component
LGS63030B6
Public Made by Adomby adom
Legend Si LED Drivers, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "SW", "type": "output",- "description": "Internal low-side N-channel power switch node (350m\u03a9 typ RDS(on), 3A absolute max, up to 60V). Connect the external boost inductor and Schottky freewheeling diode here."+ "description": "Internal low-side N-channel power switch node (350mΩ typ RDS(on), 3A absolute max, up to 60V). Connect the external boost inductor and Schottky freewheeling diode here." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "FB", "type": "input",- "description": "Current-sense feedback input. Regulated to VFB = 0.2V (typ, 0.195-0.205V); LED current is set by IOUT = VFB / RSENSE via an external sense resistor to GND. Absolute max \u22120.3V to +6V; typical FB bias current 50nA."+ "description": "Current-sense feedback input. Regulated to VFB = 0.2V (typ, 0.195-0.205V); LED current is set by IOUT = VFB / RSENSE via an external sense resistor to GND. Absolute max −0.3V to +6V; typical FB bias current 50nA." }, { "number": "4", "name": "EN", "type": "input",- "description": "Enable / dimming input. Drive high (>0.5V rising) to enable the boost converter, low (<0.4V falling) for low-power sleep. Accepts DC voltage for analog dimming (0.6-1.2V range on LGS63030) or a PWM square wave (100Hz-1kHz) for digital dimming. Internal ~800k\u03a9 pull-down; absolute max \u22120.3V to +6V."+ "description": "Enable / dimming input. Drive high (>0.5V rising) to enable the boost converter, low (<0.4V falling) for low-power sleep. Accepts DC voltage for analog dimming (0.6-1.2V range on LGS63030) or a PWM square wave (100Hz-1kHz) for digital dimming. Internal ~800kΩ pull-down; absolute max −0.3V to +6V." }, { "number": "5", "name": "OVP", "type": "input",- "description": "Output overvoltage-protection sense input. Tie to a resistor divider from VOUT to GND; trigger threshold 1V typ (rising), 0.86V (falling). Set VOUT_OVP = (1 + R1/R2) \u00d7 1V; recommended 1.3-1.5\u00d7 nominal VOUT. Absolute max \u22120.3V to +6V - keep the pin below 1V in normal operation."+ "description": "Output overvoltage-protection sense input. Tie to a resistor divider from VOUT to GND; trigger threshold 1V typ (rising), 0.86V (falling). Set VOUT_OVP = (1 + R1/R2) × 1V; recommended 1.3-1.5× nominal VOUT. Absolute max −0.3V to +6V - keep the pin below 1V in normal operation." }, { "number": "6", "name": "VIN", "type": "power_in",- "description": "Main power input, 3.0-60V (absolute max \u22120.3V to +60V). UVLO rises ~3.0V, falls ~2.6V. Bypass with a 4.7\u00b5F or larger X5R/X7R ceramic capacitor placed as close to VIN and GND as possible."+ "description": "Main power input, 3.0-60V (absolute max −0.3V to +60V). UVLO rises ~3.0V, falls ~2.6V. Bypass with a 4.7µF or larger X5R/X7R ceramic capacitor placed as close to VIN and GND as possible." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/lgs63030b6-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }