← Commit history

ldln025m33r: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·3d6f9d91c8 · ·parent e7e5c75
2 files changed +86−6
package.json+44−4
@@ -65,7 +65,7 @@         "number": "3",         "name": "EN",         "type": "input",-        "description": "Enable input; set high (VIH = 1.2 V minimum) to turn on device, set low (VIL = 0.4 V maximum) to turn off device; internally pulled down via 1 M\u03a9 resistor."+        "description": "Enable input; set high (VIH = 1.2 V minimum) to turn on device, set low (VIL = 0.4 V maximum) to turn off device; internally pulled down via 1 MΩ resistor."       },       {         "number": "4",@@ -77,7 +77,7 @@         "number": "5",         "name": "VOUT",         "type": "output",-        "description": "LDO regulated output voltage 3.3 V \u00b12.0% over -40 \u00b0C to 125 \u00b0C, maximum output current 250 mA, typical dropout voltage 120 mV at 250 mA load."+        "description": "LDO regulated output voltage 3.3 V ±2.0% over -40 °C to 125 °C, maximum output current 250 mA, typical dropout voltage 120 mV at 250 mA load."       }     ],     "provenance": {@@ -112,6 +112,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ldln025m33r.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ldln025m33r-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f01d2f894c5ed92cac19ff5e878306c7d6bfbdfc3cec98b86f3902bc26229a33",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -97,7 +97,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ldln025m33r.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ldln025m33r-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f01d2f894c5ed92cac19ff5e878306c7d6bfbdfc3cec98b86f3902bc26229a33",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -144,4 +184,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}