← Commit history

led2000dr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·8e28e2cbe4 · ·parent 6ed60db
1 file changed +75−1
page.json+75−1
@@ -33,5 +33,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LED2000DR",+    "manufacturer": "STMicroelectronics",+    "package": "SO-8",+    "pin_count": 8,+    "category": "LED Drivers",+    "datasheet": "https://www.st.com/resource/en/datasheet/led2000dr.pdf",+    "parts": {+      "symbol": "led2000dr.kicad_sym",+      "footprint": "led2000dr.kicad_mod",+      "model_3d": "led2000dr-etched.glb",+      "model_3d_plain": "led2000dr.glb",+      "model_3d_step": "led2000dr-etched.step",+      "model_3d_step_plain": "led2000dr.step",+      "lbr": "led2000dr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Regulator switching pin. Connects to the external inductor; the internal high-side and low-side synchronous power MOSFETs alternately switch this node between VINSW and PGND at the 850 kHz oscillator frequency to deliver regulated LED current."+      },+      {+        "number": "2",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground. Return path for the internal low-side synchronous rectifier MOSFET; carries the high pulsed switching current and should be tied to the input capacitor ground with a short, wide trace."+      },+      {+        "number": "3",+        "name": "VINA",+        "type": "power_in",+        "description": "Analog circuitry power supply connection. Feeds the internal reference, bandgap, oscillator, error amplifier, and control logic. Operating range 3.0 V to 18 V; absolute max -0.3 V to 20 V. Typically bypassed with a small local ceramic filter capacitor (e.g. 100 nF) to signal ground."+      },+      {+        "number": "4",+        "name": "DIM",+        "type": "input",+        "description": "Dimming/enable control input. Logic low (< 0.4 V) prevents switching activity, logic high (> 1.2 V) enables it. Apply a square wave for PWM LED brightness dimming. Tie to VINA if unused. Input bias current ~2 uA typ.; absolute max -0.3 V to VINA."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Feedback input (inverting input of the internal transconductance error amplifier). Connect a sense resistor RS = 100 mV / ILED between this pin and ground to program the regulated LED current. Internal reference 100 mV typ.; input bias current 600 nA max; absolute max -0.3 V to 2.5 V, ±1 mA."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog circuitry ground connection. Return for the low-noise analog reference, error amplifier, and control blocks. Should be tied to signal-ground island and joined to PGND at a single quiet point (typically under the output capacitor)."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin present only on the SO8-BW package. Datasheet instruction is to connect this pin directly to AGND; provides additional ground bonding for the analog side of the die."+      },+      {+        "number": "8",+        "name": "VINSW",+        "type": "power_in",+        "description": "Power input voltage supplying the internal high-side power MOSFET drain. Operating range 3.0 V to 18 V; absolute max -0.3 V to 20 V. Requires a low-ESR input decoupling capacitor placed as close as possible to this pin and PGND."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}