← Commit history
le50cd-tr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+75−1
page.json+75−1@@ -31,5 +31,79 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LE50CD-TR",+ "manufacturer": "STMicroelectronics",+ "package": "SOIC-8-150mil",+ "pin_count": 8,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.st.com/resource/en/datasheet/le50cd-tr.pdf",+ "parts": {+ "symbol": "le50cd-tr.kicad_sym",+ "footprint": "le50cd-tr.kicad_mod",+ "model_3d": "le50cd-tr-etched.glb",+ "model_3d_plain": "le50cd-tr.glb",+ "model_3d_step": "le50cd-tr-etched.step",+ "model_3d_step_plain": "le50cd-tr.step",+ "lbr": "le50cd-tr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated 5 V output. Typ. 5 V (±2% at 25 °C for the C grade), up to 100 mA. Requires a 2.2 µF output capacitor (ESR 0.1-10 Ω) for loop stability."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / thermal pad. Pins 2, 3, 6 and 7 are internally fused to the die-attach pad and must be connected to a ground copper area for heatsinking."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / thermal pad. Internally fused to the die-attach pad; tie to ground copper for heatsinking."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Leave floating or tie to ground."+ },+ {+ "number": "5",+ "name": "INHIBIT",+ "type": "input",+ "description": "TTL-compatible shutdown logic input. VIH ≥ 2 V puts the regulator in ON mode; VIL ≤ 0.8 V forces OFF (standby, IQ ≈ 50 µA). Input current typ. 10 µA at VC = 6 V. If left floating the regulator is ON; when the inhibit function is not used, tie to GND to avoid noise pickup."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / thermal pad. Internally fused to the die-attach pad; tie to ground copper for heatsinking."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / thermal pad. Internally fused to the die-attach pad; tie to ground copper for heatsinking."+ },+ {+ "number": "8",+ "name": "VIN",+ "type": "power_in",+ "description": "Unregulated supply input. Operating range up to 18 V (absolute max 20 V). Dropout typ. 0.2 V (max 0.4 V at 100 mA). Bypass with 0.1 µF close to the pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}