← Commit history

Initial commit: component/led2000dr

Ray ·2cbda8cc54 ·
2 files changed +82
README.mdadded+48
@@ -0,0 +1,48 @@+# LED2000DR++**STMicroelectronics** · LED Drivers · SO-8++LED2000DR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Regulator switching pin. Connects to the external inductor; the internal high-side and low-side synchronous power MOSFETs alternately switch this node between VINSW and PGND at the 850 kHz oscillator frequency to deliver regulated LED current. |+| 2 | PGND | power_in | Power ground. Return path for the internal low-side synchronous rectifier MOSFET; carries the high pulsed switching current and should be tied to the input capacitor ground with a short, wide trace. |+| 3 | VINA | power_in | Analog circuitry power supply connection. Feeds the internal reference, bandgap, oscillator, error amplifier, and control logic. Operating range 3.0 V to 18 V; absolute max -0.3 V to 20 V. Typically bypassed with a small local ceramic filter capacitor (e.g. 100 nF) to signal ground. |+| 4 | DIM | input | Dimming/enable control input. Logic low (< 0.4 V) prevents switching activity, logic high (> 1.2 V) enables it. Apply a square wave for PWM LED brightness dimming. Tie to VINA if unused. Input bias current ~2 uA typ.; absolute max -0.3 V to VINA. |+| 5 | FB | input | Feedback input (inverting input of the internal transconductance error amplifier). Connect a sense resistor RS = 100 mV / ILED between this pin and ground to program the regulated LED current. Internal reference 100 mV typ.; input bias current 600 nA max; absolute max -0.3 V to 2.5 V, ±1 mA. |+| 6 | AGND | power_in | Analog circuitry ground connection. Return for the low-noise analog reference, error amplifier, and control blocks. Should be tied to signal-ground island and joined to PGND at a single quiet point (typically under the output capacitor). |+| 7 | GND | power_in | Ground pin present only on the SO8-BW package. Datasheet instruction is to connect this pin directly to AGND; provides additional ground bonding for the analog side of the die. |+| 8 | VINSW | power_in | Power input voltage supplying the internal high-side power MOSFET drain. Operating range 3.0 V to 18 V; absolute max -0.3 V to 20 V. Requires a low-ESR input decoupling capacitor placed as close as possible to this pin and PGND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SO-8 |+| Category | LED-drv |+| Pins | 8 |++## Ordering variants++- `LED2000DR`+- `LED2000DRPUR`++## CAD (KiCad official)++- Symbol: `LED2000DR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/led2000dr.pdf) (None pp, sha256 `3bef10623eb3b5eb`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/led2000dr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "led2000dr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics LED Drivers, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led-drv",+    "led2000dr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "led2000dr.kicad_sym",+    "led2000dr.kicad_mod",+    "led2000dr.glb",+    "led2000dr.step",+    "led2000dr.lbr",+    "docs/hero.png",+    "docs/led2000dr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file