0.38V (typ 0.35V). Absolute max to GND: -0.3V to 6V. Internal ~800k\u03a9 pull-down; do not leave floating." }, { "number": "4", "name": "CSN", "type": "input",- "description": "LED current detection / sense pin. Connect to the LED-side node of the external Rsence sampling resistor. Output current I_OUT = (V_OUT(VIN) - V_CSN)/Rsence, with typical (V_OUT(VIN)-V_CSN) = 0.2V (0.195V min, 0.205V max). Valid range VIN-6V to VIN+0.3V."+ "description": "LED current sense pin. Connects to the LED-side terminal of the external sampling resistor R_Sence. Output current is set by I_OUT = (V_OUT(VIN) \u2212 V_CSN) / R_Sence, with V_OUT(VIN)\u2212V_CSN typ. 0.2V (range 0.195-0.205V). Absolute max to GND: VIN\u22126V to VIN+0.3V." }, { "number": "5",- "name": "VIN(OUT)",+ "name": "VIN/OUT", "type": "power_in",- "description": "Dual-role output voltage detection / input voltage connection pin. Connects the LED current sampling resistor (Rsence) to the CSN end. Used as the input voltage detection point in buck circuits and as the output voltage connection point in boost / buck-boost applications. Operating range 3.0V-60V; absolute max -0.3V to +60V."+ "description": "Combined input supply / output-voltage sense pin. Connects the LED current-sampling resistor to the CSN end. Acts as the input voltage supply/sense node in buck mode and as the output voltage sense node in boost/buck-boost applications. Operating range 3.0V to 60V; absolute max to GND -0.3V to 60V. Decouple with a 4.7\u00b5F/100V ceramic (X5R/X7R)." } ], "provenance": {@@ -120,8 +120,5 @@ "docs/lgs63042b5-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }